Knowde Enhanced TDS
Identification & Functionality
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Use Level
- 0.5 - 3.0% (In water, depending on contact time, temperature, equipment and soil)
- Directions for Use
- General: This product is designed for use at 0.5 - 3% solution strength depending on the equipment and soil
- Heavy Soil Conditions: in a HTST, Evaporator, Oven or Fryer, cleaning will be performed at 1 - 3% solution at 145 - 185°F (63 - 85°C) for 30 - 60 minutes.
- Deep Fat Fryer Cleaning: Drain fryer. Rinse fryer with hot water. Fill fryer to within 3 - 4 in (7.6 - 10.2 cm) with cool water. Add 6 oz. (118 ml) product per 4 gal. (15.1 L) of water. Boil slowly for 20 minutes
- Scrub inside of boiler with long handled brush if necessary
- Drain fryer
- Rinse with clean water
- Allow to air dry.
Properties
- Appearance
- White powder
- Odor
- Mild to none
- Typical Physical Properties
Value | Units | Test Method / Conditions | |
Loose Powder Density | 8.8 | pounds/gallon | — |
pH (1% Solution) | min. 13 | — | — |
Regulatory & Compliance
- Regulatory Information
- Caustic HT does not contain any nonylphenol ethoxylates (NPEs). It is better for the environment and is subject to fewer regulatory restrictions than similar NPE-containing products. Caustic HT will work in hard or soft water.
- This product does not contain any phosphates.
Packaging & Availability
- Available Packaging Sizes
- 400 lb drum
- 8 lb jar