Company logo

products

DuPont
Search:
Automotive
806 products found on DuPont DuPont products found for View all Automotive on Knowde
Applications
Other Automotive Applications
Fuel Systems
Electrical & Electronic Systems
Interior
Powertrain & UTH
Cooling & Climate
Chassis & Brake
Exterior & Body
Safety Systems
Seating
Aftermarket Parts & Components
Automotive Lighting
With TDS
With SDS
Delrin® 150 Nc010 product card banner

DuPont

Delrin® 150 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 150 NC010 is a high viscosity acetal homopolymer specifically designed for extrusion processes. It has excellent thermal stability, low die deposit, and enhanced crystallization for low porosity.

Delrin® 500p Nc010 product card banner

DuPont

Delrin® 500P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, a good combination of mechanical properties, and low VOC emissions.

Zytel® 101l Nc010 product card banner

DuPont

Zytel® 101L NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Zytel® 101L NC010 is a lubricated polyamide 66 resin for injection molding.

Kalrez® Spectrum™ 6375 product card banner

DuPont

Kalrez® Spectrum™ 6375

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: High Temperature Resistance, Good Thermal Stability, Chemical Resistant

End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools, Semiconductor Applications, Ball Valves, Measurement While Drilling Tools, Valves, Electric Submersible Pump

Color: Black

Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.

Delrin® Fg500sc Nc010 product card banner

DuPont

Delrin® FG500SC NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® FG500SC is a masterbatch of 20% silicone fluid in Delrin@ FG500P. It is designed for cube-blending with any grade of Delrin@ for applications requiring low wear and friction against itself and other plastics. It has been developed for applications in contact with food.

Delrin® 100 Nc010 product card banner

DuPont

Delrin® 100 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

Zytel® 101 Nc010 product card banner

DuPont

Zytel® 101 NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding, Extrusion

Flexural Modulus: 2800.0 - 2800.0 MPa

Zytel® 101 NC010 is a general purpose polyamide 66 resin for injection molding and extrusion.

Delrin® 100af product card banner

DuPont

Delrin® 100AF

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Fillers Included: PTFE, PTFE Fiber

Additives Included: Lubricant (Unspecified), Mold Release Agent

Flexural Modulus: 2500.0 - 2500.0 MPa

Delrin® 100AF is a high viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.

Kalrez® Spectrum™ 7075 product card banner

DuPont

Kalrez® Spectrum™ 7075

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: Good Seal Force Retention, High Temperature Resistance, Low Compression Set, Good Thermal Stability, Chemical Resistant

End Uses: Flanges, Semiconductor Applications, Pump Parts, Hot Glue Delivery Nozzle, Valves, Valve Parts

Color: Black

Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.

Delrin® 100p Nc010 product card banner

DuPont

Delrin® 100P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.

Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Betaseal® 16100h product card banner

DuPont

BETASEAL® 16100H

Ready to Use Product Type: Primer, 1K (1 component) Coating, Solventborne Coating

Compatible Substrates & Surfaces: Glass

Chemical Family: Silanes

Features: Improved Adhesion

BETASEAL® 16100H is a solvent-based silane blend type primer. BETASEAL® 16100H is a clear, one-step primer used to promote adhesion to glass and used in conjunction with an approved polyurethane adhesive

Delrin® 570 Nc000 product card banner

DuPont

Delrin® 570 NC000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 4600.0 - 4600.0 MPa

Delrin® 570 is a medium viscosity acetal homopolymer containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature.

Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Zytel® 70g33l Nc010 product card banner

DuPont

Zytel® 70G33L NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 9000.0 - 9000.0 MPa

Zytel® 70G33L NC010 is a 33% glass fiber reinforced polyamide 66 resin for injection molding.

Delrin® 500cl Nc010 product card banner

DuPont

Delrin® 500CL NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 500CL is a medium viscosity acetal homopolymer containing a chemical lubricant, designed for low wear and friction against metals.

Multiflex® G 60 A 11 Bt 13893 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 60 A 11 BT 13893 Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion, Film Extrusion

Tear Strength: 23.0 - 23.0 kN/m

Strain at Break: 650.0 - 650.0 %

Multiflex® Automotive GT Range can be transformed between 190°C to 230°C. In this temperature range, materials are stable, above, thermal degradation occurs, resulting in yellowing and significant odor emanation. Multiflex® G 60 A 11 BT 13893 is designed for use in injection molding/extrusion

Hytrel® 5556 product card banner

DuPont

Hytrel® 5556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.

Hytrel® 4556 product card banner

DuPont

Hytrel® 4556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Betaseal® Xpress 30 product card banner

DuPont

BETASEAL® Xpress 30

Ready to Use Product Type: Structural Adhesive & Sealant, 1K (1 component) Adhesive & Sealant

BETASEAL® Xpress30 is a single component, high modulus non-conductive adhesive with Reinforced Polyisotropic Micro-network (RPM) technology for high initial green strength that enables rapid crosslinking to speed bonding, allowing faster minimum drive-away times. BETASEAL® Xpress30 is a cold applied, high modulus and non-conductive (enhances vehicle's structural integrity / passenger comfort with reduced road noise, while reducing GPS / phone / HUD / defroster connection interference). BETASEAL® Xpress30 has industry-leading ease of use application, tooling, decking performance, short cut-off string, crash proven 30 minute minimum drive-away time down to 0°F.

Betatech™ 2029 product card banner

DuPont

BETATECH™ 2029

Ready to Use Product Type: 2K (2 component) Adhesive & Sealant, Conductive Adhesive

Chemical Family: Polyurethanes (PU)

BETATECH™ 2029 is a two component thermal interface material based on a polyurethane technology with a very high thermal conductivity. BETATECH™ 2029 is based on aluminum trihydroxide fillers that lead to a very high thermal conductivity accompanied by a low density. The material can be efficiently applied and the parts can be joined quickly due to a low press-in force. The material is free of silicones.

Delrin® 500af product card banner

DuPont

Delrin® 500AF

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Injection Molding

Fillers Included: PTFE, PTFE Fiber

Additives Included: Lubricant (Unspecified), Mold Release Agent

Flexural Modulus: 2500.0 - 2500.0 MPa

Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.

Delrin® Sc698 Nc010 product card banner

DuPont

Delrin® SC698 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 3000.0 - 3000.0 MPa

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® SC698 NC010 is a lubricated low viscosity acetal homopolymer, developed for high precision thin-walled parts requiring low wear and low friction with excellent surface aspect.

Zytel® Fr50 Nc010 product card banner

DuPont

Zytel® FR50 NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Lubricant (Unspecified), Flame Retardant

Zytel® FR50 NC010 is a 25% Glass Reinforced, Flame Retardant, Polyamide 66

Delrin® 527uv Nc010 product card banner

DuPont

Delrin® 527UV NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 527UV is a UV-stabilized medium viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 507 in mechanical performance after prolonged UV exposure and thermal stability.

Hytrel® 3078 product card banner

DuPont

Hytrel® 3078

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1070.0 - 1070.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 27.0 - 27.0 MPa

Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.

Delrin® 500p Bk602 product card banner

DuPont

Delrin® 500P BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, and a good combination of mechanical properties.

Zytel® Fr7026v0f Nc010 product card banner

DuPont

Zytel® FR7026V0F NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Flame Retardant

Zytel® FR7026V0F NC010 is a flame retardant, heat stabilized, polyamide 66 resin for injection molding. It does not contain elemental phosphorous or heavy metals and uses an halogen free flame retardant package.

Delrin® 577 Bk000 product card banner

DuPont

Delrin® 577 BK000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 4600.0 - 4600.0 MPa

Delrin® 577 is a medium viscosity acetal homopolymer (Polyoxymethylene POM) containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature. It contains carbon black for improved weathering.

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Delrin® 111pa Nc010 product card banner

DuPont

Delrin® 111PA NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 111PA NC010 is a Nucleated High Viscosity Acetal Homopolymer.

Kalrez® 6230 product card banner

DuPont

Kalrez® 6230

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: Black

Kalrez® 6230/6230A* perfluoroelastomer parts are a black product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6230/6230A parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6230/6230A parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability.

Zytel® 70g30hslr Bk099 product card banner

DuPont

Zytel® 70G30HSLR BK099

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 9000.0 - 9000.0 MPa

Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.

Hytrel® 5526 product card banner

DuPont

Hytrel® 5526

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Injection Molding

End Uses: Cosmetic Packaging, Appliances, Thermoforming Applications, Automotive Applications, Electrical/Electronic Applications, Office Automation Equipment, Bearings

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 200.0 - 200.0 MPa

Hytrel® 5526 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It is specially recommended for injection molding applications requiring high flow properties.Typical applications:Seals, packing and gaskets; gears and bearings.

Delrin® Fg911dp Nc010 product card banner

DuPont

Delrin® FG911DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3300.0 - 3300.0 MPa

Delrin® FG911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

Kalrez® 6221 product card banner

DuPont

Kalrez® 6221

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: White

Kalrez® 6221 perfluoroelastomer parts are a white product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6221 parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez® 6221 parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability. Kalrez® 6221 is available as O-rings. For white custom parts, please refer to Kalrez® LS205 parts.