Products

TYTAN™ TAA is a titanium chelate whose alkoxy groups can react with resins to enhance adhesion and/or crosslinking, while the chelating agents stabilize the molecule. TYTAN™ TAA has an exceptional balance between reactivity and crosslinking/adhesion-improvement properties, which makes it highly suitable for significantly enhancing the performance properties of industrial coatings on challenging modern polymeric substrates, glass, and some metals.

DeCAL 2098 is an anionic superplasticizer that has been modified with polyacrylate to achieve maximum efficiency. It is highly suitable for use in mortars, concretes, self-leveling systems, adhesives, and grouts. Compared to conventional plasticizers, DeCAL 2098 has a significantly higher deflocculation effect, which allows it to maintain the dispersed state for longer periods.

IMSIL® A-25 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

DeCAL 4201 is an acrylic binder ideally suited for use in water-based flexographic inks. The product exists as an alkali-soluble carboxylated copolymer emulsion but can also be supplied in its neutralized varnish form as DeCAL 4202. Inks prepared using DeCAL 4201 possess excellent machine stability/resolubility, viscosity/pH stability, favorable viscosity/dilution curves, and excellent pigment wetting characteristics.

Beaverwhite 325 is a functional mineral used in the manufacture of paper, paints, ceramics, plastics, etc. It is mainly composed of talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite. The product is odorless and has a white or off-white to light gray color.

TYTAN™ EHT is a titanium alkoxide. TYTAN™ EHT is used in a variety of industrial applications, e.g., as an esterification and transesterification catalyst, as an olefin polymerization catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds, and as a component of heat and corrosion resistant paints.

AFCONA 3280 is a special modified polysiloxane that is soluble in aliphatic and aromatic hydrocarbons, esters and ketones, but insoluble in water. It offers slip, defoaming, and improvement of surface characteristics without hurting intercoat adhesion. Additionally, it offers better hot water resistance than other polyether modified polysiloxanes.

Portaflame® CA 7 grade is produced from carefully selected colemanite, which is a naturally occurring hydrated calcium borate. This light gray powder is odorless and decomposes at 340°C. It is used as a flame retardant for paints, polymers, rubber, and bitumen.

Portalum® A 180 is produced from refractory agglomerated super calcined (RASC) bauxite. The main constituent is the mineral corundum. It enhances abrasion and chemical resistance in coatings, while its high hardness and density are valued in abrasive/friction applications such as brake pads. Sibelco Portalum calcined bauxite (aluminum oxide) is produced from refractory agglomerated super calcined (RASC) bauxite.

AFCONA 2028 is a moderate defoamer that is easy to incorporate. AFCONA 2028 prevents the formation of foam and blisters during the manufacturing and application of solvent-based wood finishes.AFCONA 2028 is particularly suitable as a defoamer for curtain coatings and may also be used during production. When foam causes a problem during packaging, AFCONA 2028 may be added slowly while stirring, which will speed up the bubble-breaking process. For this application, AFCONA 2028 is more user-friendly and easier to handle than AFCONA 2022 because it is less sensitive to crater formation and other well-known defoamer side effects.

AFCONA 5515 is a dispersing additive for a wide range of water-based coatings. The product is especially suited for the dispersion of inorganic pigments. It is a dispersing additive for a wide range of water-based coatings. The product is especially suited for the dispersion of inorganic pigments.

Mistron® 105 Compacted is a functional additive with high purity that is particularly suitable for adhesives, caulks, mastics, and sealants. This additive enhances the mechanical properties of these products and imparts hydrophobicity and barrier properties, thereby improving their corrosion resistance. Comprised primarily of talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite, the product is odorless and has a white or off-white to light gray color.

DeCAL 2020 is a rheology modifier that enables the formulation of paints with a Newtonian rheology, making it suitable for use in a wide range of paints, from flat to high gloss. To achieve the best balance of flow and sag resistance, it can be used in combination with other thickeners of natural or synthetic origin.

ACCESS® XTMS 200 is a silicone-based water repellent offered by Access Rudolf, designed to provide excellent protection for various porous substrates. This product can be applied to concrete, brick, natural stone, and other porous materials to create a hydrophobic barrier that repels water and prevents staining. ACCESS® XTMS 200 is easy to apply and offers long-lasting protection against water damage and weathering.

Casiflux M 50050 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Crys-Talc® 2H-2HC is a high-brightness, high-purity, platy, coarse talc that is recommended for improving stiffness, HDT, and dimensional stability in polymers. It is used in polyethylene, polypropylene, and PVC-based applications with loading levels up to 40% or higher when improved color is critical.

DeCAL 4288 is a low molecular weight carboxylated acrylic copolymer that can carry very high levels of pigment, providing maximum color development properties at these loadings. To obtain the full benefits, it's essential to use the highest possible pigment binder ratios and the highest possible pigment loading of DeCAL 4288. It's common to prepare a neutralized solution using either ammonia or monoethanolamine in formulations where slower drying or better resolubility is required.

Dar-Tech Hauthane HD-2209 is an aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever a high level of gloss and clarity is required.

AFCONA 5290 is a 100% solid dispersant created for high-solid systems and formulations that are facing VOC limitations. It is suitable for all solvent-based systems ranging from low to high polarity, including air-dry alkyd. It has very good pigment stability and performance. It gives good viscosity reduction and high color strength. AFCONA 5290 is provided with almost 100% active ingredient; therefore, it is an excellent dispersant for high-solid coatings like polyurethane, epoxy and UV coatings.

AFCONA 6700 is an anti-gel additive for air- drying alkyds and heat-cured coating systems. In air-drying alkyd paints, the ketoxime in AFCONA 6700 forms a protective layer on the surface of the paint to reduce the oxidation caused by oxygen in the air.

AFCONA 3755 is a leveling and flow control agent for solvent-based coatings with very effective defoaming properties. It is a pure polyacrylic leveling agent, designed for applications where leveling and defoaming are both important, such as coil and can coatings. It can also be used in other foam-sensitive systems.

AFCONA 4000 is a high molecular weight polymeric dispersant for deflocculation of all type of pigments. It is a result of an innovative concept of polyurethane dispersants. This innovative technology is based on an own new developed intermediate monomer and own new developed anchoring groups.

Dar-Tech Hauthane L-3786 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high-performance concrete and wood floor coatings. L-3786 employs a unique air-dry, self-crosslinking mechanism to impart chemical resistance, abrasion resistance, and mar resistance properties that equal or exceed those of two-component, water-based floor coating systems currently used in the market.

AFCONA 6782 is a conductive agent that can increase the conductivity of coating systems and is extremely important for electrostatic spraying. It is suitable for both non-polar and polar systems. For best results when using AFCONA 6782 in a colorant paint with only white spirit solvent, it should be incorporated with sec-butanol in a ratio of 1:1 or 1:2.

ACCESS® SFR OH 70 is an intumescent coating solution specifically designed to provide superior fire protection for a wide range of structural steel applications. Its advanced formula is designed to expand and form a thick, insulating char layer that helps to prevent steel from reaching critical temperatures during a fire, providing excellent protection for both people and property.

TYTAN™ S2 is a titanium ethylacetoacetate commonly used as an important additive in moisture-curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross-linking, and as a moisture scavenger for sealant. TYTAN™ S2 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.

Mistron® FC 002 is a functional additive with high purity that is particularly suitable for adhesives, caulks, mastics, and sealants. This additive enhances the mechanical properties of these products and imparts hydrophobicity and barrier properties, thereby improving their corrosion resistance. Comprised primarily of talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite, the product is odorless and has a white or off-white to light gray color.

Access Rudolf Organosilane G 302 - Ethoxy is an innovative silane coupling agent that improves the adhesion and crosslinking of various coatings and adhesives. This multifunctional product is specifically designed to enhance the durability and performance of the final product, making it an ideal choice for many industries, including automotive, aerospace, and construction. With its unique ethoxy functionality, Access Rudolf Organosilane G 302 - Ethoxy offers superior performance compared to other silane coupling agents.

Mistron® CF5A-M is a high-purity engineered talc that has a very low viscosity build, allowing it to be formulated at high loading in low-VOC industrial coatings while maintaining excellent anti-settling properties and superior corrosion resistance. This product is composed of more than 98% talc.

Silverline 002E is a high-purity functional mineral additive that is ideal for putties and liquid compounds. It improves dimensional stability and reinforces these substances, providing added protection against cracking and shrinking. Due to its shear-thinning rheology, talc is the industry standard for sanding and polishing properties, and it is used in various industries such as paper, paints, ceramics, plastics, and more.

AFCONA 3580 is a silicone-based leveling and anti-crater agent for aqueous coatings that does not influence intercoat adhesion. AFCONA 3580 is an organically modified polysiloxane with very short chain repeatable units of siloxane. These small molecules allow it to move very quickly to an area of defects. This offers very good anti-crater properties without causing intercoat adhesion problems.

ACCESS® SFR 6,000 OH offer excellent thermal stability, low volatility, and a wide range of compatibility with other materials. These fluids can be used as base polymers or blend polymers to create materials with a range of hardness, and can be cured with silicon-hydride crosslinkers and a platinum catalyst. The hydroxyl-termination allows for further functionalization of the material, making it versatile and adaptable for a variety of applications

Mistron® Superfrost is a high-purity, functional additive ideal for adhesives, caulks, mastics, and sealants. It provides reinforcement for improved mechanical properties and imparts hydrophobicity and barrier properties for improved corrosion resistance. It is mainly composed of talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite. The product is odorless and has a white or off-white to light gray color.

Access Rudolf Organosilane AE301T is a water-repellent agent that is specifically designed for use on textiles and other porous materials. This product provides excellent water repellency and has been formulated to have minimal impact on the appearance and feel of the treated materials. It is easy to apply and provides long-lasting protection against water damage.

DeCAL 2097 is an extremely high efficiency anionic superplasticiser based on polycarboxylate technology. DeCAL 2097 has applications in mortars, concretes, self-levelling systems, adhesives and grouts. DeCAL 2097 has a very high deflocculation effect which allows it to maintain the dispersed state for longer periods as compared to conventional plasticisers.

DeCAL 2033 a novel multifunctional acrylic dispersing agent based on new technology - the grade is an ideal problem solving dispersant and is compatible with a wide range of organic and inorganic fillers and pigments utilized in water borne systems. It is a pale brown liquid. DeCAL 2033 can aid stability and prevent the precipitation of a wide variety of mineral salts, including calcium, magnesium, iron, aluminum, zinc, barium and chromium.