Products
DuPont
Liveo™ BioMedical Grade HCR Q7-4735
Polymer Name: Silicone Elastomer
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: Enhanced Tear Resistant, Non Blooming, High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency
Tear Strength: 35.0 - 35.0 kN/m
Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.
DuPont
Liveo™ Pharma 50 Tubing
Polymer Name: Silicone Elastomer
Physical Form: Tube
Features: Hydrophobic, Excellent Flexibility, Good Thermal Stability, Easily Sterilized, High Resilience, Consistent Performance, Low Emissions, Complete Traceability, Low Extractables, Rigorous Change Control
End Uses: Tubing, Medical/Healthcare Applications, Medical Devices
Tensile Strength: 90.0 - 90.0 MPa
Liveo™ Pharma 50 Tubing is Pharmaceutical grade silicone tubing for transferring of ultra-pure liquids, air or steam in pharmaceutical and biotechnological manufacturing processes. Designed for applications that require the transfer of high purity fluids where contamination is a concern like filling lines.
DuPont
Liveo™ Class VI Elastomers C6-180 Parts A & B
Polymer Name: Silicone Elastomer
Processing Methods: Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming
Liveo™ Class VI Elastomers (C6-135. C6-150, C6-165. C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.
DuPont
Liveo™ Class VI Elastomers C6-150 Parts A & B
Polymer Name: Silicone Elastomer
Processing Methods: Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming
Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.
DuPont
Liveo™ Class VI Elastomers C6-165 Parts A & B
Polymer Name: Silicone Elastomer
Processing Methods: Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Lot-to-lot consistency, Non Blooming
Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.
DuPont
Liveo™ BioMedical Grade HCR Q7-4750
Polymer Name: Silicone Elastomer
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming
Tear Strength: 46.0 - 46.0 kN/m
Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.
DuPont
Liveo™ QP1-250 Liquid Silicone Rubber Kit
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Injection Molding, Liquid Injection Molding
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Consistent High Quality, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions, Non Blooming
Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.
DuPont
Liveo™ MDX4-4210
Polymer Name: Silicone Elastomer
Processing Methods: Resin Transfer Molding, Compression Molding
End Uses: Prototyping, Medical/Healthcare Applications, Medical Devices, Mold Making
Features: Non Blooming, Translucent, Low Warpage, Consistent High Quality, Pourable, Pigmentable, Low Emissions, Good Thick Section Cure, Excellent Dielectric Properties
Liveo™ MDX4-4210 BioMedical Grade Elastomer is a pourable two- component product which, when combined, cures to a translucent silicone rubber over several hours at room temperatures, but may be more rapidly cured by application of heat.
DuPont
Liveo™ BioMedical Grade LSR Q7-4840
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed
Liveo™ Bio Medical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.
DuPont
Liveo™ Pharma Advanced Pump Tubing
Polymer Name: Silicone Elastomer
Physical Form: Tube
Features: Contamination Protection, Superior Resiliency, Hydrophobic, Excellent Flexibility, Durable, Tear Resistance, Easily Sterilized, Excellent Filling Accuracy, Consistent Performance, Complete Traceability, Low Extractables, Rigorous Change Control
End Uses: Tubing, Medical/Healthcare Applications, Medical Devices
Tensile Strength: 8.9 - 8.9 MPa
Liveo™ Pharma Advanced Pump Tubing is a Translucent pharmaceutical grade silicone tubing designed for pumping of ultrapure liquids in pharmaceutical and biotechnological manufacturing processes. Made from biomedical grade tear resistant platinum-cured elastomer. Liveo™ Pharma Advanced Pump Tubing used in peristaltic pumps where durability is required. DuPont Advanced Pump Tubing offers up to four times the pump life of standard platinum cure silicone tubing.
DuPont
Liveo™ BioMedical Grade LSR 7-4870
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Liveo™ BioMedical Grade LSR 7-4870 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.
DuPont
Liveo™ BioMedical Grade LSR Q7-4850
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: Autoclaved, Platinum Catalyzed, High Gas Permeability
Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion. Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.
DuPont
Liveo™ BioMedical Grade LSR Q7-4870
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: Autoclaved, Platinum Catalyzed, High Gas Permeability
Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.
DuPont
Zytel® FN727 NC010A
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Film Extrusion, Coating, Sheet, Plaques & Profiles Extrusion, Blow Molding, Injection Molding
Flexural Modulus: 900.0 - 900.0 MPa
Zytel® FN727 NC010A is an impact modified, plasticizer free, very flexible polyamide 6 alloy resin having good low temperature toughness, good heat aging and good chemical resistance. Uses include cable jacketing, hose and tube applications.
DuPont
Hytrel® 8238HS NCB010
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Film Extrusion, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Appliances, Automotive Applications, Power/Other Tools, Oil/Gas Applications, Industrial Applications, Furniture, Sporting Goods, Electrical/Electronic Applications, Wire & Cable Applications, Gears
Strain at Break: 250.0 - 250.0 %
Flexural Modulus: 1040.0 - 1040.0 MPa
Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilized, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilizers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free. The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry. Hytrel® 8238HS NCB010 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer and a cube blended heat stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:
DuPont
Liveo™ BioMedical Grade LSR 7-4860
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Liveo™ BioMedical Grade LSR 7-4860 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.
DuPont
Liveo™ QP1-70 Liquid Silicone Rubber Kit
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Injection Molding, Liquid Injection Molding
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions, Peroxide-free
Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.
DuPont
Liveo™ Class VI Elastomers C6-570 LSR
Polymer Name: Silicone Elastomer
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, Platinum Catalyzed, High Gas Permeability, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming
Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.
DuPont
Liveo™ BioMedical Grade HCR Q7-4780
Polymer Name: Silicone Elastomer
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming
Tear Strength: 26.0 - 26.0 kN/m
Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.
DuPont
Liveo™ BioMedical Grade HCR Q7-4765
Polymer Name: Silicone Elastomer
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: Non Blooming, Improved Tear Resistance, Pigmentable, Low Emissions, High Gas Permeability
Tear Strength: 39.0 - 39.0 kN/m
Liveo™ BioMedical Grade ETR Elastomers (Q7-series) are a series of two-part, enhanced-tearresistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.
DuPont
Hytrel® HTR8724 BK320
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Blow Molding, Extrusion
End Uses: Appliances, Automotive Applications, Power/Other Tools, Automotive Bumpers, Suspension Jounce Bumpers, Automotive Suspension, Industrial Applications, Furniture, Sporting Goods, Suspension Strut Stoppers, Electrical/Electronic Applications, Shock Absorbers, Suspension Rebound Bumpers
Density: 1160.0 - 1160.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 110.0 - 110.0 MPa
Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilized, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilizers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free. The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry. Hytrel® HTR8724 BK320 is a heat stable, plasticiser-free, high viscosity thermoplastic polyester elastomer designed for extrusion and blow molding processes. It has been developed for demanding applications such as automotive jounce bumpers.
DuPont
Liveo™ Pharma 80 Tubing
Polymer Name: Silicone Elastomer
Physical Form: Tube
Features: Contamination Protection, Hydrophobic, Kink Resistant, Excellent Flexibility, Good Thermal Stability, Easily Sterilized, High Resilience, Consistent Performance, Complete Traceability, Low Extractables, Rigorous Change Control
End Uses: Tubing, Medical/Healthcare Applications, Medical Devices
Tensile Strength: 70.0 - 70.0 MPa
Liveo™ Pharma 80 Tubing is a Pharmaceutical grade silicone tubing for transferring of ultra-pure liquids, air or steam in pharmaceutical and biotechnological manufacturing processes. Designed for applications that require the transfer of high purity fluids where contamination is a concern like filling lines. Cost effective alternative to reinforced tubing for moderate to high pressure or vacuum applications.
DuPont
TPSiV® 5300 A 6002 Natural Thermoplastic Elastomer
Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)
Processing Methods: Injection Molding, Extrusion
Density: 920.0 - 920.0 kg/m³
Tear Strength: 44.0 - 44.0 kN/m
TPSiV® 5300 A6002 thermoplastic elastomer is a low odor, plasticiser-free thermoplastic elastomer with excellent bonding to polypropylene and polyethylene. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.
DuPont
Liveo™ C6-750 LSR
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Injection Molding
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Fast Production Cycle, Autoclaved, Solventless, Consistent High Quality, High Gas Permeability, Platinum Catalyzed, Good Colorability, Can be post cured, Good Thermal Stability, Pigmentable, Fast Curing, Non Blooming
Liveo™ C6-740 Liquid Silicone Rubber, Liveo™ C6-750 Liquid Silicone Rubber, and Liveo™ C6-770 Liquid Silicone Rubber materials are two-part platinum-catalysed silicone elastomers specifically designed for liquid injection molding.
DuPont
Hytrel® HTR8341C BK320
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Bellows, Cosmetic Packaging, Automotive Applications, Constant Velocity Joint Boots, Containers, Bottles, Automotive Boots, Automotive Drivetrain, Film, Thermoforming Applications, Tubing, Automotive Bellows
Density: 1140.0 - 1140.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 80.0 - 80.0 MPa
Hytrel® HTR8341C BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 40D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer. It shows excellent mechanical properties at elevated temperatures, superior fatigue, abrasion, and grease resistance.
DuPont
Liveo™ Class VI Elastomers C6-540 LSR
Polymer Name: Silicone Elastomer
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, High Gas Permeability, Platinum Catalyzed, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming
Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.
DuPont
Hytrel® 6356BKB
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion
End Uses: Profiles, Film, Tubing, Fuel Tanks, Pipe Seals, Wire & Cable Applications, Gears, Hoses
Density: 1220.0 - 1220.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 290.0 - 290.0 MPa
Hytrel® 6356BKB is a medium modulus grade with nominal hardness of 63D. It is a cube blend of Hytrel® 6356 and Hytrel® 40CB. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
DuPont
Hytrel® 3078 BK176
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Film Extrusion, Casting, Blow Molding, Profile Extrusion, Injection Molding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Appliances, Automotive Applications, Power/Other Tools, Industrial Applications, Furniture, Sporting Goods, Electrical/Electronic Applications
Strain at Break: 300.0 - 300.0 %
Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilized, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilizers, and flame retardants.Hytrel® thermoplastic polyester elastomer is plasticiser free. The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry. Hytrel® 3078 BK176 is a very low modulus grade, with nominal hardness of 30D. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
DuPont
Liveo™ Class VI Elastomers C6-250
Polymer Name: Silicone Elastomer
Processing Methods: Resin Transfer Molding, Compression Molding, Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Blendable
Liveo™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.
DuPont
Liveo™ Class VI Elastomers C6-235
Polymer Name: Silicone Elastomer
Processing Methods: Resin Transfer Molding, Compression Molding, Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Blendable
Live™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.
DuPont
Liveo™ C6-740 LSR
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Injection Molding
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Fast Production Cycle, Autoclaved, Consistent High Quality, High Gas Permeability, Good Colorability, Platinum Catalyzed, Can be post cured, Good Thermal Stability, Pigmentable, Fast Curing, Non Blooming
Liveo™ C6-740 Liquid Silicone Rubber, Liveo™ C6-750 Liquid Silicone Rubber, and Liveo™ C6-770 Liquid Silicone Rubber materials are two-part platinum-catalysed silicone elastomers specifically designed for liquid injection molding.
DuPont
Liveo™ BioMedical Grade LSR 7-6860
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Liquid Injection Molding, Extrusion, Injection Molding
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: Good Thermal Stability, Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed
Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.
DuPont
TPSiV® 5300 A 6002 White T 25848 Thermoplastic Elastomer
Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)
Processing Methods: Injection Molding, Extrusion
Density: 920.0 - 920.0 kg/m³
Tear Strength: 44.0 - 44.0 kN/m
TPSiV® 5300 A6002 thermoplastic elastomer is a low odor, plasticiser-free thermoplastic elastomer with excellent bonding to polypropylene and polyethylene. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.
DuPont
Liveo™ QP1-75 Liquid Silicone Rubber Kit
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Injection Molding, Liquid Injection Molding
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions
Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.
DuPont
Liveo™ Class VI Elastomers C6-550 LSR
Polymer Name: Silicone Elastomer
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, Platinum Catalyzed, High Gas Permeability, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming
Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.
DuPont
Liveo™ QP1-60 Liquid Silicone Rubber Kit
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Injection Molding, Liquid Injection Molding
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions
Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.