DuPont Hytrel® TPC-ET thermoplastic elastomer combines the flexibility of rubber with the strength and processability of thermoplastics. Manufacturers prefer parts made with Hytrel® for their resilience, heat and chemical resistance, as well as their strength and durability.
Browse Products by Market (10)
Browse Products by Technology (6)
Featured Products
Products (557)
Zytel
Zytel® HTN52G35EF BK420
Chemical Family: Polyamides
Zytel® HTN high performance polyamide resins feature high retention of properties upon exposure to elevated temperature, to high moisture, and to harsh chemical environments. Polymer families and grades of Zytel® HTN are tailored to optimize performance as well as processability. Typical applications with Zytel® HTN include demanding applications in the automotive, electrical and electronics, domestic appliances, and construction industries. Zytel® HTN52G35EF BK420 is a 35% glass reinforced, heat stabilised, lubricated high performance polyamide resin that can be moulded in water heated molds, developed for electrical and electronics applications. It is also a PPA resin.
Zytel
Zytel® 70G50HSL NC010
Chemical Family: Polyamides
Polymer Name: Polyamide 66 (PA 66)
Zytel® 70G50HSL NC010 is a 50% Glass Reinforced, Heat Stabilized, Polyamide 66 Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Rynite
Rynite® RE19051 BK507
Chemical Family: Polyesters
Polymer Name: Thermoplastic Polyester
Rynite® RE19051 BK507 by DuPont is comprised of Thermoplastic Polyester. It is commonly used as Molding Resin for a variety of applications. Rynite® RE19051 BK507 is certified as UL Flame Rated. It is available in Pellets form.
Rynite
Rynite® 408 NC010
Chemical Family: Polyesters
Polymer Name: Thermoplastic Polyester
Rynite® 408 NC010 by DuPont is comprised of Thermoplastic Polyester. It is commonly used as Molding Resin for a variety of applications in Automotive. Rynite® 408 NC010 is certified as UL Flame Rated. It is available in Pellets form.
Rynite
Rynite® 408 BK515
Chemical Family: Polyesters
Polymer Name: Thermoplastic Polyester
Rynite® 408 BK515 by DuPont is comprised of Thermoplastic Polyester. It is commonly used as Molding Resin for a variety of applications in Automotive. Rynite® 408 BK515 is certified as UL Flame Rated. It is available in Pellets form.
Brands (6)
Products
83
Delrin®
Polymer Name: Polyacetal Homopolymer (POM)
Leading companies across the globe specify Delrin® acetal resin from Dupont for high-load mechanical applications, including gears, safety restraints, door systems, conveyor belts, healthcare delivery devices, and other demanding products and parts. Delrin® acetal (Polyoxymethylene POM) is an ideal ingredient in parts designed to replace metal. It combines low-friction and high-wear resistance with the stiffness and strength such applications require. It provides a wide operating temperature range (-40° C to 120° C) and exceptional colorability. It also mates well with metal and other polymers, and it offers dimensional stability in precision molding. Compared to acetal copolymer, Delrin® acetal homopolymer offers higher tensile strength, stiffness, creep and fatigue resistance, and significantly higher impact resistance. The combination of these excellent mechanical properties in a single material allows for thinner, lighter-weight parts, shorter molding cycles, and potential cost savings thanks to its higher impact resistance. Authentic Delrin® acetal resin is available exclusively from DuPont distributors, in stock shapes (sheets, rods, tubes).
Products
153
Zytel®
Chemical Family: Polyamides
Polymer Name: Polyamide 610 (PA 610), Polyamide 6 (PA 6), Polyamide 6/66 (PA 6/66)
For manufacturers across a number of industries, Zytel® HTN high-performance polyamide resin is the choice for reducing weight, improving strength, enhancing durability, increasing thermal performance, and simplifying processing. The Zytel® family of products is available in a variety of grades that sustain high strength and stiffness over a wide range of temperatures, chemicals, and moisture exposure. Zytel® HTN is widely used to replace metal parts that must withstand high temperature tolerances (such as engine cooling, handheld devices, and non-halogenated connectors), while reducing cost and weight. In both PPA grades and structural grades, Zytel® HTN solutions enhance performance in a diverse array of applications.
Products
46
Zytel® HTN
Chemical Family: Polyamides
Polymer Name: Polyamide 6T/XT (PA 6T/XT), Polyamide 6T/66 (PA 6T/66), Polyamide 6T (PA 6T)
For manufacturers across a number of industries, Zytel® HTN high-performance polyamide resin is the choice for reducing weight, improving strength, enhancing durability, increasing thermal performance, and simplifying processing. The Zytel® family of products is available in a variety of grades that sustain high strength and stiffness over a wide range of temperatures, chemicals, and moisture exposure. Zytel® HTN is widely used to replace metal parts that must withstand high temperature tolerances (such as engine cooling, handheld devices, and non-halogenated connectors), while reducing cost and weight. In both PPA grades and structural grades, Zytel® HTN solutions enhance performance in a diverse array of applications.
Products
44
Rynite®
Chemical Family: Polyethylene Terephthalate (PET), Polyesters
Polymer Name: Polybutylene Terephthalate (PBT), Polyethylene Terephthalate (PET), Thermoplastic Polyester
Rynite® unites the best properties of reinforced polyethylene terephthalate (PET) with easier processability to produce high-performance parts. With its lightweight, glass-reinforced composition, dimensional stability, durability, and high-gloss finish, Rynite® is preferred across a wide range of applications, particularly as a replacement of die-cast metals and thermosets. This stiff, UV resistant polymer offers a balance of thermal, mechanical, and chemical properties that make it ideal for electrical and electronic parts. Rynite® offers superior flow characteristics as well, which means it fills complex, thin-walled molds with less injection pressure than is needed with other resins a big advantage in the miniaturization of parts. Rynite® polyethylene terephthalate (PET) helps make electrical devices, photovoltaic panels, switches, and other critical energy components stronger and reliable. It's one big reason why DuPont offers the industry's largest portfolio of pre-approved Underwriters Laboratories (UL) electrical insulation systems (EIS) and recognized to IEC standards products.
Products
205
MOLYKOTE® Speciality Lubricants
Chemical Family: Calcium Salts, Polyolefins, Silicas & Silicates
MOLYKOTE® Specialty Lubricants are trusted by engineers, OEMs and product designers worldwide for their ability to meet tough lubrication challenges. From saving energy by reducing friction and wear to improving safety and comfort by reducing NVH, MOLYKOTE® is Smart Lubrication.
Documents (1,431)
