DuPont
Delrin® 500P NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3000.0 - 3000.0 MPa
Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, a good combination of mechanical properties, and low VOC emissions.
DuPont
Delrin® 100 NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.
DuPont
Delrin® 100P NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.
DuPont
Hytrel® 7246
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding
End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord
Density: 1260.0 - 1260.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 550.0 - 550.0 MPa
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.
DuPont
Delrin® 527UV NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3000.0 - 3000.0 MPa
Delrin® 527UV is a UV-stabilized medium viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 507 in mechanical performance after prolonged UV exposure and thermal stability.
DuPont
Delrin® 500AF
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Injection Molding
Fillers Included: PTFE, PTFE Fiber
Additives Included: Lubricant (Unspecified), Mold Release Agent
Flexural Modulus: 2500.0 - 2500.0 MPa
Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.
DuPont
Delrin® 500P BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3000.0 - 3000.0 MPa
Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, and a good combination of mechanical properties.
DuPont
Zytel® 70G30HSLR BK099
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 - 9000.0 MPa
Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.
DuPont
Delrin® 500T BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.
DuPont
Zytel® 70G30HSLR NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 - 9000.0 MPa
Zytel® 70G30HSLR NC010 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.
DuPont
Delrin® 500CPE NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 500CPE (DE20729) is a medium viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It provides good mechanical performances with improved processing, thermal stability and productivity for injection molding.
DuPont
Delrin® 100ST BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 1100.0 - 1100.0 MPa
Delrin® 100ST BK602 is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.
DuPont
Delrin® 300CPE NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 300CPE (DE20732) is a medium-high viscosity acetal homopolymer with outstanding balance of ease of processing and part performance, and with very low VOC emissions. Delrin® 300CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.
DuPont
Delrin® 527UV BK701
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3000.0 - 3000.0 MPa
Delrin® 527UV is a UV-stabilized medium viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 507 in mechanical performance after prolonged UV exposure and thermal stability.
DuPont
Delrin® 500AL NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 500AL is a medium viscosity acetal homopolymer containing an advanced system of lubrication designed for low wear, low friction, and low noise against metals and plastics.
DuPont
Delrin® 500T NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.
DuPont
Zytel® 70G35HSLRA4 BK267
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 10000.0 - 10000.0 MPa
Zytel® 70G35HSLRA4 BK267 is a 35% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding. It has excellent flow characteristics.
DuPont
Zytel® FR50 BK505
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Lubricant (Unspecified), Flame Retardant
Flexural Modulus: 9500.0 - 9500.0 MPa
Zytel® FR50 BK505 is a 25% glass fiber reinforced, flame retardant polyamide 66 resin for injection molding.
DuPont
Zytel® 80G33HS1L NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 7500.0 - 7500.0 MPa
Zytel® 80G33HS1L NC010 is a 33% glass fiber reinforced heat stabilized polyamide 66 resin with outstanding impact resistance developed using DuPont Super Tough technology.
DuPont
Delrin® 100ST NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 1100.0 - 1100.0 MPa
Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.
DuPont
Zytel® ST801AW BK195
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Flexural Modulus: 1800.0 - 1800.0 MPa
Zytel® ST801AW BK195 is a Super Tough, high performance polyamide 66 resin. It is UV stabilized and when appropriately colored offers the best resistance to indirect sunlight in automotive interior applications.
DuPont
Delrin® 520MP NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Fillers Included: PTFE, PTFE Micropowder
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2700.0 - 2700.0 MPa
Delrin® 520MP is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE Micropowder lubricant. It is designed for applications requiring low wear and friction against steel, itself, or other plastics.
DuPont
Delrin® 100T NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 1700.0 - 1700.0 MPa
Delrin® 100T is a toughened, high viscosity acetal homopolymer with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is required.
DuPont
Delrin® 100 BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 2900.0 - 2900.0 MPa
Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.
DuPont
Crastin® LW9030 NC010
Polymer Name: PBT/ASA Alloy
Processing Methods: Injection Molding
Density: 1440.0 - 1440.0 kg/m³
Flexural Modulus: 8500.0 - 8500.0 MPa
Crastin® LW9030 NC010 is a 30% glass fiber reinforced polybutylene terephthalate blend for injection molding. It has improved surface aesthetics, excellent dimensional stability and low warpage characteristics.
DuPont
Hytrel® DYM350BK
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET), Polybutylene Terephthalate (PBT)
Processing Methods: Injection Molding
End Uses: SRS Pretensioner, Automotive Safety Retractor, Automotive Applications, SRS Adjuster, SRS Seatbelt, SRS Airbag, Safety Restrain System, SRS Actuator, Automotive Safety Pushbutton, SRS Pillar Loop, Automotive Safety, Safety Equipment
Density: 1180.0 - 1180.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 430.0 - 430.0 MPa
Hytrel® DYM350BK is a medium modulus polyester alloy suited for injection molding of Air Bag Deployment Doors. It has a nominal durometer hardness of 55D and contains fine particle size carbon black.Typical applications:Air bag deployment door.
DuPont
Zytel® 73G35HSL BK262
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9500.0 - 9500.0 MPa
Zytel® 73G35HSL BK262 is a 35% glass fiber reinforced, heat stabilized, black polyamide 6 resin for injection molding.
DuPont
Zytel® ST801AW NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent
Flexural Modulus: 1800.0 - 1800.0 MPa
Zytel® ST801AW NC010 is a Super Tough, high performance polyamide 66 resin. It is UV stabilized and when appropriately colored offers the best resistance to indirect sunlight in automotive interior applications.
DuPont
Delrin® 100T BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Delrin® 100T is a toughened, high viscosity acetal homopolymer with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is required.
DuPont
Zytel® 80G33HS1L BK104
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 7600.0 - 7600.0 MPa
Zytel® 80G33HS1L BK104 is a 33% glass fiber reinforced heat stabilized polyamide 66 resin with outstanding impact resistance developed using DuPont Super Tough technology.
DuPont
Delrin® 500TL NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Fillers Included: PTFE, PTFE Micropowder
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3100.0 - 3100.0 MPa
Delrin® 500TL is a medium viscosity acetal homopolymer containing 1.5% Teflon® PTFE Micropowder lubricant. It is designed for applications requiring reduced wear and friction against steel, itself, or other plastics.
- 1
- 2