DynaPhite™ 0-28-26

1 of 3 products in this brand
DynaPhite 0-28-26 is a Foliar Nutrient formulated to treat Phosphate and Potash deficiencies in a wide variety of crops.

Functions: Fertilizer, Micronutrient

Chemical Family: Phosphorous-based Compounds, Potassium Salts

Application Technique: Aerial Application, Chemigation, Ground Soil Applied, Sprinklers

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Agrochemical Functions
Technologies
Composition

GUARANTEED ANALYSIS

Available Phosphoric Acid (P2O5) (AOAC method 960.02) - 28.0%

Soluble Potash (K2O) - 26.0%

Features & Benefits

General Information

Nutrient deficiencies of available phosphate and soluble potash in Permanent­ Crops, Vegetable Crops, and Field Crops, as well as Golf Courses(1), Turfgrass (Warm and Cool Season)(1), Commercial Greenhouse and Landscape (including lawn care and Sod farms), Ornamental and Nursery Crops, and Perennials and Annuals can be effectively treated with DynaPhite Foliar Phosphite Nutrient 0-28-26. As both a foliar and soil-applied plant food, conventional sprayers, ground or aerial application equipment may be utilized to deliver DynaPhite Foliar Phosphite Nutrient 0-28-26.

From pre-bloom to post-transplant, root development, budding and flowering, to maintaining plant vigor, DynaPhite Foliar Phosphite Nutrient­ 0-28-26 supplies the plant’s phosphate and potash needs for effective beneficial growth.

Phosphorous acid products are for use as a supplemental fertilizer treatment. Upon foliar application, the phosphite ions are taken up directly by the plant foliage and may undergo a degree of conversion to phosphate ions, or will be used directly by plants, as phosphite ions. As a soil application to annual crops, a lesser response from the initial crop, with a corresponding superior response from succeeding crops, may be observed. In addition, placement close to seeds or root zones may be injurious to crops. The effect may be aggravated by a soil pH below 6.5.

Foliar fertilization is intended as a supplement to a regular fertiliza-tion program and may not, by itself, provide all the nutrients normally required by crops or other intended plants.

Applications & Uses

Mixing Instructions

Fill the clean spray or mix tank half-way with water, begin agitation, add other fertilizers and/or pesticides in the following sequence (unless otherwise directed by their labeling):

  1. Dry flowables or water dispersible granules
  2. Wettable powders
  3. Flowables
  4. Emulsifiable concentrates
  5. Water-based solutions
  6. Compatibility agents
  7. Other Fertilizers and/or Pesticides
Direction For Use

Foliar applications always require sufficient water for thorough coverage of the plant’s foliage.Maximum spray volume solution is 2%. A 0.5% v/v solution is equal to 6.4 fluid ounces of this product per 10 gallons of water.Application via aerial, ground or conventional sprayers at 10 to 500 gallons of water per acre is recommended.For each 1,000 square feet of coverage area, use 8 fluid ounces of this product per 6.25 gallons of water.Follow the suggested rates below for aerial, ground and irrigation ­application methods or as otherwise directed.

Properties

Formulation Type

Safety & Health

Precautionary Statements

WARNING: Causes skin and eye irritation. Harmful if swallowed. Do not get on skin, in eyes or on clothing. Take off contaminated clothing and wash before reuse. If swallowed, call poison center, doctor/physician if you feel unwell. Do not eat, drink, or smoke when using this product. Avoid breathing spray mist. Wash thoroughly with soap and water after handling and before eating, chewing gum, using tobacco or using the toilet. Do not apply this product in such a manner as to directly expose workers or other persons. If product is being mixed with pesticides and/or compatibility agents, follow the FIRST AID and Precautionary Statements on the product’s labeling.

PERSONAL PROTECTION EQUIPMENT (PPE):

Wear eye and face protection, protective gloves, clothing, shoes and socks.

Precautions & Recommendations
  • Adding adjuvants or surfactants to this product is not recommended.
  • If the spray solution is below 6 pH, do not mix with copper-based fungicides or fixed copper.
  • Foliar injury, foliar burning, root injury, phytotoxicity, pH changes in your planting medium, injector system damage and irrigation system damage can be prevented by adhering to all precautions and exercising sound conventional cultural practices when using this highly concentrated product.
  • Combinations of this product with any other product should be tested for compatibility prior to any spray mix application. A phytotoxicity trial is recommended, especially if you do not have experience with the combination.
  • Contact your local agricultural extension agent, a certified crop application­ advisor, or authorized Drexel representative for more information.

Packaging & Availability

Packaging Type

Storage & Handling

Storage And Disposal

STORAGE: Do not store at temperatures below 32°F and protect from frost. Keep out of reach of children and animals in a cool, dry chemical storage area. Keep container tightly closed. Do not allow water to be introduced into the container contents.

DISPOSAL: Dispose of empty containers by triple rinsing with detergent solution or puncture and discard empty containers in a landfill in accordance with current Local, State and Federal regulations. Do not contaminate water sources by cleaning of equipment or disposal of waste.