

DuPont
BETASEAL® 16100H
Ready to Use Product Type: Primer, 1K (1 component) Coating, Solventborne Coating
Compatible Substrates & Surfaces: Glass
Features: Improved Adhesion
Chemical Family: Silanes
BETASEAL® 16100H is a solvent-based silane blend type primer. BETASEAL® 16100H is a clear, one-step primer used to promote adhesion to glass and used in conjunction with an approved polyurethane adhesive
DuPont
BETAPRIME® 5405 UV
Ready to Use Product Type: Primer
Compatible Substrates & Surfaces: Polyolefins, Painted Surfaces, Plastics
Features: Improved Adhesion
Chemical Family: Polyisocyanates
BETAPRIME® 54051JV is a primer containing UV trace with short and long open time. Compatibility with pretreated polyolefins and SMC substrates.
DuPont
BETAMATE® 1480P
Ready to Use Product Type: Epoxy Adhesive, Structural Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Aluminum, Metal, Steel, Galvanized Steel
Cure Method: Heat Cure
Application Method: Electrodeposition, E-Coat
Chemical Family: Epoxy & Epoxy Derivatives
BETAMATE® 1480P is a one-component, heat-curing, epoxy-based structural adhesive developed especially for body shop applications. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 1480P has excellent adhesion to automotive steels (include coated steels and pretreated aluminum with good tolerance to oily and dry lubes). BETAMATE® 1480P helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining technique, compatible with the e-coat process and wash-off resistance. Typical applications include bonding of the vehicle body structure and closure hem flange applications.


DuPont
BETASEAL® Xpress 30
Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive
BETASEAL® Xpress30 is a single component, high modulus non-conductive adhesive with Reinforced Polyisotropic Micro-network (RPM) technology for high initial green strength that enables rapid crosslinking to speed bonding, allowing faster minimum drive-away times. BETASEAL® Xpress30 is a cold applied, high modulus and non-conductive (enhances vehicle's structural integrity / passenger comfort with reduced road noise, while reducing GPS / phone / HUD / defroster connection interference). BETASEAL® Xpress30 has industry-leading ease of use application, tooling, decking performance, short cut-off string, crash proven 30 minute minimum drive-away time down to 0°F.


DuPont
BETATECH™ 2029
Ready to Use Product Type: Conductive Adhesive, 2K (2 component) Adhesive
Application Areas: Batteries
Chemical Family: Polyurethanes (PU)
BETATECH™ 2029 is a two component thermal interface material based on a polyurethane technology with a very high thermal conductivity. BETATECH™ 2029 is based on aluminum trihydroxide fillers that lead to a very high thermal conductivity accompanied by a low density. The material can be efficiently applied and the parts can be joined quickly due to a low press-in force. The material is free of silicones.
DuPont
MOLYKOTE® 165 LT Grease
Ready to Use Product Type: Lubricant, Grease
Application Area: Gears
Compatible Substrates & Surfaces: Metal
Features: Corrosion Resistant, Good Adhesion, Effective Load Builder, Wear Resistant
Thickener Type: Lithium Complex
MOLYKOTE® 165 LT Gearwheel Grease for the lubrication of highly stressed open gears and reducing gears made of metal, with a peripheral speed of up to 2.5 m/s. Open gears that are subjected to high stresses and bad weather effects. Successfully used in crushing plants and in transmission gears and threaded spindles of heavy, crank-driven presses.


DuPont
THIXON® P-11-EF
Ready to Use Product Type: 1K (1 component) Adhesive, Primer
Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Steel, Stainless Steel, Aluminum
THIXON® P-11-EF is a vulcanizing adhesive primer used with all MEGUM® or THIXON® cover coat adhesives for bondingmost elastomers to various substrates. It can also be used as a one coat for bonding polar elastomers and will bondmetal substrates including hot and cold rolled steel, stainless steel alloys, brass, aluminum and zinc plated metals. It is a very good general use primer coat for rubber to metal applications. Providing excellent boiling water and salt spray resistance.
DuPont
BETAPRIME® 5433
Ready to Use Product Type: Primer
Compatible Substrates & Surfaces: Polycarbonate (PC), Plastics
Features: Improved Adhesion
Chemical Family: Sulfur-based Compounds
BETAPRIME® 5433 is an adhesion-promoting primer for painted and plastic substrates with short and long open time. It is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.


DuPont
THIXON® OSN-2-EF
Ready to Use Product Type: 2K (2 component) Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Brass, Elastomers & Rubbers, Aluminum, Metal, Steel, Polyamide, Plastics
THIXON® OSN-2-EF is a general purpose one-coat adhesive used for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals._x005F THIXON® OSN-2-EF bonds Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF is also used for post-vulcanization bonding. In addition, THIXON® OSN-2-EF bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance, however THIXON® OSN-2-EF does quite well as a stand alone coating in many general rubber to metal bonding situations.


DuPont
THIXON® 715-EF&B
Ready to Use Product Type: 1K (1 component) Adhesive, 2K (2 component) Adhesive
Compatible Substrates & Surfaces: Metal, Plastics, Polyurethane, Elastomers & Rubbers, Acrylic
THIXON® 715-EF&B by DuPont is commonly used as Bonding Adhesive for a variety of applications in Industrial and Automotive.
DuPont
BETASEAL® 1766 EU
Ready to Use Product Type: Solvent free (100% Solids) Adhesive, Structural Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Painted Surfaces, Glass
Cure Method: Moisture Cure
Application Method: Pneumatic Gun
Chemical Family: Polyurethanes (PU)
BETASEAL® 1766 EU is a high viscosity, high modulus, glass bonding adhesive that can be used primerless to paint and glass. Due to its chemistry, it delivers a high initial handling strength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.


DuPont
THIXON® 2001-EF
Ready to Use Product Type: 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Elastomers & Rubbers, Polyolefins, Metal, Plastics
Application Method: Roll Coater, Brush
THIXON® 2001-EF is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system applied cover THIXON® P-11-EF or THIXON® P-6-EF adhesive primers. It bonds with a wide variety of elastomers, including natural rubber, SBR, chloroprene, EPDM, butyl and nitrile.THIXON® 2001-EF is formulated at the proper viscosity and solids content to give the desired dry film thickness for maximum bonding in one coat brushing or roller coat applications. It is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system applied over THIXON® P-11-EF or P-6-EF adhesive primers. THIXON® 2001-EF represents the highest reactivity of any of the cover coat adhesives in our product line and is used to pick up difficult to bond rubber compounds
DuPont
THIXON® 423 Clear
Ready to Use Product Type: 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Metal, Plastics, Epoxies, Polyurethane, Polyesters
THIXON® 423 Clear is a vulcanizing adhesive which can be used as a one-coat adhesive or as a covercoat adhesive over THIXON®403/404 adhesive primer for bonding castable polyurethane to various substrates.THIXON®423 can also be used as a one-coat adhesive for bonding thermoplastic polyurethanes to metal. THIXON®423 can also be used as a protective coating for metal, polyurethane, epoxy, polyester and fiberglass compounds. It is a good one-coat system for thermoplastic urethane to metal bonding with better heat resistance that THIXON® 405.
DuPont
MOLYKOTE® 7 Release Compound
Ready to Use Product Type: Industrial Lubricants
Compatible Substrates & Surfaces: Elastomers & Rubbers, Plastics
Features: Wide Temperature Operating Range, Food Contact Acceptable, Electrically Insulating, Excellent Moisture Resistance, Oxidation Resistant
Chemical Family: Silicones
MOLYKOTE® 7 Release compound is a Dimethyl silicone compound for a variety of lubrication and protection applications. It can be used in applications including mold release agent for foundry shell and core molds. Break-in treatment for bladders on tire presses, rubber lubricant and preservative. Release agent for adhesives and glues. Cable pulling lubricant to draw rubber-covered cable through conduit. Release agent for plastic extruders and processing equipment and release agent for plastic film packaging machines.
DuPont
BETAMATE® 6120
Ready to Use Product Type: Epoxy Adhesive, Structural Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Aluminum, Metal, Steel
Cure Method: Heat Cure
Chemical Family: Epoxy & Epoxy Derivatives
BETAMATE® 6120 is a one-component, heat-curing, epoxy-based adhesive developed especially for body shop applications. It has excellent adhesion for metal substrate (aluminum and steel) applications. BETAMATE® 6120 has excellent adhesion for aluminum bonding with excellent stress durability, high sag resistance, high wash off resistance and exceptionally high -40°C peel strength. Typical applications include bonding of the vehicle body structure and closure hem flange applications.


DuPont
BETASEAL® 8000-1F
Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Glass
Cure Method: Moisture Cure
Chemical Family: Polyurethanes (PU)
BETASEAL® 8000-1F is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F _x005F BETASEAL® 8000-1F is a cold processable, medium viscosity, low modulus adhesive with excellent UV stability attributes. It is primerless to paint on automotive paints.


DuPont
Liveo™ 365 35% Dimethicone NF Emulsion
Ready to Use Product Type: Lubricant
Application Areas: Medical Devices
Compatible Substrates & Surfaces: Polyolefins, Acrylic, Metal, Polyurethane, Polyamide, Polycarbonate (PC), Glass, Silicone, Elastomers & Rubbers, Polyvinyl Chloride (PVC), Fluoroelastomer, Plastics, Polystyrene (PS)
Features: Good Release Properties, Good Wettability, Low Wear, Excellent Lubricity, Low Friction
Chemical Family: Silicones
Liveo™ 365 35% Dimethicone NF Emulsion is a water-dilutable emulsion containing nonionic emulsifiers and 35% National Formulary Dimethicone. The emulsion is not manufactured or tested to be pyrogen free. Liveo™ 365 35% Dimethicone NF Emulsion may be used in a variety of applications where it is beneficial to dispense a lubricating silicone fluid in a water-dilutable delivery system.
DuPont
THIXON® P-11
Ready to Use Product Type: 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Polyesters, Elastomers & Rubbers, Acrylic, Polyamide, Metal, Plastics
THIXON® P-11 is a solvent-based primer, used in combination with MEGUM® or THIXON® cover coats. THIXON® P-11 can also be used as a one-coat adhesive for the bonding of polar elastomers (NBR, AEM, ACM). COMPOSITION: THIXON® P-11 consists of reactive polymers and pigments in methyl isobutyl ketone (MIBK). It is formulated without reportable levels of lead or other toxic heavy metals. ENVIRONMENTAL RESISTANCE: Rubber-to-metal bonding systems using THIXON® P-11 display resistance to severe environmental exposures such as humidity and corrosion. Properly prepared bonds will also resist heat, salt fog, oil and water exposures.
DuPont
MOLYKOTE® SH 44 MT Grease
Ready to Use Product Type: Grease
Application Area: Chain Conveyors, Kilns, Bearings
Compatible Substrates & Surfaces: Elastomers & Rubbers
Features: Oxidation Resistant, Corrosion Resistant, Wide Temperature Operating Range, Excellent Lubricity, Low Evaporation, High Temperature Resistance
Chemical Family: Silicones, Lithium Complexes
Thickener Type: Lithium Complex
MOLYKOTE® SH 44 MT Grease is high-temperature silicone grease for bearings.
DuPont
MOLYKOTE® 111 Compound
Chemical Family: Silicones
Ready to Use Product Type: Sealer
Application Area: Electrical Components, Valves, Gaskets, Seals
Application Method: Spray, Brush, Dip Coating, Wipe
Compatible Substrates & Surfaces: Plastics, Elastomers & Rubbers
MOLYKOTE® 111 Compound is used as a valve lubricant and sealant.


DuPont
Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B)
Ready to Use Product Type: Solvent free (100% Solids) Adhesive, 2K (2 component) Adhesive
Chemical Family: Silicones
Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B) is a soft elastomeric silicone adhesive for adhering medical devices to the skin with medium adhesion force and gentle removal.
DuPont
MOLYKOTE® Longterm 1 Plus Extreme Pressure Bearing Grease
Ready to Use Product Type: Grease
Application Area: Bearings
Features: Corrosion Resistant, Extreme Pressure Performance, Oxidation Resistant
Chemical Family: Lithium Soaps, Mineral Oils
Thickener Type: Lithium Complex
MOLYKOTE® Longterm 1 Plus Extreme Pressure Bearing Grease is a Lubricating grease for metal/metal combinations with slow to medium-fast movements, especially with high loads. Used successfully for journal bearings in sugar mills.
DuPont
BETASEAL® 1758-1F
Ready to Use Product Type: Structural Adhesive, Solvent free (100% Solids) Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Glass
Cure Method: Moisture Cure
Chemical Family: Polyurethanes (PU)
BETASEAL® 1758-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F BETASEAL® 1758-1F is a warm and cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint. Warm application of BETASEAL® 1758-1F delivers a medium initial handling strength to hold the position of the bonded parts.
DuPont
MOLYKOTE® G-1023 Grease
Ready to Use Product Type: Grease
Application Area: Slideways, Slides, Machine Parts
Compatible Substrates & Surfaces: Metal, Plastics
Features: Corrosion Resistant, Sound Damping, Low Friction
Thickener Type: Lithium Complex
MOLYKOTE® G-1023 is PAO grease for plastic/metal parts lubrication. It is used in Slides for automotive parts
DuPont
BETAPRIME® 5402
Ready to Use Product Type: Primer
Compatible Substrates & Surfaces: Plastics
Features: Improved Adhesion
BETAPRIME® 5402 is an adhesion-promoting primer for painted and plastic substrates with short open time. BETAPRIME® 5402 is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.
DuPont
BETASEAL® 1815-1F
Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Glass
Cure Method: Moisture Cure
Chemical Family: Polyurethanes (PU)
BETASEAL® 1815-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 1815-1F is a warm and cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint. Warm application of BETASEAL® 1815-1F delivers a medium initial handling strength to hold the position of the bonded parts.
DuPont
THIXON® 6110F
Ready to Use Product Type: 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Wood, Glass, Metal
THIXON® 6110F is a vulcanizing adhesive used to thermally laminate polypropylene copolymers to substrates such as metal, glass and wood. This product is a one-part dispersion and must be mixed well before and during use. Cohesive failure bonds are typical for most polypropylene copolymer materials.
DuPont
THIXON® 511-EF
Ready to Use Product Type: 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Elastomers & Rubbers, Polyolefins, Metal, Plastics
THIXON® 511-EF is a vulcanizing cover coat adhesive used with THIXON® or MEGUM® adhesive primers for bondingnatural rubber, SBR, EPDM, chloroprene, chlorosulfonated-polyethylene, butyl, and nitrile rubbers. It is formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone depleting chemicals.THIXON® 511-EF can also be used as a splice adhesive for bonding uncured rubber compounds to previously cured rubbers, and as an intermediate adhesive with a tie coat adhesive for open steam or autoclave curing tank linings. It is agood long-standing cover coat adhesive that has been used in very demanding application in building, automotive andi ndustrial applications. Along with the appropriate THIXON® OR MEGUM® Primers, this system will provide robust performance on an economical basis.
DuPont
MOLYKOTE® D-321 R Anti-Friction Coating
Ready to Use Product Type: Dry Lubricants
Application Area: Automotive Engine
Compatible Substrates & Surfaces: Metal
Features: Fast Cure, Anti-Slip, Improved Ageing Resistance, Friction Reduction
MOLYKOTE® D-321 R Anti-Friction Coating is an air-curing dry lubricant.
DuPont
MOLYKOTE® AS-880N Grease
Ready to Use Product Type: Grease
Application Area: Slides
Compatible Substrates & Surfaces: Metal
Features: Wide Temperature Operating Range, Sound Damping, Excellent Compatibility, Excellent Water Resistance
Chemical Family: Silicones
Thickener Type: Silica
MOLYKOTE® AS-880N is Grease Silicone oil/silica-thickened light-consistency grease containing specially formulated solid lubricants. MOLYKOTE® AS-880N Grease is designed to lubricate between metal/metal and metal/plastic components in disk brake systems. It is commonly applied between the brake pad and brake shim(s) to reduce and prevent squeal noise that occurs during braking.
DuPont
MOLYKOTE® G-4501 FM Multi-Purpose Synthetic Grease
Ready to Use Product Type: Grease
Application Area: Cams, Bearings, Machine Parts, Guides
Compatible Substrates & Surfaces: Elastomers & Rubbers, Plastics
Features: Anti-Wear Properties, Wide Temperature Operating Range, Service Life Extension
Chemical Family: Polyalphaolefins (PAO), Polyolefins, Fluoropolymers, Aluminum Compounds, Aluminum Complexes
Thickener Type: Aluminum Complex
MOLYKOTE® G-4501 FM Multi-Purpose Synthetic Grease is a specialty lubricant that combines the benefits of wide operating temperature and broad compatibility with varied materials.


DuPont
BETAPRIME® 5500
Ready to Use Product Type: Primer, 1K (1 component) Coating
Compatible Substrates & Surfaces: Glass
Features: Improved Adhesion
Chemical Family: Metallic Salts
BETAPRIME® 5500 is a one-step primer with short open time which can be used without silane wipe pretreatment. It is an adhesion-promoting primer for laminated glass with enamel layer inside and enamel substrates. BETAPRIME® 5500 is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.


DuPont
MEGUM® 3290-1LD
Ready to Use Product Type: 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Plastics, Fluoroelastomer
Application Method: Brush, Spray
MEGUM® 3290-1LD is a vulcanizing adhesive that can be used as a one-coat adhesive for the bonding of fluorocarbon rubbers to metals and other solid materials under vulcanization conditions. It is suitable for all common curing systems including bisphenolic and peroxide curing. MEGUM® 3290-1LD gives an outstanding resistance to external influences and high temperatures, and may be used with all conventional vulcanization methods. It is a rubber to substrate bonding system with more aggressive crosslinking chemistry to give good environmental resistance in the finished good.
DuPont
THIXON® OSN-2-EF-VV
Ready to Use Product Type: 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Polyesters, Elastomers & Rubbers, Aluminum, Painted Surfaces, Metal, Steel, Polyamide, Plastics
THIXON® OSN-2-EF-VV is a general purpose one-coat adhesive for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals. Formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone-depleting chemicals._x005F THIXON® OSN-2-EF-VV can bond Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Chlorosulfonated polyethylene (CSM), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF-VV is also used for post-vulcanization bonding. In addition, product bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance however THIXON® OSN-2-EF-VV does quite well as a stand alone coating in many general rubber to metal bonding situations._x005F THIXON® OSN-2-EF-VV is designed for faster curing cycles and possibly lower curing temperatures.