Search:
Thermoplastic Elastomers
314 products found on DuPont DuPont products found for View all Thermoplastic Elastomerson Knowde
Product Families
Styrenic Thermoplastic Elastomers (TPE-S)
Thermoplastic Polyester Elastomers (TPE-E)
Thermoplastic Vulcanizates (TPV)
Thermoplastic Olefin Elastomers (TPO)
Other Thermoplastic Elastomers
With TDS
Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Multiflex® G 60 A 11 Bt 13893 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 60 A 11 BT 13893 Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion, Film Extrusion

Tear Strength: 23.0 - 23.0 kN/m

Strain at Break: 650.0 - 650.0 %

Multiflex® Automotive GT Range can be transformed between 190°C to 230°C. In this temperature range, materials are stable, above, thermal degradation occurs, resulting in yellowing and significant odor emanation. Multiflex® G 60 A 11 BT 13893 is designed for use in injection molding/extrusion

Hytrel® 4556 product card banner

DuPont

Hytrel® 4556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® 5556 product card banner

DuPont

Hytrel® 5556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.

Hytrel® 3078 product card banner

DuPont

Hytrel® 3078

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1070.0 - 1070.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 27.0 - 27.0 MPa

Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Hytrel® 5526 product card banner

DuPont

Hytrel® 5526

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Injection Molding

End Uses: Cosmetic Packaging, Appliances, Thermoforming Applications, Automotive Applications, Electrical/Electronic Applications, Office Automation Equipment, Bearings

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 200.0 - 200.0 MPa

Hytrel® 5526 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It is specially recommended for injection molding applications requiring high flow properties.Typical applications:Seals, packing and gaskets; gears and bearings.

Multiflex® Tes A6007 Sp1 Gre N106012c Thermoplastic Elastomer product card banner

DuPont

Multiflex® TES A6007 SP1 GRE N106012C Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding

Tear Strength: 26.0 - 26.0 kN/m

Multiflex® TES A6007 SPI GRE N0106012C is designed for use in injection molding

Multiflex® Tes A7512 Ev0 Fxt Thermoplastic Elastomer product card banner

DuPont

Multiflex® TES A7512 EV0 FXT Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding

Tear Strength: 36.0 - 36.0 kN/m

Multiflex® TES A7512 EV0 FXT is designed for use in injection molding

Hytrel® G4074 product card banner

DuPont

Hytrel® G4074

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Electrical/Electronic Applications, Cast Films, Wire & Cable Applications, Hoses, General Purpose, Cosmetic Packaging, Appliances, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing

Density: 1180.0 - 1180.0 kg/m³

Strain at Break: 250.0 - 250.0 %

Flexural Modulus: 65.0 - 65.0 MPa

Hytrel® G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, mouldedproducts. Not suited for light-colored finished products.

Hytrel® 4056 product card banner

DuPont

Hytrel® 4056

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment, Wire & Cable Applications, Hoses

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 60.0 - 60.0 MPa

Hytrel® 4056 is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, beltingand seals,.

Multiflex® A 1004 Bz 4775 N0200 Compounded Rubber In Primary Form product card banner

DuPont

Multiflex® A 1004 BZ 4775 N0200 Compounded Rubber In Primary Form

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion

Tear Strength: 46.0 - 46.0 kN/m

Strain at Break: 550.0 - 550.0 %

Multiflex® A1004 B Z4775 N0200 is designed for use in injection molding/extrusion.

Multiflex® G 10 A 41 15057 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 10 A 41 15057 Thermoplastic Elastomer

Polymer Name: Thermoplastic Elastomer (unspecified)

Processing Methods: Injection Molding, Extrusion

Density: 870.0 - 870.0 kg/m³

Tear Strength: 8.0 - 8.0 kN/m

Multiflex® G 10 A 41 15057 is designed for use in injection molding/extrusion

Hytrel® 5553fg Nc010 product card banner

DuPont

Hytrel® 5553FG NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Extrusion, Film Extrusion, Thermoforming, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding

End Uses: Cosmetic Packaging, Appliances, Non Specific Food Applications, Thermoforming Applications

Density: 1200.0 - 1200.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® 5553FG NC010 is a high performance thermoplastic polyester elastomer developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Multiflex® G 62 A 21 B Z1631 N0052 (A) Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 62 A 21 B Z1631 N0052 (A) Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion, Film Extrusion

Tear Strength: 37.0 - 37.0 kN/m

Strain at Break: 550.0 - 550.0 %

Compression Set (70 °C): 33.0 - 33.0 %

Multiflex® brand TES Automotive G Range are styrenics thermoplastic elastomers, designed for medium/high compression set applications. Compatibility with polyolefin enables bi-material parts (continuous process or cold insert).

Multiflex® Tpo 4203 Si1 Black 27522 Thermoplastic Elastomer product card banner

DuPont

Multiflex® TPO 4203 SI1 Black 27522 Thermoplastic Elastomer

Polymer Name: Thermoplastic Polyolefin (TPO)

Processing Methods: Injection Molding

Features: Paintable

Density: 890.0 - 890.0 kg/m³

Strain at Break: 125.0 - 125.0 %

Flexural Modulus: 460.0 - 460.0 MPa

Multiflex® TPO 4203 Sl1 Black 27522 is designed for injected molded, paintable airbag covers and inflatable-restraint components

Multiflex® A 1004 65a 520 Fxt 16780 S product card banner

DuPont

Multiflex® A 1004 65A 520 FXT 16780 S

Polymer Name: Thermoplastic Elastomer (unspecified)

Processing Methods: Injection Molding, Extrusion

End Uses: Automotive Applications

Density: 1040.0 - 1040.0 kg/m³

Tear Strength: 37.0 - 37.0 kN/m

Multiflex® A1004 65A 520 FXT 16780S is designed for use in injection molding/extrusion.

Hytrel® 4069 product card banner

DuPont

Hytrel® 4069

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Hoses, Belts/Belt Repair, Cosmetic Packaging, Appliances, Automotive Applications, Corrugated Pipe, Film, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 45.0 - 45.0 MPa

Hytrel® 4069 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® 4068fg product card banner

DuPont

Hytrel® 4068FG

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Corrugated Pipe, Film, Thermoforming Applications, Tubing, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 47.0 - 47.0 MPa

Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Hytrel® G3548 Nc010 product card banner

DuPont

Hytrel® G3548 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Injection Molding, Extrusion

End Uses: Appliances, Automotive Applications, Film, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1150.0 - 1150.0 kg/m³

Strain at Break: 190.0 - 190.0 %

Flexural Modulus: 25.0 - 25.0 MPa

Hytrel® G3548 is a low modulus grade with nominal hardness of 35D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Multiflex® G 55 A 11 B Z1751 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 55 A 11 B Z1751 Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion

Tear Strength: 24.0 - 24.0 kN/m

Multiflex® brand G are styrenics thermoplastic elastomers, designed for medium/high compression set applications. Compatibility with polyolefin enables bi-material parts (continuous process or cold insert).

Multiflex® G60 A 21 Bt Z3519n0104a product card banner

DuPont

Multiflex® G60 A 21 BT Z3519N0104A

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Extrusion, Film Extrusion, Injection Molding

Additives Included: UV Stabilizer

Tear Strength: 27.0 - 27.0 kN/m

Strain at Break: 300.0 - 300.0 %

Compression Set (70 °C): 26.0 - 26.0 %

Multiflex® A 1004 65a 520 Fxt 16780 product card banner

DuPont

Multiflex® A 1004 65A 520 FXT 16780

Polymer Name: Thermoplastic Elastomer (unspecified)

Processing Methods: Injection Molding, Extrusion

End Uses: Automotive Applications

Density: 1020.0 - 1020.0 kg/m³

Tear Strength: 31.0 - 31.0 kN/m

Multiflex® A 1004 65A 520 FXT 16780 is designed for injected molded, unpainted airbag covers and inflatable-restraint components.

Hytrel® 60lw product card banner

DuPont

Hytrel® 60LW

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Resin Transfer Molding, Casting, Injection Molding, Compounding, Calendering, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment

Hytrel® 60LW is a Polyester Elastomer Concentrate Developed for Enhancing Abrasion and Wear Resistance

Hytrel® G4774 product card banner

DuPont

Hytrel® G4774

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Wire & Cable Applications, Jacketing, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 200.0 - 200.0 %

Flexural Modulus: 111.0 - 111.0 MPa

Hytrel® G4774 is a medium modulus grade with nominal hardness of 47D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications: Hose and tubing, wire and cable jackets, film and sheeting, profiles and molded products. Not suited for light-colored finished products.

Hytrel® 7246hs Nc010 product card banner

DuPont

Hytrel® 7246HS NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 500.0 - 500.0 MPa

Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® 4068 product card banner

DuPont

Hytrel® 4068

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 45.0 - 45.0 MPa

Hytrel® 4068 is a low modulus Hytrel® grade with nominal durometer hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:Molded products, hose and tubing, wire and cable jackets, film and sheeting, belting and seals.

Tpsiv® 4000-75a Sr product card banner

DuPont

TPSiV® 4000-75A SR

Polymer Name: Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR by DuPont is comprised of Thermoplastic Vulcanizate. It is commonly used It is available in Pellets form.

Multiflex® Tpo 4404 Si1 Black 28164 Thermoplastic Elastomer product card banner

DuPont

Multiflex® TPO 4404 SI1 Black 28164 Thermoplastic Elastomer

Polymer Name: Thermoplastic Polyolefin (TPO)

Processing Methods: Injection Molding

Features: Paintable

Density: 890.0 - 890.0 kg/m³

Strain at Break: 170.0 - 170.0 %

Flexural Modulus: 440.0 - 440.0 MPa

Multiflex® TPO 4404 SI1 Black 28164 is designed for injected molded, paintable airbag covers and inflatable-restraint components

Multiflex® Tes 2403 Si1 Natural Thermoplastic Elastomer product card banner

DuPont

Multiflex® TES 2403 SI1 Natural Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding

Tear Strength: 75.0 - 75.0 kN/m

Strain at Break: 250.0 - 250.0 %

Multiflex® TES 2403 SI1 NAT is designed for injected molded, paintable airbag covers and inflatable-restraint components.

Multiflex® G 75 A 520 product card banner

DuPont

Multiflex® G 75 A 520

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion, Film Extrusion

Tear Strength: 35.0 - 35.0 kN/m

Strain at Break: 730.0 - 730.0 %

Multiflex® G 75 A 520 by DuPont is comprised of Styrenic Thermoplastic Elastomer. It is commonly used It is a Silicone-free It is available in Pellets form.

Multiflex® A 6221 Cuv 848 Black Thermoplastic Elastomer product card banner

DuPont

Multiflex® A 6221 CUV 848 Black Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Film Extrusion

Tear Strength: 18.0 - 18.0 kN/m

Strain at Break: 750.0 - 750.0 %

Compression Set (70 °C): 65.0 - 65.0 %

Multiflex® A 6221 CUV 848 Black Thermoplastic Elastomer by DuPont is comprised of Styrenic Thermoplastic Elastomer. It is commonly used It is available in Pellets form.

Tpsiv® 3345-65a Natural 25564 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A Natural 25564 Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Multiflex® Tes 2403 Si1 Natural 27836 Thermoplastic Elastomer product card banner

DuPont

Multiflex® TES 2403 SI1 Natural 27836 Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding

Tear Strength: 76.0 - 76.0 kN/m

Strain at Break: 210.0 - 210.0 %

Multiflex® TES 2403 SI1 NAT 27836 is designed for injected molded, paintable airbag covers and inflatable-restraint components.

Multiflex® G 75 A 520 205/09 10779 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 75 A 520 205/09 10779 Thermoplastic Elastomer

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion

Tear Strength: 35.0 - 35.0 kN/m

Multiflex® brand TES Automotive G Range are styrenics thermoplastic elastomers, designed for medium/high compression set applications. Compatibility with polyolefin enables bi-material parts (continuous process or cold insert).