Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Coating Type
- Applications
Normally used as delivered. In emulsion paint system we recommend adding half to the pigment grind and the balance to the final blending. The amount required depends of course on the particular application. A typical addition level would be between 0.1 and 0.5%, depending on the severity of the foam problem. However, in all cases levels should be optimized by trial.
Properties
- Physical Form
- Appearance
- Grey opaque liquid
- Typical Properties
- General Properties
- DeCAL 5012 is an excellent foam control agent for many aqueous systems.
- It is used very successfully in water based paints, paper coatings, polymer latices and adhesives.
- It is effective over a wide range of pH and temperatures.
Value | Units | Test Method / Conditions | |
pH (1% solution) | 6 - 8 | — | — |
Solubility in Water | Moderately dispersible | — | — |
Density (at 20°C) | 0.91 | g/cm³ | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Information
The usual precautions in handling chemicals should be observed. Any contact with the skin and eyes should be washed immediately with copious amounts of cold water.
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage Condition
DeCAL 5012 should be stored between 5°C and 30°C to prevent freezing.