Knowde Enhanced TDS
Identification & Functionality
- Fluids & Lubricants Functions
- Technologies
Features & Benefits
- Fluids & Lubricants Features
- Product Highlights
- HX-1 certified by NSF International for food-grade lubricants.
- Certified for Ecolabel ready and registered on the LuSC list Suitable for stable suspensions in solvents, mineral oils, greases and pastes.
- Replacement for chlorinated paraffins and use as an extender for MoS2.
- Desilube Green Products Overview
The patented technology allows products to be environmentally safer than traditional lubricants. These products perform better than conventional lubricant additives in many applications. Thus, decreasing costs while providing a safer environment. Included are non-toxic, high performance additives for extreme pressure applications, food-grade additives, products for use under high temperature conditions, substitutes for commonly used MoS2 and chlorinated hydrocarbons.
Key Points:
- Excellent extreme pressure/antiwear properties
- Environmentally friendly
- Food grade HX-1 approved
- Colorless
- Odorless
- Water soluble
Applications & Uses
- Applications
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Use Level
- 1 - 15 % by weight
- Applications
- EP/AW additive for metalworking compounds, grease and gear oils
- Chlorinated paraffin replacement
Properties
- Appearance
- White free flowing powder (at 25°C)
- Partially Soluble in
- Water
- Physico-Chemical Properties
| Value | Units | Test Method / Conditions | |
| Density | 2.01 | g/cc | — |
| Particle Size | 3 - 12 | µm | — |
| Melting Point | min. 200 | °C | — |
| pH (at 8% in Water) | 7.6 - 8.5 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Desilube 88 Performance Summary
Performance in Water
Mass Percent Desilube 88 2 Polypropelene glycol 12 Fatty acid 3 Amino alcohol 5 Water balance Dilution 1:20 (Desilube 88 = 0.1%, pH: 7-8) Results Falex EP, lb ASTM D3233 (steel pin and AISI 1137 V block) 3750 Wear (15min at 1000lbs) Pin weight loss, mg 3.1
Performance in Li grease Comparison to MoS2Mass Percent Food Grade Li grease 100 95 95 90 AlX grease 100 95 White mineral oil (150SUS) 100 95 MoS2 5 Desilube 88 5 10 5 5 Results Food Grade 4 ball weld, kgf ASTM D2596 160 250 400 620 120 500 100 500 LWI (Load Wear Index) 18 31 44 75 - 51 - 54 Wear scar diameter, mm ASTM D2266 0.80 0.65 0.45 0.39 0.77 0.55 0.90 0.53 Timken OK load, lbs ASTM D2782 - - - 65 - 45 - -
Packaging & Availability
- Packaging Type
- Packaging Information
91kg/200lb, 55 gal fiberpak drums