Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
- Composition
PRINCIPAL FUNCTIONING AGENT:
Concentrated blend of foaming agents - 100.0%
Applications & Uses
- Markets
- Application Technique
- Use Information
F.M.-160 is a foaming agent designed for use in foam generating equipment. This product is temperature stable. When dispensed, this product produces a dense, readily visible, white foam of sufficient longevity under normal conditions for many applications.Using this product in field marking systems helps eliminate costly spray gaps and harmful overlaps that can occur during the application of pesticides and fertilizers.
- Mixing Instructions
Fill foam generator one-fourth full with water and add the required amount of this product. Add enough water to fill foam generator to one-half full. Do not fi ll above one-half full as this may impair the operation of the foam generator.
The ideal foam consists of small tight cells and is not so dry as to blow away or so wet that it has no body. Reduce air pressure if foam is wet and is coming out as a creamy liquid. Use less of this product per unit volume of water or increase air pressure if foam is too dry. Foam droppings of 3 to 5 inches in diameter are recommended for better visibility and longer stability.
- Direction For Use
To produce a good quality foam, be certain to fl ush and clean the foam generating equipment thoroughly before each use.Apply this product at a rate of 1 gallon per 160 gallons of water. This dilution rate will produce an adequate amount of foam from most types of foam generating equipment. The best dilution rate depends on water hardness, equipment, and required foam persistence.Note: Foam life will vary with water hardness, humidity, temperature, and soil moisture content.
Properties
- Formulation Type
Safety & Health
- Precautionary Statements
Hazards To Humans And Domestic AnimalsWARNING: Causes serious eye irritation. Causes skin irritation. Harmful if swallowed or if in contact with skin. Do not get on skin, in eyes or on clothing. Do not eat, drink or smoke when using this product. Avoid breathing spray mist. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Take off contaminated clothing and wash before reuse. Avoid release to the environment.PERSONAL PROTECTIVE EQUIPMENT (PPE)Wear eye protection, face protection, protective gloves and protective clothing.
- Environmental Hazards
Do not contaminate water sources by cleaning of equipment or disposal of washwater.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage And Disposal
Do not contaminate water, food or feed by storage or disposal.
PRODUCT STORAGE: Protect from freezing. If stored in cold or freezing weather, this product may separate or thicken. This will not harm the performance. Before using, allow to warm to room temperature and stir thoroughly. Store in original container. Keep container tightly sealed. Do not allow chemicals or water to be introduced into the contents of this container. Do not store near heat or open flame. Do not store with oxidizing agents or ammonium sulfate.
PRODUCT DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.
CONTAINER DISPOSAL: Do not reuse empty container. Triple rinse (or equivalent) during mixing and loading. Recycling decontaminated containers is the best option of container disposal. The Agricultural Container Recycling Council (ACRC) operates the national recycling program. To contact your state and local ACRC recycler visit the ACRC web page at www.acrecycle.org. Decontaminated containers may also be disposed of in a sanitary landfill.