Company logo

Products

DuPont
Search:
Tubing & Fluids Handling
70 products found on DuPont DuPont products found for View all Tubing & Fluids Handlingon Knowde
With TDS
Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® 5556 product card banner

DuPont

Hytrel® 5556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.

Hytrel® 4556 product card banner

DuPont

Hytrel® 4556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Delrin® Sc698 Nc010 product card banner

DuPont

Delrin® SC698 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 3000.0 - 3000.0 MPa

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® SC698 NC010 is a lubricated low viscosity acetal homopolymer, developed for high precision thin-walled parts requiring low wear and low friction with excellent surface aspect.

Hytrel® 3078 product card banner

DuPont

Hytrel® 3078

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1070.0 - 1070.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 27.0 - 27.0 MPa

Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Delrin® 500t Bk602 product card banner

DuPont

Delrin® 500T BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2100.0 - 2100.0 MPa

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Hytrel® G4074 product card banner

DuPont

Hytrel® G4074

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Electrical/Electronic Applications, Cast Films, Wire & Cable Applications, Hoses, General Purpose, Cosmetic Packaging, Appliances, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing

Density: 1180.0 - 1180.0 kg/m³

Strain at Break: 250.0 - 250.0 %

Flexural Modulus: 65.0 - 65.0 MPa

Hytrel® G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, mouldedproducts. Not suited for light-colored finished products.

Liveo™ Pharma 50 Tubing product card banner

DuPont

Liveo™ Pharma 50 Tubing

Polymer Name: Silicone Elastomer

Physical Form: Tube

Features: Hydrophobic, Excellent Flexibility, Good Thermal Stability, Easily Sterilized, High Resilience, Consistent Performance, Low Emissions, Complete Traceability, Low Extractables, Rigorous Change Control

End Uses: Tubing, Medical/Healthcare Applications, Medical Devices

Tensile Strength: 90.0 - 90.0 MPa

Liveo™ Pharma 50 Tubing is Pharmaceutical grade silicone tubing for transferring of ultra-pure liquids, air or steam in pharmaceutical and biotechnological manufacturing processes. Designed for applications that require the transfer of high purity fluids where contamination is a concern like filling lines.

Delrin® 100st Bk602 product card banner

DuPont

Delrin® 100ST BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1100.0 - 1100.0 MPa

Delrin® 100ST BK602 is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.

Delrin® 500t Nc010 product card banner

DuPont

Delrin® 500T NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2100.0 - 2100.0 MPa

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Hytrel® 4069 product card banner

DuPont

Hytrel® 4069

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Hoses, Belts/Belt Repair, Cosmetic Packaging, Appliances, Automotive Applications, Corrugated Pipe, Film, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 45.0 - 45.0 MPa

Hytrel® 4069 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Crastin® St820 Bk503 product card banner

DuPont

Crastin® ST820 BK503

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding, Extrusion, Coating, Sheet, Plaques & Profiles Extrusion

Flexural Modulus: 1500.0 - 1500.0 MPa

Crastin® ST820 BK503 is an unreinforced, Super Tough polybutylene terephthalate resin for injection molding.

Crastin® Sc193 Nc010 product card banner

DuPont

Crastin® SC193 NC010

Polymer Name: PBT/SAN Alloy

Processing Methods: Injection Molding

Density: 1440.0 - 1440.0 kg/m³

Crastin® SC193 NC010 (Complete Data) is a 30% Glass Reinforced Polybutylene Terephthalate Blend Developed for Healthcare Industry

Hytrel® 4068fg product card banner

DuPont

Hytrel® 4068FG

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Corrugated Pipe, Film, Thermoforming Applications, Tubing, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 47.0 - 47.0 MPa

Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® 100st Nc010 product card banner

DuPont

Delrin® 100ST NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1100.0 - 1100.0 MPa

Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.

Zytel® E51hsb Nc010 product card banner

DuPont

Zytel® E51HSB NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding, Coating

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Zytel® E51HSB NC010 is a high molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion.

Hytrel® G4774 product card banner

DuPont

Hytrel® G4774

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Wire & Cable Applications, Jacketing, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 200.0 - 200.0 %

Flexural Modulus: 111.0 - 111.0 MPa

Hytrel® G4774 is a medium modulus grade with nominal hardness of 47D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications: Hose and tubing, wire and cable jackets, film and sheeting, profiles and molded products. Not suited for light-colored finished products.

Liveo™ Pharma Advanced Pump Tubing product card banner

DuPont

Liveo™ Pharma Advanced Pump Tubing

Polymer Name: Silicone Elastomer

Physical Form: Tube

Features: Contamination Protection, Superior Resiliency, Hydrophobic, Excellent Flexibility, Durable, Tear Resistance, Easily Sterilized, Excellent Filling Accuracy, Consistent Performance, Complete Traceability, Low Extractables, Rigorous Change Control

End Uses: Tubing, Medical/Healthcare Applications, Medical Devices

Tensile Strength: 8.9 - 8.9 MPa

Liveo™ Pharma Advanced Pump Tubing is a Translucent pharmaceutical grade silicone tubing designed for pumping of ultrapure liquids in pharmaceutical and biotechnological manufacturing processes. Made from biomedical grade tear resistant platinum-cured elastomer. Liveo™ Pharma Advanced Pump Tubing used in peristaltic pumps where durability is required. DuPont Advanced Pump Tubing offers up to four times the pump life of standard platinum cure silicone tubing.

Hytrel® 7246hs Nc010 product card banner

DuPont

Hytrel® 7246HS NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 500.0 - 500.0 MPa

Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® 4068 product card banner

DuPont

Hytrel® 4068

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 45.0 - 45.0 MPa

Hytrel® 4068 is a low modulus Hytrel® grade with nominal durometer hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:Molded products, hose and tubing, wire and cable jackets, film and sheeting, belting and seals.

Hytrel® Htr8223 Bk320 product card banner

DuPont

Hytrel® HTR8223 BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Bellows, Cosmetic Packaging, Automotive Applications, Constant Velocity Joint Boots, Containers, Bottles, Automotive Boots, Automotive Drivetrain, Film, Thermoforming Applications, Tubing, Automotive Bellows

Density: 1130.0 - 1130.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 79.0 - 79.0 MPa

Hytrel® HTR8223 BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 42D.Typical applications:Constant velocity joint boots.

Crastin® Sk605 Bk851 product card banner

DuPont

Crastin® SK605 BK851

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding, Extrusion

Fillers Included: Glass Fiber

Flexural Modulus: 9000.0 - 9000.0 MPa

Crastin® SK605 BK851 is a 30% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.

Zytel® Fn718 Bk230a product card banner

DuPont

Zytel® FN718 BK230A

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding, Extrusion

Flexural Modulus: 900.0 - 900.0 MPa

Zytel® FN718 BK230A is a flexible polyamide 66 resin.

Hytrel® Sc969 Nc010 product card banner

DuPont

Hytrel® SC969 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Pumps, Drug Delivery Pens, Wound Dressings, Prosthetics, Medical/Healthcare Applications, Fluid Handling, Valves, Surgical Instruments

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® SC969 NC010 is a medium modulus grade with nominal hardness of 63D, contains a non-discoloring stabilizer and can be processed by various thermoplastic processing techniques. Developed for applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Zytel® Sc310 Nc010 product card banner

DuPont

Zytel® SC310 NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Zytel® SC310 NC010 is a lubricated polyamide 66 resin for injection molding. It has been developed for consideration into applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Delrin® Pc652 Nc010 product card banner

DuPont

Delrin® PC652 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® PC652 is a medium viscosity acetal homopolymer, with an advanced system of lubricants. It is developed for parts requiring low wear, low friction and low squeak noise for the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and US FDA drug and device master files (DMF and MAF) have been established.

Hytrel® Htr8206 product card banner

DuPont

Hytrel® HTR8206

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding

End Uses: Film, Appliances, Sporting Goods, Tubing, Office Automation Equipment

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 80.0 - 80.0 MPa

Hytrel® HTR8206 is a High Performance Polyester Elastomer with High Moisture Vapor Transmission Rate Developed for Extrusion and Injection Molding

Hytrel® Htr8139bk product card banner

DuPont

Hytrel® HTR8139BK

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Blow Molding, Injection Molding

End Uses: Cosmetic Packaging, Film, Thermoforming Applications, Tubing, Automotive Applications, Containers, Bottles

Density: 1150.0 - 1150.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® HTR8139BK is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 44D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.Typical applications:Constant velocity joint boots.

Delrin® Pc690 Nc010 product card banner

DuPont

Delrin® PC690 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® PC690 is a low viscosity acetal homopolymer, developed for thin-walled parts requiring high precision molding in the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and US FDA drug and device master files (DMF and MAF) have been established.

Hytrel® 5555hs product card banner

DuPont

Hytrel® 5555HS

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Wire & Cable Applications

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 195.0 - 195.0 MPa

Hytrel® 5555HS is a medium modulus Hytrel® grade, with nominal durometer hardness of 55D. It is a specially stabilized version of Hytrel® 5556 for superior heat and oil resistance properties.Typical applications:Parts with increased heat-ageing stability and oil and grease resistance such as tubing and hose, wire and cable jackets, film and sheeting, belting. Precautions:Contains a discoloring antioxidant. Not suited for light-colored finished products.

Hytrel® Htr8163hvbk product card banner

DuPont

Hytrel® HTR8163HVBK

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Extrusion, Injection Molding

End Uses: Hoses, Pipes, Tubing, Automotive Applications, Corrugated Pipe, Wire & Cable Applications

Density: 1230.0 - 1230.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 350.0 - 350.0 MPa

Hytrel® HTR8163HVBK is a 65 nom. Shore D, heat stabilized, plasticiser free high performance resin for extrusion; low temperature impact, excellent heat ageing, fatigue and crack propagation resistance; for air brake tubes.

Zytel® E42a Nc010 product card banner

DuPont

Zytel® E42A NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding, Coating

Additives Included: Mold Release Agent

Zytel® E42A NC010 is an Unreinforced High Viscosity Polyamide 66 Developed for Extrusion

Delrin® 500tl Nc010 product card banner

DuPont

Delrin® 500TL NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: PTFE, PTFE Micropowder

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3100.0 - 3100.0 MPa

Delrin® 500TL is a medium viscosity acetal homopolymer containing 1.5% Teflon® PTFE Micropowder lubricant. It is designed for applications requiring reduced wear and friction against steel, itself, or other plastics.

Hytrel® G5544 product card banner

DuPont

Hytrel® G5544

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 290.0 - 290.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® G5544 is a medium modulus grade with nominal hardness of 55D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, profiles, molded and extruded consumer products. Not suited for light-colored finished products.