Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Product Highlights
- NEOFLON EFEP RP-5000AS which owns low melting point is a copolymer of ETFE and additional third monomer. It is conductive
- Due to its low melting point, a laminated product such as a multi-layer tube and film with EVOH can be obtained by co-extrusion molding.
- Hot melt adhesion to the other plastics such as Polyamide with its reactive group.
- Excellent process ability and the good chemical resistance as ETFE.
- It can be melt-molded as a thermoplastic resin by extrusion molding, injection molding, compression molding and the like
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Properties
- Note
*The above values are representative values, not guaranteed values.
Value | Units | Test Method / Conditions | |
Elongation | 460 | % | ASTM D 3159 Compliant |
Melting Point | 195 | °C | ASTM D 3159 Compliant |
MFR (at 265°C, 49N Load) | 25 | g/10min | — |
Resistance Value (Insulation Resistance Tester, 7cm long) | 0.2 | MΩ | DAIKIN Method |
Specific Gravity | 1.75 | — | ASTMD 729 Compliant |
Tensile Modulus | 700 | MPa | ASTM D 3159 Compliant |
Tensile Strength | 40 | MPa | ASTM D 3159 Compliant |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the notes on SDS and labels before use.
- This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
Packaging & Availability
- Packing Specification
50 Kg