

DuPont
Kalrez® Spectrum™ 6375
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats
Features: High Temperature Resistance, Good Thermal Stability, Chemical Resistant
End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools, Semiconductor Applications, Ball Valves, Measurement While Drilling Tools, Valves, Electric Submersible Pump
Color: Black
Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.


DuPont
Delrin® 100 NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.


DuPont
Delrin® 100AF
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Fillers Included: PTFE, PTFE Fiber
Additives Included: Lubricant (Unspecified), Mold Release Agent
Flexural Modulus: 2500.0 - 2500.0 MPa
Delrin® 100AF is a high viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.


DuPont
Kalrez® Spectrum™ 7075
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats
Features: Good Seal Force Retention, High Temperature Resistance, Low Compression Set, Good Thermal Stability, Chemical Resistant
End Uses: Flanges, Semiconductor Applications, Pump Parts, Hot Glue Delivery Nozzle, Valves, Valve Parts
Color: Black
Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.


DuPont
Hytrel® 6356
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1220.0 - 1220.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 290.0 - 290.0 MPa
Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.


DuPont
Hytrel® 7246
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding
End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord
Density: 1260.0 - 1260.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 550.0 - 550.0 MPa
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.


DuPont
Hytrel® 5556
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 190.0 - 190.0 MPa
Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.


DuPont
Hytrel® 4556
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films
Density: 1140.0 - 1140.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 87.0 - 87.0 MPa
Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.


DuPont
Delrin® 500AF
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Injection Molding
Fillers Included: PTFE, PTFE Fiber
Additives Included: Lubricant (Unspecified), Mold Release Agent
Flexural Modulus: 2500.0 - 2500.0 MPa
Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.


DuPont
Hytrel® 8238
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1280.0 - 1280.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 1150.0 - 1150.0 MPa
Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.


DuPont
Zytel® 70G30HSLR BK099
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 - 9000.0 MPa
Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.


DuPont
Hytrel® 5526
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Injection Molding
End Uses: Cosmetic Packaging, Appliances, Thermoforming Applications, Automotive Applications, Electrical/Electronic Applications, Office Automation Equipment, Bearings
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 200.0 - 200.0 MPa
Hytrel® 5526 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It is specially recommended for injection molding applications requiring high flow properties.Typical applications:Seals, packing and gaskets; gears and bearings.


DuPont
Zytel® HTN51G35EF BK083
Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 11000.0 - 11000.0 MPa
Zytel® HTN51G35EF BK083 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin developed for electrical and electronics applications. It is also a PPA resin.


DuPont
Delrin® 500T BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.


DuPont
Zytel® HTN52G35HSL BK083
Polymer Name: Polyphthalamide (PPA), Polyamide 6T/66 (PA 6T/66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 10300.0 - 10300.0 MPa
Zytel® HTN52G35HSL BK083 is a 35% glass-reinforced, heat stabilized, lubricated high performance polyamide resin that can be molded in water heated molds. It is also a PPA resin.


DuPont
Crastin® ST820 NC010
Polymer Name: Thermoplastic Polyester, Polybutylene Terephthalate (PBT)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding, Coating
Additives Included: Mold Release Agent
Flexural Modulus: 1550.0 - 1550.0 MPa
Crastin® ST820 NC010 is an unreinforced, Super Tough polybutylene terephthalate resin for injection molding.


DuPont
Hytrel® 4056
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Cosmetic Packaging, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment, Wire & Cable Applications, Hoses
Density: 1160.0 - 1160.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 60.0 - 60.0 MPa
Hytrel® 4056 is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, beltingand seals,.


DuPont
Hytrel® G4074
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Electrical/Electronic Applications, Cast Films, Wire & Cable Applications, Hoses, General Purpose, Cosmetic Packaging, Appliances, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing
Density: 1180.0 - 1180.0 kg/m³
Strain at Break: 250.0 - 250.0 %
Flexural Modulus: 65.0 - 65.0 MPa
Hytrel® G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, mouldedproducts. Not suited for light-colored finished products.


DuPont
Kalrez® 0090
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings, Valve Seats
Features: High Modulus, Durable, Good Thermal Stability, High Hardness, Chemical Resistant
End Uses: Semiconductor Applications, Pump Parts, Valves, O Rings, Valve Parts
Color: Black
Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).


DuPont
Delrin® 100ST BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 1100.0 - 1100.0 MPa
Delrin® 100ST BK602 is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.


DuPont
Delrin® 500T NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.


DuPont
Zytel® 70G35EF NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent
Flexural Modulus: 10000.0 - 10000.0 MPa
Zytel® 70G35EF NC010 is a 35% glass-reinforced polyamide 66 developed for electrical and electronics applications.


DuPont
MULTIBASE™ HMB-1103
Function: Slip Agent, Melt Flow Agent, Anti-Wear Agent
Compatible Polymers & Resins: Polyamides, Polyoxymethylene (POM)
Chemical Family: Silicones
DuPont HMB-1103 Masterbatch is a new-generation tribological modifier and processing aid designed for polar engineered based systems such as PA. DuPont HMB-1103 Masterbatch delivers slip and wear performance similar to that of standard, highly loaded PTFE compounds. DuPont HMB-1103 Masterbatch is also highly efficient at suppressing stick-slip phenomenon. DuPont HMB-1103 Masterbatch acts as a processing aid and improves flowability.


DuPont
Zytel® HTN51G35HSL NC010
Polymer Name: Polyamide 6T/XT (PA 6T/XT), Polyphthalamide (PPA)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 10300.0 - 10300.0 MPa
Zytel® HTN51G35HSL NC010 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin. It is also a PPA resin.


DuPont
Kalrez® 8575
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings, Valve Seats
Features: Good Elastic Recovery, Low Outgassing, Good Mechanical Properties, Long Seal Life, Low Compression Set, Good Thermal Stability, Less Infrared Absorption
End Uses: Valve Parts, Semiconductor Applications, Valves
Color: White
Kalrez® 8575 perfluoroelastomer parts are a white product for oxidation, diffusion, lamp anneal and RTP sealing applications. Kalrez® 8575 exhibits excellent thermal stability and long-term sealing performance, less Infrared (IR) absorption and significantly reduced outgassing properties at elevated temperatures. It also has good mechanical properties and is well-suited for both static and low stress/low sealing force applications. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for all 8575 parts._x005F


DuPont
Vespel® CR-6110
Physical Form: Seals
Features: UV Resistant
End Uses: Semiconductor Applications, Bearings
Vespel® CR-6110 shapes are the latest carbon-fiber filled thermoplastic fluoropolymer that have demonstrated outstanding performance in aggressive wet chemical / plasma conditions and elevated temperatures.


DuPont
Zytel® E51HSB NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding, Coating
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 - 2800.0 MPa
Zytel® E51HSB NC010 is a high molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion.


DuPont
Hytrel® 4068FG
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Corrugated Pipe, Film, Thermoforming Applications, Tubing, Wire & Cable Applications
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 47.0 - 47.0 MPa
Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.


DuPont
Delrin® 100ST NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 1100.0 - 1100.0 MPa
Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.


DuPont
Crastin® ST820 BK503
Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester
Processing Methods: Injection Molding, Extrusion, Coating, Sheet, Plaques & Profiles Extrusion
Flexural Modulus: 1500.0 - 1500.0 MPa
Crastin® ST820 BK503 is an unreinforced, Super Tough polybutylene terephthalate resin for injection molding.


DuPont
Zytel® HTN51G35HSL BK083
Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 12600.0 - 12600.0 MPa
Zytel® HTN51G35HSL BK083 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin. It is also a PPA resin.


DuPont
Hytrel® 4069
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Hoses, Belts/Belt Repair, Cosmetic Packaging, Appliances, Automotive Applications, Corrugated Pipe, Film, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 45.0 - 45.0 MPa
Hytrel® 4069 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.


DuPont
Vespel® SP-2515
Polymer Name: Thermoplastic Polyimide (TPI), Polyimide (PI)
Physical Form: Seals
Features: Low Friction, Good Thermal Stability, Dimensional Stability, Low Energy Consumption
End Uses: Semiconductor Applications, Bushings, Washer
Parts made from Vespel® SP-2515 offer a low coefficient of thermal expansion (CTE), excellent wear against both aluminum and steel alloys, and a low coefficient of friction in both dry and lubricated conditions. These properties make Vespel® SP-2515 parts ideal for applications such as seal rings, thrust washers, and bushings where high energy efficiency and dimensional stability, over a broad range of temperatures, are a requirement.


DuPont
Crastin® SK603 NC010
Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent
Flexural Modulus: 6500.0 - 6500.0 MPa
Crastin® SK603 NC010 is a 20% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.


DuPont
Zytel® HTN51G35HSLR BK420
Polymer Name: Polyamide 6T/XT (PA 6T/XT), Polyphthalamide (PPA)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 10500.0 - 10500.0 MPa
Zytel® HTN51G35HSLR BK420 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin. It is also a PPA resin.


DuPont
Zytel® HTN54G35HSLR BK031
Polymer Name: Polyphthalamide (PPA), Polyamide (unspecified)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 9300.0 - 9300.0 MPa
Zytel® HTN54G35HSLR BK031 is a 35% glass-reinforced, toughened, heat stabilized high performance polyamide resin. It is also a PPA resin.