Search:
148 products found on BETASEAL Adhesives
Betaseal® 16100h product card banner

DuPont

BETASEAL® 16100H

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Primers & Sealers

Chemical Family: Silanes

BETASEAL® 16100H is a solvent-based silane blend type primer. BETASEAL® 16100H is a clear, one-step primer used to promote adhesion to glass and used in conjunction with an approved polyurethane adhesive

Betaseal® Xpress 30 product card banner

DuPont

BETASEAL® Xpress 30

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® Xpress30 is a single component, high modulus non-conductive adhesive with Reinforced Polyisotropic Micro-network (RPM) technology for high initial green strength that enables rapid crosslinking to speed bonding, allowing faster minimum drive-away times. BETASEAL® Xpress30 is a cold applied, high modulus and non-conductive (enhances vehicle's structural integrity / passenger comfort with reduced road noise, while reducing GPS / phone / HUD / defroster connection interference). BETASEAL® Xpress30 has industry-leading ease of use application, tooling, decking performance, short cut-off string, crash proven 30 minute minimum drive-away time down to 0°F.

Betaseal® 1766 Eu product card banner

DuPont

BETASEAL® 1766 EU

Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1766 EU is a high viscosity, high modulus, glass bonding adhesive that can be used primerless to paint and glass. Due to its chemistry, it delivers a high initial handling strength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.

Betaseal® 8000-1f product card banner

DuPont

BETASEAL® 8000-1F

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 8000-1F is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F _x005F BETASEAL® 8000-1F is a cold processable, medium viscosity, low modulus adhesive with excellent UV stability attributes. It is primerless to paint on automotive paints.

Betaseal® 15700 product card banner

DuPont

BETASEAL® 15700

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 15700 is a primerless to paint, one-component urethane adhesive.

Betaseal® 15709 product card banner

DuPont

BETASEAL® 15709

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 15709 is a primerless to paint, one-component urethane adhesive.

Betaseal® 1758-1f product card banner

DuPont

BETASEAL® 1758-1F

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1758-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F BETASEAL® 1758-1F is a warm and cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint. Warm application of BETASEAL® 1758-1F delivers a medium initial handling strength to hold the position of the bonded parts.

Betaseal® 1815-1f product card banner

DuPont

BETASEAL® 1815-1F

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1815-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 1815-1F is a warm and cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint. Warm application of BETASEAL® 1815-1F delivers a medium initial handling strength to hold the position of the bonded parts.

Betaseal® 1001 Em product card banner

DuPont

BETASEAL® 1001 EM

Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1001 EM is a medium viscosity, high modulus, non conductive, fast curing glass bonding adhesive which requires a primer during the process. It is a one component, ambient moisture curing adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension. BETASEAL® 1001 EM has a 3 hour Safe-Drive-Away-Time, crash tested to FMVSS 212 specification with twin airbags.

Betaseal® 43555 product card banner

DuPont

BETASEAL® 43555

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Primers & Sealers, Structural Adhesives

BETASEAL® 43555 is a PVC primer designed to promote adhesion between BETASEAL® adhesives and PVC substrates.

Betaseal® 15506kn product card banner

DuPont

BETASEAL® 15506KN

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 15506KN is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 15506KN is a cold processable, high viscosity, medium modulus, fast-curing glass bonding adhesive that can be used primerless on paint.

Betaseal® 8000 product card banner

DuPont

BETASEAL® 8000

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® 8000 by DuPont is commonly used as Bonding Adhesive and Glass Bonding Adhesive for a variety of applications in Automotive.

Betaseal® 57302kn product card banner

DuPont

BETASEAL® 57302KN

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® 57302KN is a one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® 16100a product card banner

DuPont

BETASEAL® 16100A

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Primers & Sealers

Chemical Family: Polyurethanes (PU)

BETASEAL® 16100A is a solvent-based silane blend type primer. BETASEAL® 16100A is clear, one-step primer used to promote adhesion to glass and used in conjunction with an approved polyurethane adhesive

Betaseal® X2500 Plus (A+b) product card banner

DuPont

BETASEAL® X2500 PLUS (A+B)

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® X2500 PLUS (A+B) is a two-component polyurethane adhesive for glass and structural bonding applications. It has high viscosity and cures almost independently of moisture.

Betaseal® 1580 product card banner

DuPont

BETASEAL® 1580

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1580 is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 1580 is a cold processable, medium viscous, non-conductive, high modulus, fast-curing glass bonding adhesive which requires a paint primer during the process.

Betaseal® 1965-1f product card banner

DuPont

BETASEAL® 1965-1F

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1965-1F is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F BETASEAL® 1965-1F is a cold processable, high viscosity, high modulus adhesive with fast-curing attribute. It has broad coverage of difficult automotive paints and can be used also for add-on, parts bonding at glass tiers.

Betaseal® 1949-1f product card banner

DuPont

BETASEAL® 1949-1F

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1949-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F _x005F BETASEAL® 1949-1F is a cold processable, high viscosity, high modulus, non-conductive glass bonding adhesive that can be used primerless on paint and glass. It should be combined with a clear activator developed for uniwipe adhesives (BETAWIPE® 6600T or BETAWIPE® Hydro 2) on ceramic coated glass.

Betaseal® 57302n product card banner

DuPont

BETASEAL® 57302N

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® 57302N is a one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® 16605 product card banner

DuPont

BETASEAL® 16605

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® 16605 is a primerless to paint, one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application. BETASEAL® 16605 can be used with BETASEAL® 16100A. The system is It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® 16005n product card banner

DuPont

BETASEAL® 16005N

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® 16005N is a primerless to paint, one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application. BETASEAL® 16005N can be used with BETASEAL® 16100A. The system is It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® 900ei product card banner

DuPont

BETASEAL® 900EI

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 900EI is a one-component, moisture-curing, non-conductive polyurethane-based adhesive developed especially for battery pack assembly and sealing. BETASEAL® 900EI has low VOC, durable adhesion to e-coated aluminum or steel, good gap bridging capability and is fast-curing. BETASEAL® 900EI has an optimized modulus and high electrical resistance. It is formulated to withstand pressure. BETASEAL® 900EI exhibits excellent sealing against environmental factors and is field serviceable.

Betaseal® 43532 product card banner

DuPont

BETASEAL® 43532

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Primers & Sealers

Chemical Family: Polyurethanes (PU)

BETASEAL® 43532 is a polyurethane-based, methylene chloride-free, solvent evaporation, and moisture cure type primer. After application to a substrate, this primer has a tendency to drip less than standard primers. BETASEAL® 43532 is a It is a blackout body primer that promotes adhesion between polyurethane adhesive and vehicle body.

Betaseal® 43520a product card banner

DuPont

BETASEAL® 43520A

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Primers & Sealers

Chemical Family: Polyurethanes (PU)

BETASEAL® 43520A is a polyurethane-based solvent release type primer. It is a blackout glass primer suitable for use to screen out ultraviolet rays and to promote adhesion between polyurethane adhesive and glass.

Betaseal® 16501 product card banner

DuPont

BETASEAL® 16501

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® 16501 is a primerless to paint, one-component, fast-curing, high viscosity adhesive excellent for bonding stationary glass, painted metals and durable enviromental sealing. BETASEAL® 16501 is compatible with DuPont BETASEAL® 16100A uniwipe clear one-step glass primer. BETASEAL® 16501 can be used for primerless adhesion to clearcoat paint systems.

Betaseal® 1590 Ct product card banner

DuPont

BETASEAL® 1590 CT

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1590 CT is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 1590 CT is a cold processable, medium viscous, non-conductive, high modulus and long assembly time glass bonding adhesive which requires a paint primer during the process.

Betaseal® 43533atu product card banner

DuPont

BETASEAL® 43533ATU

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Primers & Sealers

Chemical Family: Polyurethanes (PU)

BETASEAL® 43533ATU is a polyurethane-based, solvent release type primer that promotes adhesion between BETASEAL® urethane adhesives and various automotive topcoats. It is a It is a blackout body primer that promotes adhesion between polyurethane adhesive and vehicle body.

Betaseal® 58702sfln product card banner

DuPont

BETASEAL® 58702SFLN

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® 58702SFLN is a one-component, fast-curing, low viscosity adhesive that is solvent-free suitable for stationary glass bonding and is primerless to most glass substrates. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® U838 product card banner

DuPont

BETASEAL® U838

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® U838 is a one-component, conventional cure adhesive._x005F BETASEAL® U838 eliminates steps and speeds installations by incorporating glass primer into the urethane._x005F BETASEAL® U838 can be used for structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass. Other uses include attaching hardware to glass and backfilling to reinstall reveal moldings or other trim.

Betaseal® 1989 Us product card banner

DuPont

BETASEAL® 1989 US

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® 1989 US is a high modulus, primerless to paint, one-component, fast-curing, and high viscosity urethane adhesive._x005F BETASEAL® 1989 US is suitable for stationary glass bonding when used with the appropriate primers. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® 1754lv product card banner

DuPont

BETASEAL® 1754LV

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1754LV is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F BETASEAL® 1754LV is a cold processable, medium viscosity, low modulus adhesive with excellent UV stability attributes. It is primerless to paint on automotive paints.

Betaseal® Hv3 Paas product card banner

DuPont

BETASEAL® HV3 PAAS

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® HV3 PAAS is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® HV3 PAAS is a cold processable, high viscosity, low modulus adhesive used for mainly lip applications (PAAS) on glasses instead of PU encapsulation. If BETASEAL® HV3 PAAS is used for glass bonding, a paint primer is required during the process.

Betaseal® U-400hv product card banner

DuPont

BETASEAL® U-400HV

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® U-400HV is a one-component, conventional-cure adhesive._x005F BETASEAL® U-400HV is designed for structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass. Other uses include attaching hardware to glass and backfilling to install reveal moldings or other trim.

Betaseal® 15425n product card banner

DuPont

BETASEAL® 15425N

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Structural Adhesives

BETASEAL® 15425N is a one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® 1989 product card banner

DuPont

BETASEAL® 1989

BETASEAL® 1989 is a warm processable, high viscosity, high modulus, low conductive glass bonding adhesive can be used primerless on paint and glass._x005F _x005F It should be combined with a clear activator developed for Uniwipe Adhesives (BETAWIPE® 6600T or BETAWIPE® Hydro 2) on ceramic coated glass. It is a one component, moisture curing, solvent free adhesive with excellent sag and bead stability based on polyurethane chemistry. The BETASEAL® 1989 adhesive cures with environmental moisture and skin formation and curing is dependent on humidity, temperature and application dimensions._x005F _x005F All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.

Betaseal® 1125-1f product card banner

DuPont

BETASEAL® 1125-1F

BETASEAL® 1125-1F is a High viscosity, Medium modulus, Non-conductive glass and trim bonding adhesive which can be used primerless on paint for selected paint technologies. It has excellent UV stability and can be used for gap filling applications on commercial vehicals. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.