Company logo

Products

DuPont
Food & Nutrition
Applications
Processing & Packaging
58 products found on DuPont in Food & Nutrition .
With TDS
With SDS
Kalrez® 4079 product card banner

DuPont

Kalrez® 4079

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings

Features: Good Mechanical Properties, High Temperature Resistance, Heat Aging Resistant, Low Compression Set, Good Thermal Stability, Chemical Resistant, General Purpose

End Uses: Semiconductor Applications, Pump Parts, Aircraft Applications

Color: Black

Kalrez® 4079 perfluoroelastomer parts are a low compression set product for general purpose use in O-rings, diaphragms, seals and other parts used in the chemical process and aircraft industries. It is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature cycling effects. A maximum service temperature of 316°C (600°F) is suggested, with short excursions to higher temperatures possible. Kalrez® 4079 is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.

Kalrez® 9100 product card banner

DuPont

Kalrez® 9100

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Excellent Resistance To Plasma Radicals, Low Compression Set, Good Thermal Stability, Good Elastic Recovery, Low Outgassing, Low Metal Content, Good Mechanical Properties

End Uses: Semiconductor Applications, Pump Parts

Color: Amber

Kalrez® 9100 is an amber translucent product targeted specifically for PECVD, ALD, HDPCVD and Conductor (Poly/Metal) Etch applications*. Kalrez® 9100 has been specifically designed for low erosion and ultra-low particle generation in harsh plasma environments. It offers excellent thermal stability, very low outgassing as well as excellent elastic recovery and good mechanical strength properties and is well suited for both static and select dynamic sealing applications*. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for allKalrez® 9100 parts.

Kalrez® 6230 product card banner

DuPont

Kalrez® 6230

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: Black

Kalrez® 6230/6230A* perfluoroelastomer parts are a black product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6230/6230A parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6230/6230A parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability.

Kalrez® 6221 product card banner

DuPont

Kalrez® 6221

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: White

Kalrez® 6221 perfluoroelastomer parts are a white product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6221 parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez® 6221 parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability. Kalrez® 6221 is available as O-rings. For white custom parts, please refer to Kalrez® LS205 parts.

Kalrez® Spectrum™ 7375 product card banner

DuPont

Kalrez® Spectrum™ 7375

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Compressive Strength, Good Mechanical Properties, Good Retention of Properties

End Uses: Semiconductor Applications, Pump Parts

Color: Black

Kalrez® Spectrum™ 7375 perfluoroelastomer parts are an innovative FFKM product based on a patented crosslinking system for chemical process industry applications where broad chemical and water/steam resistance are needed at elevated temperatures. Kalrez® Spectrum™ 7375 parts exhibit excellent compression set resistance, outstanding physical property retention, and good mechanical strength properties. A maximum application temperature of 300°C is suggested.

Kalrez® Spectrum™ 6380 product card banner

DuPont

Kalrez® Spectrum™ 6380

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Chemical Resistant, Good Mechanical Properties

End Uses: Semiconductor Applications, O Rings

Color: Cream

Kalrez® Spectrum™ 6380 perfluoroelastomers parts are a non-black product developed specifically for chemical processes involving hot, aggressive amines. In addition, it has excellent overall chemical resistance (see chart below). This cream colored product is easily identifiable when selecting an O-ring material for harsh chemical plant services. This material has excellent mechanical properties and is a top choice for both static and dynamic sealing applications. A maximum service temperature of 225°C is suggested while short-term excursions to higher temperatures are permissible.

Kalrez® 9500 product card banner

DuPont

Kalrez® 9500

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Ozone Resistant, Good Thermal Stability, Low Outgassing, Low Metal Content, Good Mechanical Properties, Low Erosion

End Uses: Semiconductor Applications, Pump Parts

Color: Tan

Kalrez® 9500 perfluoroelastomer parts are a tan product targeted specifically for deposition processes where ozone, ammonia and water vapor are used for processing, e.g. SACVD, FCVD, PECVD curing processes, etc. It has been specifically designed for use in applications where the plasma environment is more chemical, i.e., where oxygen and fluorine radicals are more dominant.

Kalrez® 8900 product card banner

DuPont

Kalrez® 8900

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: O-rings, Seals

Features: Fluorine Gas Resistant, Low Moisture Content, Excellent Resistance To Plasma Radicals, Low Compression Set, Good Thermal Stability, Low Outgassing

End Uses: Semiconductor Applications, O Rings

Color: Black

Kalrez® 8900 perfluoroelastomer parts are a black product for oxidation, diffusion, ALD, and LPCVD applications. It offers outstanding thermal stability, very low outgassing and excellent (low) compression set properties. Kalrez® 8900 parts exhibit excellent retention of physical properties at elevated temperatures, have excellent mechanical strength and are well-suited for both static and dynamic sealing applications. A maximum application temperature of 325°C (617°F) is suggested. Short excursions to higher temperatures may also be possible. Ultrapure post-cleaning and packaging is_x005F standard for all Kalrez® 8900 parts. _x005F

Hytrel® 5553fg Nc010 product card banner

DuPont

Hytrel® 5553FG NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Extrusion, Film Extrusion, Thermoforming, Casting, Injection Molding, Coating

End Uses: Cosmetic Packaging, Appliances, Non Specific Food Applications, Thermoforming Applications

Density: 1200.0 - 1200.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® 5553FG NC010 is a high performance thermoplastic polyester elastomer developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Zytel® Bm70g20hslx Bk537 product card banner

DuPont

Zytel® BM70G20HSLX BK537

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Blow Molding, Injection Molding, Extrusion

Fillers Included: Glass Fiber

Flexural Modulus: 6000.0 - 6000.0 MPa

Zytel® BM70G20HSLX BK537 is a 20% glass fiber reinforced polyamide 66 for blow molding.

Hytrel® 4068fg product card banner

DuPont

Hytrel® 4068FG

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Cables, Corrugated Pipe, Film, Thermoforming Applications, Wires, Tubing

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 47.0 - 47.0 MPa

Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Kalrez® Spectrum™ 7090 product card banner

DuPont

Kalrez® Spectrum™ 7090

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: High Modulus, Good Thermal Stability, High Hardness, Good Compressive Strength, Chemical Resistant, Good Mechanical Properties, Good Seal Force Retention

End Uses: Semiconductor Applications, Pump Parts

Color: Black

Kalrez® Spectrum™ 7090 perfluoroelastomer parts are specifically targeted for use in applications requiring high hardness/higher modulus properties. These specialty black parts have excellent mechanical properties including compression set resistance, seal force retention, response to temperature cycling effects and rapid gas decompression resistance. Kalrez® Spectrum™ 7090 perfluoroelastomer parts are well suited for both static and dynamic sealing applications, especially applications that require extrusion resistance at higher temperatures. They also offer outstanding thermal stability and chemical resistance. A maximum service temperature of 325°C (617°F) is suggested. Short excursions to higher temperatures may also be possible.

Molykote® P-1900 Fm Anti-seize Paste product card banner

DuPont

MOLYKOTE® P-1900 FM Anti-Seize Paste

Ready to Use Product Type: Anti-sieze Compound

Application Areas: Food Processing

Compatible Substrates & Surfaces: Nickel, Carbide, Plastics, Iron, Brass, Titanium, Aluminum, Metal, Steel, Fiberglass, Stainless Steel, Glass, Copper, Elastomers & Rubbers

Features: Wash-Off Resistance, Effective Load Builder, Food Contact Acceptable, Water Resistant

Chemical Family: Aluminum Compounds, Aluminum Complexes, Mineral Oils

Molykote® P-1900 Food Machinery Anti-Seize Paste is a mineral oil-based anti-seize paste fortified with a synergistic combination of solid lubricants that meets FDA regulations 21 CRF 178.3570 and NSF H1 classification for incidental food contact. Molykote® P-1900 Paste offers excellent low coefficient of friction and high load carrying capacity.

Zytel® Htnfr52g35nhf Bk337 product card banner

DuPont

Zytel® HTNFR52G35NHF BK337

Polymer Name: Polyamide (unspecified)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Flame Retardant

Flexural Modulus: 11200.0 - 11200.0 MPa

Zytel® HTNFR52G35NHF BK337 by DuPont is comprised of Polyamide (unspecified). It is commonly used

Zytel® Htnwrf51g30 Nc010 product card banner

DuPont

Zytel® HTNWRF51G30 NC010

Polymer Name: Polyamide (unspecified)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 9300.0 - 9300.0 MPa

Zytel® HTNWRF51G30 NC010 by DuPont is comprised of Polyamide (unspecified). It is commonly used

Kalrez® Spectrum™ 7275 product card banner

DuPont

Kalrez® Spectrum™ 7275

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Compressive Strength, Good Mechanical Properties, Good Retention of Properties

End Uses: Semiconductor Applications, Pump Parts

Color: Brown

Kalrez® Spectrum™ 7275 parts are a light brown product based on a proprietary crosslinking system targeted specifically for the chemical processing industry. It exhibits minimal swelling and improved retention of physical properties when exposed to aggressive chemicals, e.g., concentrated nitric acid, organosilanes, chlorosiloxanes, pure ethylene oxide, butyraldehyde, amines and vinyl and acrylic monomers. It also has excellent compression set resistance and good retention of physical properties after aging at high temperatures. A maximum service temperature of 300°C is suggested.

Kalrez® 8085 product card banner

DuPont

Kalrez® 8085

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Mechanical Properties, Excellent Resistance To Plasma Radicals, Long Seal Life

End Uses: Semiconductor Applications, Pump Parts

Color: Beige

Kalrez® 8085 perfluoroelastomer parts are a beige, general purpose product for select etch, ash/strip and deposition processes. It has been formulated for minimal particle generation in NF3 plasma. Kalrez® 8085 exhibits very low particle generation and low weight loss in oxygen and fluorine-based plasmas, has excellent mechanical strength and is well-suited for both static and dynamic sealing applications (e.g., bonded slit valve doors, bonded gate valves, bonded pendulum valves, gas orifice seals, gas feedthrough seals, chamber lid seals, etc.) A maximum continuous service temperature of 240 °C is suggested. Kalrez® 8085 can also withstand short-term excursions to 275 °C. Ultrapure post-cleaning and packaging is standard for all Kalrez® 8085 parts.

Kalrez® 9600 product card banner

DuPont

Kalrez® 9600

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Erosion Resistance, Low Compression Set, Good Thermal Stability, Low Outgassing, Good Seal Force Retention

End Uses: Semiconductor Applications, Pump Parts

Color: Green

Kalrez® 9600 perfluoroelastomer parts are designed for high purity, high temperature vacuum applications where seals are exposed to damaging Fluorine and Oxygen plasma radicals. In addition to its extremely low erosion rate and weight loss from plasma attack, this well balanced material provides excellent chemical resistance to Ammonia, Ozone, and Water Vapor. Its outstanding resilience in compression and ultra-low outgassing at high temperature conditions makes it especially suitable for applications where purity of the process environment is paramount, such as Plasma-Enhanced Atomic Layer Deposition and Chemical Vapor Deposition processes used in fabricating next generation semiconductor chips. A maximum application temperature of 315°C is suggested. Ultrapure cleaning and packaging are standard for all Kalrez® 9600 parts._x005F

Zytel® Fg50 Nc010 product card banner

DuPont

Zytel® FG50 NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding, Extrusion, Film Extrusion, Coating, Casting

Zytel® FG50 is an unreinforced, high viscosity polyamide 66 for injection molding and extrusion. It has improved break resistance for thick-walled parts. It has been developed for consideration into applications such as parts for the food industry.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® Fg100p Nc010 product card banner

DuPont

Delrin® FG100P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2600.0 - 2600.0 MPa

Delrin® FG100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. It provides a great combination of toughness and strength, and improved processing thermal stability and productivity for injection molding. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® Fg500p Nc010 product card banner

DuPont

Delrin® FG500P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® FG500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability and a good combination of mechanical properties. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Kalrez® 8002 product card banner

DuPont

Kalrez® 8002

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Low Compression Set, Excellent Plasma Cracking Resistance

End Uses: Semiconductor Applications, Pump Parts

Color: Transparent

Kalrez® 8002 perfluoroelastomer parts are a clear product for ash/strip applications. This unfilled product offers excellent plasma-cracking resistance and ultra-low particle generation in oxygen and fluorine-based plasmas versus mineral-filled products. Kalrez® 8002 exhibits excellent resistance to dry process chemistry, has good mechanical strength and is well suited for static, low stress/low sealing force and select bonded door seal applications. A maximum application temperature of 275°C (527°F) is suggested. Ultrapure post cleaning and packaging is standard for all Kalrez® 8002 parts.

Molykote® Food Machinery Spray Oil product card banner

DuPont

MOLYKOTE® Food Machinery Spray Oil

Ready to Use Product Type: Machining Oils, Oil

Application Areas: Machine Parts

Features: Corrosion Resistant, Effective Load Builder, Food Grade, Odorless, Anti-Wear Properties, High Capacity of Penetration, Extreme Pressure Performance

Chemical Family: Mineral Oils

MOLYKOTE® Food Machinery Spray Oil is a multi-purpose mineral oil spray for food processing equipment.

Zytel® Lc6601 Nc010 product card banner

DuPont

Zytel® LC6601 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding, Extrusion, Film Extrusion

Flexural Modulus: 800.0 - 800.0 MPa

Zytel® LC6601 NC010 by DuPont is comprised of Polyamide 612. It is commonly used

Kalrez® Aeroseal™ 7800 product card banner

DuPont

Kalrez® AeroSeal™ 7800

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: High Thermo-Oxidative Stability, Good Thermal Stability, Good Compressive Strength, Low Corrosion, Good Mechanical Properties, Good Seal Force Retention

End Uses: Aerospace Applications, Semiconductor Applications, Pump Parts

Color: Black

Kalrez® AeroSeal® 7800* perfluoroelastomer parts are a specialty black product that meets the requirements of Aerospace Material Specification (AMS) 7257. It offers outstanding thermal stability and compression set resistance along with excellent seal force retention properties. It also offers excellent resistance to High Thermo-Oxidative Stability (HTS) gas turbine engine lubricating oils and has excellent response to temperature cycling effects._x005F Kalrez® AeroSeal® 7800 parts have good mechanical properties and are well suited for both static and dynamic sealing applications. A maximum temperature of 325°C (617°F) is suggested. Short excursions to higher temperatures may also be possible._x005F

Zytel® Htnfe18502 Nc010 product card banner

DuPont

Zytel® HTNFE18502 NC010

Polymer Name: Polyamide (unspecified)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1700.0 - 1700.0 MPa

Zytel® HTNFE18502 NC010 by DuPont is comprised of Polyamide (unspecified). It is commonly used

Zytel® Fgfe5171 Nc010c product card banner

DuPont

Zytel® FGFE5171 NC010C

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 9300.0 - 9300.0 MPa

Zytel® FGFE5171 NC010C is a 33% glass filled nylon 66 resin. It has been developed for consideration into applications such as parts for the food industry.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Hytrel® 6359fg Nc010 product card banner

DuPont

Hytrel® 6359FG NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Appliances, Non Specific Food Applications

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® 6359FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. Typical applications:Conveyor belts and tubing, containers with good permeation resistance to gases and liquids.

Molykote® D Paste product card banner

DuPont

MOLYKOTE® D Paste

Ready to Use Product Type: Anti-sieze Compound

Application Areas: Slideways, Food Processing

Compatible Substrates & Surfaces: Carbide, Iron, Brass, Titanium, Aluminum, Metal, Steel, Stainless Steel, Copper

Features: Corrosion Resistant, Effective Load Builder, Anti-Slip

MOLYKOTE® D Paste is an off-white solid-lubricant-based paste with the consistency of an NLGI 2-3 grease, made of a combination of white solid lubricants and mineral oil.

Kalrez® 9300 product card banner

DuPont

Kalrez® 9300

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Thermal Stability, Low Metal Content, Good Mechanical Properties, Low Erosion, Excellent Resistance To Plasma Radicals

End Uses: Semiconductor Applications, Pump Parts

Color: Brown

Kalrez® 9300 perfluoroelastomer parts are a brown product for Dielectric (Oxide) Etch applications. It has been specifically designed for use in applications where the plasma environment is a combination of ions (physical) and radicals (chemical), i.e., where a balance of physical and chemical plasma erosion resistance is typically required.

Delrin® Fg900p Nc010 product card banner

DuPont

Delrin® FG900P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® FG900P is a general purpose low viscosity acetal homopolymer for multicavity and thin wall molding with improved processing thermal stability. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® Fg311dp Nc010 product card banner

DuPont

Delrin® FG311DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Film Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3100.0 - 3100.0 MPa

Delrin® FG311DP is a medium-high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Molykote® G-1502 Fm Synthetic Bearing & Gear Grease product card banner

DuPont

MOLYKOTE® G-1502 FM Synthetic Bearing & Gear Grease

Ready to Use Product Type: Grease

Application Areas: Chains, Bearings, Chain Sprockets, Valves, Cams, Slides

Compatible Substrates & Surfaces: Plastics, Elastomers & Rubbers

Features: Water Resistant, Service Life Extension, Oxidation Resistant, Corrosion Resistant, Good Adhesion, Wash-Off Resistance, Low Temperature Performance, Hot Tack Strength, Wide Temperature Operating Range

Chemical Family: Aluminum Compounds, Aluminum Complexes, Polyalphaolefins (PAO), Polyolefins

Thickener Type: Aluminum Complex

MOLYKOTE® G-1502 FM Synthetic Bearing & Gear Grease is a synthetic bearing & gear grease.

Zytel® Lcpa Fg158 Nc010 product card banner

DuPont

Zytel® LCPA FG158 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding, Extrusion, Coating

Zytel® LCPA FG158 NC010 by DuPont is comprised of Polyamide 612. It is commonly used Zytel® LCPA FG158 NC010 is certified as EFfCI GMP Certified.

Molykote® 316 Silicone Release Spray product card banner

DuPont

MOLYKOTE® 316 Silicone Release Spray

Ready to Use Product Type: Release Lubricant

Application Areas: Valves

Compatible Substrates & Surfaces: Carbide, Brass, Titanium, Aluminum, Metal, Copper, Elastomers & Rubbers, Nickel

Features: Oxidation Resistant, Non Stick, Heat Stabilized, Good Release Properties, Low Volatility, Food Contact Acceptable

Chemical Family: Silicones

MOLYKOTE® 316 Silicone Release Spray is used as a release agent for many food and industrial applications.

Kalrez® W240 product card banner

DuPont

Kalrez® W240

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Low Metal Content, Good Mechanical Properties, Good Compression Set

End Uses: Semiconductor Applications, Pump Parts

Color: Black

Kalrez® W240 perfluoroelastomer parts are a black product for photovoltaic wet manufacturing processes requiring a wide range of chemical resistance. W240 provides an excellent combination of properties (resistance to acids/bases) and is the product of choice for wet processes as an upgrade from standard elastomers, i.e., FKM, NBR, EPDM, etc. A maximum service temperature of 230°C is suggested.