Products

DCL A3RJ Indanthrone Blue, PB.60 is a strong red shade and highly saturated blue pigment that combines very good tinctorial properties with excellent fastness properties. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks and coating applications.

DCL 1222 Quinacridone Magenta, PR.122 (Yellow shade), is a high-performance pigment that retains all the typical properties of quinacridone pigments, while offering a more yellowish and brighter masstone and a noticeably yellower, brighter, and stronger tint compared to the 1229 grade.

DCL 2217 Diarylide Yellow, PY.17 is a strong, transparent green shade of Diarylide Yellow that offers excellent value for use in various printing ink applications, such as water-based, nitrocellulose-based, and polyamide-based inks and metal deco printing, as well as in some plastics applications, including polyolefins, printing on PVC film, and polyurethane foams, and in some air-dry industrial coatings and textile printing.

DCL AG401A Luster Black, 10 - 60 m is a silver gray translucent pearlescent pigment that boasts a brilliant finish, and it is approved by the FDA under Section 178-3297. The mixture that comprises this pigment is made up of mica, titanium dioxide, and carbon black, resulting in a silver gray powder as its appearance.

DCL 1812 Naphthol Red, PR.112 is a deep shade red naphthol with very good lightfastness even in medium shades. 1812 is somewhat sensitive to blooming at very low concentrations. It also exhibits good overall resistance properties, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks and coating applications.

DCL AG6331 Pure Gold, 10 - 60 m is a gold pearlescent pigment with a bright finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

DCL 7019 Quinacridone Red Violet, PV.19 is a high-performance pigment developed for use in industrial coatings, automotive refinishing, and coil coatings. This reddish-violet shade is also suitable for plastic and ink applications, and is a close match to Clariant Red E5B. It is used in various high-end paint and plastic applications where excellent fastness properties are required, and is also FDA-approved.

DCL 410 Carbon Black, PBk.6 (Granular) is a smaller particle size, low cost granular carbon black pigment. It is the most jet of our low-cost carbon blacks however, it has the highest viscosity. 410 is particularly suitable for coatings, plastics requiring excellent UV properties, and solvent-based inks.

DCL 2188 Naphthol Red, PR.188 is a bright, yellow-shaded naphthol red with good flow properties, bleed resistance, lightfastness, and weather fastness. It is recommended for higher-grade exterior industrial paints, exterior trade sales coatings, colorant systems for in-plant tinting or machine colorants, printing inks, mass coloration of paper, paper surface coating, paper pulp coloration, wax crayons, and inks for wallpaper use. It is also recommended for use in plastics.

Inhibisil® 75 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

DCL 5703 Phthalocyanine Blue, PB.15:3 is a type of phthalocyanine blue that boasts high strength and a non-crystallizing green shade. With exceptional resistance properties, this product is widely used in various applications, especially in water flexo inks and UV inks.

DCL 7354 DPP Red, PR.254 is a yellow-shaded DPP that offers excellent opacity, high color saturation, weather resistance, heat stability, acid, alkali, and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, and is FDA compliant for indirect food contact plastic applications.

DCL 1274 Hansa Yellow, PY.74 is a medium-shade Hansa Yellow with good lightfastness and opacity. It has various applications, including decorative and industrial coatings, as well as water flexo, solvent flexo, and UV inks. It features good overall resistance properties, weather fastness, and heat stability.

DCL 1319 Quinacridone Red Violet, PV.19 (E3B-70 type), is a high-quality pigment known for its outstanding fastness, heat stability, and resistance properties. This opaque, yellow-shaded quinacridone is slightly more opaque and yellower than the 1219 Quinacridone Red Violet 19 grade.

DCL 2538 Quinophthalone Yellow, PY.138 is an opaque, green shade yellow with low viscosity in liquid systems and excellent light and weather fastness. It is greener than 2338 and exhibits high hiding power and good dispersibility. 2538 is FDA-approved (21 CFR Part 178.3297).

DCL 5154 Phthalocyanine Blue, PB.15:4 is a beta-type, non-crystallizing, non-flocculating green-shade phthalocyanine blue, recommended for various coatings and printing ink applications. It is FDA-approved (Section 178.3297) and is recommended for use in various industrial paint applications, such as air-dry and baking alkyds, as well as nitrocellulose and polyamide inks.

Inhibisil® 73 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

DCL Yellow 83P Diarylide Yellow, PY.83 is a red shade yellow pigment with excellent gloss and transparency in solvent based inks. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of ink applications.

DCL 7254 DPP Red, PR.254 (BO type) is a medium red shade DPP pigment that offers excellent masstone weather fastness, heat stability, acid, alkali and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, especially exterior uses where excellent fastness properties are required. Moreover, this pigment is FDA-approved.

DCL 490-P Extra Strong Jet Black, PBk.6 (Powder, Stir in dispersible) is a highly dispersible black powder composed of carbon black. It is recommended for use in decorative coatings, water-flexo inks, and water-based systems, especially in concrete and roofing granules.

DCL AG6351 Shimmer Gold, 10 - 100 m is a gold pearlescent pigment with a bright finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

DCL AG173 Silk, 10 - 60 m is a silver-white transulcent pearlescent pigment with a brilliant finish. This product is a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL Orange GX Pyrazolone Orange, PO.13, is an orange pigment that provides a bright red shade of orange, commonly used in offset and aqueous inks. Additionally, DCL Orange GX is versatile enough to be used in a wide range of paint and plastic applications.

DCL 3777 Phthalocyanine Green, PG.7 (blue shade) is a bright, blue-shaded phthalocyanine with excellent overall properties. The product is FDA-approved (Section 178.3297) and recommended for various applications in inks, coatings, and plastics. It can be easily dispersed in plastics, coatings, and water-based flexo inks.

DCL AG123 Fine Satin Silver, 5 - 25 m is a silver-white transulcent pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL 2111 Isoindolinone Yellow, PY.110 is a semi-opaque, red shade yellow pigment with excellent lightfastness and heat stability. It is FDA-approved (Section 178.3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a range of coating, plastic, ink and rubber applications.

DCL 1836 Azo Orange, PO.36 is an opaque grade of PO.36 that exhibits a reddish-shaded orange color with excellent light and weather fastness characteristics. 1836 provides high opacity and good flow properties in a variety of plastics, coatings, and inks.

DCL 3136 Phthalocyanine Green, PG.36 is a strong, yellow-shaded, fully brominated phthalocyanine green pigment of excellent value, tinting strength, and color purity. 3136 has excellent overall properties. It is recommended to be used in a wide range of plastic, ink, and coating applications.

DCL A3R Indanthrone Blue, PB.60 is a red shade of highly saturated blue that combines very good tinctorial properties with excellent fastness properties. DCC Blue A3R is a highly transparent blue suitable for opaque and effect shades and is used in high-end coatings, plastics, and ink applications.

DCL 2283 Opaque Yellow, PY.83 is a medium-shaded diarylide yellow offering good opacity, lightfastness, excellent flow properties, and tinting strength. It is recommended to be used in inkjet and UV inks as well as automotive, aerospace, industrial, and powder coating applications.

DCL 0013-473 Hansa Yellow, PY.73 is a green shade hansa yellow with moderate opacity and easy to disperse in most coatings and printing ink applications. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a highly reliable and versatile choice for a wide range of inks and coating applications.

DCL 1073-A DPP Orange, PO.73 is a medium shade opaque orange pigment with very good light and chemical resistance. This pigment is mainly used in the following applications: Plastics such as PVC, PP, PS, PE and PET. Automotive/Aerospace, powder and industrial coatings. Solvent flexo inks Rubber products

DCL CARMINE B Naphthol Red, PR.5 is a bright blue-shaded red pigment used primarily in offset and water based inks. It also finds use in decorative and industrial paints. It also exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability.

DCL 2139 Isoindoline Yellow, PY.139 is a reddish shade yellow pigment with excellent opacity and lightfastness in deep shades. It is recommended for general industrial coatings where good rheology and opacity are required and can also be used in combination with inorganics as a replacement for chrome yellow medium, as well as in automotive refinishes and high-quality printing ink applications such as inkjet and UV inks.

DCL 2113 Pyrazolone Orange, PO.13 is a bright, clean, transparent pyrazolone orange pigment with excellent tinting strength. 2113 has fair lightfastness in masstone/deep shades and is poor in tints. It is recommended to be used in a wide range of plastic, ink, and coating applications.

DCL 1070 Naphthol Red, PR.170 is a very brilliant, opaque, strong, bright yellow shade of naphthol red pigment. It exhibits very good lightfastness, chemical resistance and flow properties. This makes it a highly reliable and versatile choice for a wide range of inks and coating applications.