Company logo

Products

DuPont
Elastomers
Product Families
Thermoplastic Elastomers
Specialty Elastomers
Parts & Shapes
Thermoset Elastomers
373 products found on DuPont in Elastomers .
With TDS
Kalrez® 4079 product card banner

DuPont

Kalrez® 4079

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings

Features: Good Mechanical Properties, High Temperature Resistance, Heat Aging Resistant, Low Compression Set, Good Thermal Stability, Chemical Resistant, General Purpose

End Uses: Semiconductor Applications, Pump Parts, Aircraft Applications

Color: Black

Kalrez® 4079 perfluoroelastomer parts are a low compression set product for general purpose use in O-rings, diaphragms, seals and other parts used in the chemical process and aircraft industries. It is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature cycling effects. A maximum service temperature of 316°C (600°F) is suggested, with short excursions to higher temperatures possible. Kalrez® 4079 is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.

Kalrez® Spectrum™ 6375 product card banner

DuPont

Kalrez® Spectrum™ 6375

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: High Temperature Resistance, Good Thermal Stability, Chemical Resistant

End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools, Semiconductor Applications, Ball Valves, Measurement While Drilling Tools, Valves, Electric Submersible Pump

Color: Black

Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.

Kalrez® Spectrum™ 7075 product card banner

DuPont

Kalrez® Spectrum™ 7075

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: Good Seal Force Retention, High Temperature Resistance, Low Compression Set, Good Thermal Stability, Chemical Resistant

End Uses: Flanges, Semiconductor Applications, Pump Parts, Hot Glue Delivery Nozzle, Valves, Valve Parts

Color: Black

Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.

Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Fuel Tanks, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Wires, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Multiflex® G 60 A 11 Bt 13893 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 60 A 11 BT 13893 Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion, Film Extrusion

Tear Strength: 23.0 - 23.0 kN/m

Strain at Break: 650.0 - 650.0 %

Multiflex® Automotive GT Range can be transformed between 190°C to 230°C. In this temperature range, materials are stable, above, thermal degradation occurs, resulting in yellowing and significant odor emanation. Multiflex® G 60 A 11 BT 13893 is designed for use in injection molding/extrusion

Kalrez® 9100 product card banner

DuPont

Kalrez® 9100

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Excellent Resistance To Plasma Radicals, Low Compression Set, Good Thermal Stability, Good Elastic Recovery, Low Outgassing, Low Metal Content, Good Mechanical Properties

End Uses: Semiconductor Applications, Pump Parts

Color: Amber

Kalrez® 9100 is an amber translucent product targeted specifically for PECVD, ALD, HDPCVD and Conductor (Poly/Metal) Etch applications*. Kalrez® 9100 has been specifically designed for low erosion and ultra-low particle generation in harsh plasma environments. It offers excellent thermal stability, very low outgassing as well as excellent elastic recovery and good mechanical strength properties and is well suited for both static and select dynamic sealing applications*. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for allKalrez® 9100 parts.

Hytrel® 4556 product card banner

DuPont

Hytrel® 4556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Coating

End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® 5556 product card banner

DuPont

Hytrel® 5556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Cast Films, Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.

Hytrel® 3078 product card banner

DuPont

Hytrel® 3078

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Compounding, Calendering, Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Cables, Automotive Applications, Film, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films

Density: 1070.0 - 1070.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 27.0 - 27.0 MPa

Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Cast Films, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Kalrez® 6230 product card banner

DuPont

Kalrez® 6230

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: Black

Kalrez® 6230/6230A* perfluoroelastomer parts are a black product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6230/6230A parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6230/6230A parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability.

Hytrel® 5526 product card banner

DuPont

Hytrel® 5526

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Injection Molding

End Uses: Cosmetic Packaging, Appliances, Thermoforming Applications, Automotive Applications, Electrical/Electronic Applications, Office Automation Equipment, Bearings

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 200.0 - 200.0 MPa

Hytrel® 5526 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It is specially recommended for injection molding applications requiring high flow properties.Typical applications:Seals, packing and gaskets; gears and bearings.

Kalrez® 6221 product card banner

DuPont

Kalrez® 6221

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: White

Kalrez® 6221 perfluoroelastomer parts are a white product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6221 parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez® 6221 parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability. Kalrez® 6221 is available as O-rings. For white custom parts, please refer to Kalrez® LS205 parts.

Kalrez® Spectrum™ 7375 product card banner

DuPont

Kalrez® Spectrum™ 7375

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Compressive Strength, Good Mechanical Properties, Good Retention of Properties

End Uses: Semiconductor Applications, Pump Parts

Color: Black

Kalrez® Spectrum™ 7375 perfluoroelastomer parts are an innovative FFKM product based on a patented crosslinking system for chemical process industry applications where broad chemical and water/steam resistance are needed at elevated temperatures. Kalrez® Spectrum™ 7375 parts exhibit excellent compression set resistance, outstanding physical property retention, and good mechanical strength properties. A maximum application temperature of 300°C is suggested.

Kalrez® Spectrum™ 6380 product card banner

DuPont

Kalrez® Spectrum™ 6380

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Chemical Resistant, Good Mechanical Properties

End Uses: Semiconductor Applications, O Rings

Color: Cream

Kalrez® Spectrum™ 6380 perfluoroelastomers parts are a non-black product developed specifically for chemical processes involving hot, aggressive amines. In addition, it has excellent overall chemical resistance (see chart below). This cream colored product is easily identifiable when selecting an O-ring material for harsh chemical plant services. This material has excellent mechanical properties and is a top choice for both static and dynamic sealing applications. A maximum service temperature of 225°C is suggested while short-term excursions to higher temperatures are permissible.

Liveo™ Biomedical Grade Hcr Q7-4735 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4735

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Enhanced Tear Resistant, Non Blooming, High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency

Tear Strength: 35.0 - 35.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Hytrel® G4074 product card banner

DuPont

Hytrel® G4074

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion

End Uses: Electrical/Electronic Applications, Cast Films, Hoses, General Purpose, Cosmetic Packaging, Appliances, Cables, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Wires, Tubing

Density: 1180.0 - 1180.0 kg/m³

Strain at Break: 250.0 - 250.0 %

Flexural Modulus: 65.0 - 65.0 MPa

Hytrel® G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, mouldedproducts. Not suited for light-colored finished products.

Hytrel® 4056 product card banner

DuPont

Hytrel® 4056

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Compounding, Calendering, Extrusion, Coating

End Uses: Hoses, Cosmetic Packaging, Cables, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Wires, Electrical/Electronic Applications, Office Automation Equipment

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 60.0 - 60.0 MPa

Hytrel® 4056 is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding. Typical Applications Hose and tubing Hose jackets Wire and cable jackets Film and sheeting Belting and seals

Multiflex® A 1004 Bz 4775 N0200 Compounded Rubber In Primary Form product card banner

DuPont

Multiflex® A 1004 BZ 4775 N0200 Compounded Rubber In Primary Form

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion

Tear Strength: 46.0 - 46.0 kN/m

Strain at Break: 550.0 - 550.0 %

Multiflex® A1004 B Z4775 N0200 is designed for use in injection molding/extrusion.

Kalrez® 0090 product card banner

DuPont

Kalrez® 0090

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings, Valve Seats

Features: High Modulus, Durable, Good Thermal Stability, High Hardness, Chemical Resistant

End Uses: Semiconductor Applications, Pump Parts, Valves, O Rings, Valve Parts

Color: Black

Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).

Liveo™ Pharma 50 Tubing product card banner

DuPont

Liveo™ Pharma 50 Tubing

Polymer Name: Silicone Elastomer

Physical Form: Tube

Features: Hydrophobic, Excellent Flexibility, Good Thermal Stability, Easily Sterilized, High Resilience, Consistent Performance, Low Emissions, Complete Traceability, Low Extractables, Rigorous Change Control

End Uses: Tubing, Medical/Healthcare Applications, Medical Devices

Tensile Strength: 90.0 - 90.0 MPa

Liveo™ Pharma 50 Tubing is Pharmaceutical grade silicone tubing for transferring of ultra-pure liquids, air or steam in pharmaceutical and biotechnological manufacturing processes. Designed for applications that require the transfer of high purity fluids where contamination is a concern like filling lines.

Liveo™ Class Vi Elastomers C6-180 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-180 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135. C6-150, C6-165. C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Multiflex® G 10 A 41 15057 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 10 A 41 15057 Thermoplastic Elastomer

Polymer Name: Thermoplastic Elastomer (unspecified)

Processing Methods: Injection Molding, Extrusion

Density: 870.0 - 870.0 kg/m³

Tear Strength: 8.0 - 8.0 kN/m

Multiflex® G 10 A 41 15057 is designed for use in injection molding/extrusion

Kalrez® 9500 product card banner

DuPont

Kalrez® 9500

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Ozone Resistant, Good Thermal Stability, Low Outgassing, Low Metal Content, Good Mechanical Properties, Low Erosion

End Uses: Semiconductor Applications, Pump Parts

Color: Tan

Kalrez® 9500 perfluoroelastomer parts are a tan product targeted specifically for deposition processes where ozone, ammonia and water vapor are used for processing, e.g. SACVD, FCVD, PECVD curing processes, etc. It has been specifically designed for use in applications where the plasma environment is more chemical, i.e., where oxygen and fluorine radicals are more dominant.

Kalrez® 8900 product card banner

DuPont

Kalrez® 8900

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: O-rings, Seals

Features: Fluorine Gas Resistant, Low Moisture Content, Excellent Resistance To Plasma Radicals, Low Compression Set, Good Thermal Stability, Low Outgassing

End Uses: Semiconductor Applications, O Rings

Color: Black

Kalrez® 8900 perfluoroelastomer parts are a black product for oxidation, diffusion, ALD, and LPCVD applications. It offers outstanding thermal stability, very low outgassing and excellent (low) compression set properties. Kalrez® 8900 parts exhibit excellent retention of physical properties at elevated temperatures, have excellent mechanical strength and are well-suited for both static and dynamic sealing applications. A maximum application temperature of 325°C (617°F) is suggested. Short excursions to higher temperatures may also be possible. Ultrapure post-cleaning and packaging is_x005F standard for all Kalrez® 8900 parts. _x005F

Liveo™ Class Vi Elastomers C6-150 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-150 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Hytrel® 5553fg Nc010 product card banner

DuPont

Hytrel® 5553FG NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Extrusion, Film Extrusion, Thermoforming, Casting, Injection Molding, Coating

End Uses: Cosmetic Packaging, Appliances, Non Specific Food Applications, Thermoforming Applications

Density: 1200.0 - 1200.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® 5553FG NC010 is a high performance thermoplastic polyester elastomer developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Multiflex® G 62 A 21 B Z1631 N0052 (A) Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 62 A 21 B Z1631 N0052 (A) Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion, Film Extrusion

Tear Strength: 37.0 - 37.0 kN/m

Strain at Break: 550.0 - 550.0 %

Compression Set (70 °C): 33.0 - 33.0 %

Multiflex® brand TES Automotive G Range are styrenics thermoplastic elastomers, designed for medium/high compression set applications. Compatibility with polyolefin enables bi-material parts (continuous process or cold insert).

Multiflex® Tpo 4203 Si1 Black 27522 Thermoplastic Elastomer product card banner

DuPont

Multiflex® TPO 4203 SI1 Black 27522 Thermoplastic Elastomer

Polymer Name: Thermoplastic Polyolefin (TPO)

Processing Methods: Injection Molding

Features: Paintable

Density: 890.0 - 890.0 kg/m³

Strain at Break: 125.0 - 125.0 %

Flexural Modulus: 460.0 - 460.0 MPa

Multiflex® TPO 4203 Sl1 Black 27522 is designed for injected molded, paintable airbag covers and inflatable-restraint components

Kalrez® 8575 product card banner

DuPont

Kalrez® 8575

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings, Valve Seats

Features: Good Elastic Recovery, Low Outgassing, Good Mechanical Properties, Long Seal Life, Low Compression Set, Good Thermal Stability, Less Infrared Absorption

End Uses: Valve Parts, Semiconductor Applications, Valves

Color: White

Kalrez® 8575 perfluoroelastomer parts are a white product for oxidation, diffusion, lamp anneal and RTP sealing applications. Kalrez® 8575 exhibits excellent thermal stability and long-term sealing performance, less Infrared (IR) absorption and significantly reduced outgassing properties at elevated temperatures. It also has good mechanical properties and is well-suited for both static and low stress/low sealing force applications. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for all 8575 parts._x005F

Kalrez® Spectrum™ 7090 product card banner

DuPont

Kalrez® Spectrum™ 7090

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: High Modulus, Good Thermal Stability, High Hardness, Good Compressive Strength, Chemical Resistant, Good Mechanical Properties, Good Seal Force Retention

End Uses: Semiconductor Applications, Pump Parts

Color: Black

Kalrez® Spectrum™ 7090 perfluoroelastomer parts are specifically targeted for use in applications requiring high hardness/higher modulus properties. These specialty black parts have excellent mechanical properties including compression set resistance, seal force retention, response to temperature cycling effects and rapid gas decompression resistance. Kalrez® Spectrum™ 7090 perfluoroelastomer parts are well suited for both static and dynamic sealing applications, especially applications that require extrusion resistance at higher temperatures. They also offer outstanding thermal stability and chemical resistance. A maximum service temperature of 325°C (617°F) is suggested. Short excursions to higher temperatures may also be possible.

Multiflex® A 1004 65a 520 Fxt 16780 S product card banner

DuPont

Multiflex® A 1004 65A 520 FXT 16780 S

Polymer Name: Thermoplastic Elastomer (unspecified)

Processing Methods: Injection Molding, Extrusion

End Uses: Automotive Applications

Density: 1040.0 - 1040.0 kg/m³

Tear Strength: 37.0 - 37.0 kN/m

Multiflex® A1004 65A 520 FXT 16780S is designed for use in injection molding/extrusion.

Hytrel® 4069 product card banner

DuPont

Hytrel® 4069

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Cast Films, Hoses, Belts/Belt Repair, Cosmetic Packaging, Appliances, Cables, Automotive Applications, Corrugated Pipe, Film, Sporting Goods, Thermoforming Applications, Wires, Tubing, Office Automation Equipment

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 45.0 - 45.0 MPa

Hytrel® 4069 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® 4068fg product card banner

DuPont

Hytrel® 4068FG

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Cables, Corrugated Pipe, Film, Thermoforming Applications, Wires, Tubing

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 47.0 - 47.0 MPa

Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Liveo™ 7-9600 Soft Filling Elastomer Parts A & B product card banner

DuPont

Liveo™ 7-9600 Soft Filling Elastomer Parts A & B

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices

Features: Pigmentable, Low Viscosity, Good Processability, Solventless, Good Colorability

Soft silicone elastomer for producing cohesive and soft feeling medical device parts.