Search:
Chassis & Brake
103 products found on DuPont DuPont products found for View all Chassis & Brakeon Knowde
With TDS
Hide Blends
With SDS
Delrin® 577 Bk000 product card banner

DuPont

Delrin® 577 BK000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 4600.0 - 4600.0 MPa

Delrin® 577 is a medium viscosity acetal homopolymer (Polyoxymethylene POM) containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature. It contains carbon black for improved weathering.

Delrin® 111pa Nc010 product card banner

DuPont

Delrin® 111PA NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 111PA NC010 is a Nucleated High Viscosity Acetal Homopolymer.

Delrin® Fg911dp Nc010 product card banner

DuPont

Delrin® FG911DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3300.0 - 3300.0 MPa

Delrin® FG911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

Zytel® 70g30hslr Bk099 product card banner

DuPont

Zytel® 70G30HSLR BK099

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 9000.0 - 9000.0 MPa

Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.

Zytel® 73g30hsl Bk416 product card banner

DuPont

Zytel® 73G30HSL BK416

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 8500.0 - 8500.0 MPa

Zytel® 73G30HSL BK416 is a 30% glass fiber reinforced, heat stabilized polyamide 6 for injection molding.

Delrin® Fg500mxd Bla090 product card banner

DuPont

Delrin® FG500MXD BLA090

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 3400.0 - 3400.0 MPa

Delrin® FG500MXD is a metal- and X-ray-detectable medium viscosity acetal homopolymer for injection molding and extrusion. It has been developed for applications in contact with food. Detection limits need to be determined as a function of the detector and other process variables.

Zytel® Htn52g35hsl Bk083 product card banner

DuPont

Zytel® HTN52G35HSL BK083

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/66 (PA 6T/66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 10300.0 - 10300.0 MPa

Zytel® HTN52G35HSL BK083 is a 35% glass-reinforced, heat stabilized, lubricated high performance polyamide resin that can be molded in water heated molds. It is also a PPA resin.

Delrin® 500mt Nc010 product card banner

DuPont

Delrin® 500MT NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Cable Extrusion, Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 1500.0 - 1500.0 MPa

Delrin® 500MT NC010 is a Medium Toughened, Toughened, Medium Viscosity Acetal Homopolymer.

Delrin® 500cpe Nc010 product card banner

DuPont

Delrin® 500CPE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 500CPE (DE20729) is a medium viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It provides good mechanical performances with improved processing, thermal stability and productivity for injection molding.

Delrin® 300cpe Nc010 product card banner

DuPont

Delrin® 300CPE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 300CPE (DE20732) is a medium-high viscosity acetal homopolymer with outstanding balance of ease of processing and part performance, and with very low VOC emissions. Delrin® 300CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.

Delrin® Fg100 Nc010 product card banner

DuPont

Delrin® FG100 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Flexural Modulus: 2700.0 - 2700.0 MPa

Delrin® FG100 NC010 is a High Viscosity Acetal Homopolymer.

Delrin® Fg111dp Nc010 product card banner

DuPont

Delrin® FG111DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® FG111DP is a high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

Zytel® 70g35hslra4 Bk267 product card banner

DuPont

Zytel® 70G35HSLRA4 BK267

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 10000.0 - 10000.0 MPa

Zytel® 70G35HSLRA4 BK267 is a 35% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding. It has excellent flow characteristics.

Zytel® Lcpa 158 Nc010 product card banner

DuPont

Zytel® LCPA 158 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding, Extrusion, Coating

Zytel® 158 NC010 is an intermediate viscosity polyamide 612 resin.

Zytel® 70g35hslx Bk357 product card banner

DuPont

Zytel® 70G35HSLX BK357

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 9500.0 - 9500.0 MPa

Zytel® 70G35HSLX BK357 is a 35% glass fiber reinforced, heat stabilized, black polyamide 66 for injection molding.

Dupont Dbf800 product card banner

DuPont

DuPont DBF800

Ready to Use Product Type: Brake Fluids

Chemical Family: Glycols

DBF800 is a glycol based, DOT 4 brake fluid. DBF800 meets or exceeds FMVSS 116, SAE J1704, and ISO 4925 standard requirements.

Delrin® 100km Nc000 product card banner

DuPont

Delrin® 100KM NC000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Fillers Included: Kevlar Fiber

Additives Included: Lubricant (Unspecified), Mold Release Agent

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 100KM NC000 is a high viscosity acetal homopolymer with Kevlar® aramid resin. It is designed for applications requiring low wear in abrasive environments.

Molykote® 7375 Lubolid Additive Powder product card banner

DuPont

MOLYKOTE® 7375 Lubolid Additive Powder

Features: Improved Anti-Wear, Vibration Reduction

MOLYKOTE® Lubolid Additive Powders Friction control additives. MOLYKOTE® Lubolid Additive Powders are suitable for use in the following applications: pads of disc brakes for passenger cars and commercial vehicles, linings for drum brakes, pads for railroad disc brakes, brake shoes for railroad wheel brakes, general industrial brake linings, and clutch linings.

Hytrel® Htr8223 Bk320 product card banner

DuPont

Hytrel® HTR8223 BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Bellows, Cosmetic Packaging, Automotive Applications, Constant Velocity Joint Boots, Containers, Bottles, Automotive Boots, Automotive Drivetrain, Film, Thermoforming Applications, Tubing, Automotive Bellows

Density: 1130.0 - 1130.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 79.0 - 79.0 MPa

Hytrel® HTR8223 BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 42D.Typical applications:Constant velocity joint boots.

Zytel® Xt70g35hsl Bk044a product card banner

DuPont

Zytel® XT70G35HSL BK044A

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 10000.0 - 10000.0 MPa

Zytel® XT70G35HSL BK044A is a 35% glass fiber reinforced, heat stabilized polyamide 66 resin for injection molding.It has been developed for good retention of properties over time at temperatures up to 220°C

Dupont Dbf372lb product card banner

DuPont

DuPont DBF372LB

Ready to Use Product Type: Brake Fluids

Chemical Family: Glycols

DuPont DBF372LB is a glycol based, DOT 3 brake fluid, typically used when low viscosity is needed. DBF372LB meets or exceeds FMVSS 116, SAE J1703, and ISO 4925 standard requirements.

Hytrel® Htr8724 Bk320 product card banner

DuPont

Hytrel® HTR8724 BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Blow Molding, Extrusion

End Uses: Appliances, Automotive Applications, Power/Other Tools, Automotive Bumpers, Suspension Jounce Bumpers, Automotive Suspension, Industrial Applications, Furniture, Sporting Goods, Suspension Strut Stoppers, Electrical/Electronic Applications, Shock Absorbers, Suspension Rebound Bumpers

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 110.0 - 110.0 MPa

Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilized, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilizers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free. The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry. Hytrel® HTR8724 BK320 is a heat stable, plasticiser-free, high viscosity thermoplastic polyester elastomer designed for extrusion and blow molding processes. It has been developed for demanding applications such as automotive jounce bumpers.

Delrin® 300cp Bk602 product card banner

DuPont

Delrin® 300CP BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Delrin® 300CP is a medium-high viscosity acetal homopolymer with improved thermal stability and an outstanding balance of ease of processing and part performance. This black is formulated to maintain the mechanical properties of the natural.

Delrin® 500tl Nc010 product card banner

DuPont

Delrin® 500TL NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: PTFE, PTFE Micropowder

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3100.0 - 3100.0 MPa

Delrin® 500TL is a medium viscosity acetal homopolymer containing 1.5% Teflon® PTFE Micropowder lubricant. It is designed for applications requiring reduced wear and friction against steel, itself, or other plastics.

Dupont Dbf315 product card banner

DuPont

DuPont DBF315

Ready to Use Product Type: Brake Fluids

Chemical Family: Glycols

DBF315 is a glycol based, DOT 3 brake fluid typically used for aftermarket applications. DBF315 meets or exceeds the FMVSS 116, SAE J1703, and ISO 4925 standard requirements. The brake fluid has a unique balance of ERBP and cold temperature viscosity to meet the ever changing market trends.

Dupont Dbf565 product card banner

DuPont

DuPont DBF565

Ready to Use Product Type: Brake Fluids

Chemical Family: Glycols

DBF565 is a glycol based, DOT 5.1 brake fluid. DBF565 meets or exceeds FMVSS 116, SAE J1704, and ISO 4925 standard requirements.

Dupont Dbf700 product card banner

DuPont

DuPont DBF700

Ready to Use Product Type: Brake Fluids

Chemical Family: Glycols

DBF700 is a glycol based, DOT 4 brake fluid. DBF700 meets or exceeds FMVSS 116, SAE J1704, and ISO 4925 standard requirements.

Delrin® Fg511dp Nc010 product card banner

DuPont

Delrin® FG511DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3200.0 - 3200.0 MPa

Delrin® FG511DP is a medium viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Zytel® Rs Lc2600 Bk043a product card banner

DuPont

Zytel® RS LC2600 BK043A

Polymer Name: Polyamide (unspecified)

Processing Methods: Injection Molding, Extrusion

Additives Included: Plasticizer (Unspecified)

Flexural Modulus: 900.0 - 900.0 MPa

Zytel® RS LC2600 BK043A is an unreinforced, plasticized, high viscosity, biobased long chain polyamide resin developed for air brake tubes and fluid handling applications.

Hytrel® Htr4275 Bk316 product card banner

DuPont

Hytrel® HTR4275 BK316

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Blow Molding, Injection Molding, Extrusion

End Uses: Hoses, Cosmetic Packaging, Crates, Pipes, Automotive Applications, Air Ducts, Containers, Bottles, Automotive Boots, Film, Automotive Air Management Line, Thermoforming Applications, Tubing, Cast Films

Density: 1170.0 - 1170.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 160.0 - 160.0 MPa

Hytrel® HTR4275 BK316 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 55D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.Typical applications:Hollow thin wall parts requiring a tough polymer with excellent flexibility and temperature properties such as automotive boots.

Hytrel® Htr8341c Bk320 product card banner

DuPont

Hytrel® HTR8341C BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Bellows, Cosmetic Packaging, Automotive Applications, Constant Velocity Joint Boots, Containers, Bottles, Automotive Boots, Automotive Drivetrain, Film, Thermoforming Applications, Tubing, Automotive Bellows

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 80.0 - 80.0 MPa

Hytrel® HTR8341C BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 40D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer. It shows excellent mechanical properties at elevated temperatures, superior fatigue, abrasion, and grease resistance.

Hytrel® 6356bkb product card banner

DuPont

Hytrel® 6356BKB

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Profiles, Film, Tubing, Fuel Tanks, Pipe Seals, Wire & Cable Applications, Gears, Hoses

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356BKB is a medium modulus grade with nominal hardness of 63D. It is a cube blend of Hytrel® 6356 and Hytrel® 40CB. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Delrin® 300cp Nc010 product card banner

DuPont

Delrin® 300CP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 300CP is a medium-high viscosity acetal homopolymer with improved thermal stability and an outstanding balance of ease of processing and part performance.

Delrin® 511cpe Nc010 product card banner

DuPont

Delrin® 511CPE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

Flexural Modulus: 3200.0 - 3200.0 MPa

Delrin® 511CPE is a medium viscosity acetal homopolymer with enhanced crystallization for faster cycle times, excellent creep and fatigue resistance, and very low VOC emissions. Delrin® 511CPE provides improved thermal stability, excellent dimensional stability, low warpage, fewer voids, and improved productivity for injection molding.

Molykote® D-79 Lubolid Additive Powder product card banner

DuPont

MOLYKOTE® D-79 Lubolid Additive Powder

Features: Friction Reduction, Wear Protection

MOLYKOTE® Lubolid Additive Powders is friction control additives. MOLYKOTE® Lubolid Additive Powders are suitable for use in the following applications: pads of disc brakes for passenger cars and commercial vehicles, linings for drum brakes, pads for railroad disc brakes, brake shoes for railroad wheel brakes, general industrial brake linings, and clutch linings.

Delrin® 100ale Nc010 product card banner

DuPont

Delrin® 100ALE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Delrin® 100ALE is a high viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It contains an advanced system of lubrication designed for low wear, low friction, and low noise against metals and plastics.