Company logo

Products

DuPont
Search:
51 products found on DuPont
Matching Product Categories
Elastomers
End Uses: Body Implants
With TDS
Liveo™ Biomedical Grade Hcr Q7-4735 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4735

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Enhanced Tear Resistant, Non Blooming, High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency

Tear Strength: 35.0 - 35.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Liveo™ Class Vi Elastomers C6-180 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-180 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135. C6-150, C6-165. C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Liveo™ Class Vi Elastomers C6-150 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-150 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Liveo™ Class Vi Elastomers C6-165 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-165 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Liveo™ Biomedical Grade Hcr Q7-4750 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4750

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming

Tear Strength: 46.0 - 46.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Liveo™ Qp1-250 Liquid Silicone Rubber Kit product card banner

DuPont

Liveo™ QP1-250 Liquid Silicone Rubber Kit

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding, Liquid Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Consistent High Quality, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions, Non Blooming

Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.

Liveo™ Biomedical Grade Lsr Q7-4840 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4840

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed

Liveo™ Bio Medical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Liveo™ Biomedical Grade Lsr 7-4870 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-4870

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Liveo™ BioMedical Grade LSR 7-4870 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.

Liveo™ Biomedical Grade Lsr Q7-4850 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4850

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Autoclaved, Platinum Catalyzed, High Gas Permeability

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion. Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Liveo™ Biomedical Grade Lsr Q7-4870 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4870

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Autoclaved, Platinum Catalyzed, High Gas Permeability

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Liveo™ Biomedical Grade Lsr 7-4860 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-4860

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Liveo™ BioMedical Grade LSR 7-4860 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.

Liveo™ Qp1-70 Liquid Silicone Rubber Kit product card banner

DuPont

Liveo™ QP1-70 Liquid Silicone Rubber Kit

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding, Liquid Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions, Peroxide-free

Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.

Liveo™ Class Vi Elastomers C6-570 Lsr product card banner

DuPont

Liveo™ Class VI Elastomers C6-570 LSR

Polymer Name: Silicone Elastomer

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, Platinum Catalyzed, High Gas Permeability, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming

Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.

Liveo™ Biomedical Grade Hcr Q7-4780 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4780

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming

Tear Strength: 26.0 - 26.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Liveo™ Biomedical Grade Hcr Q7-4765 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4765

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Non Blooming, Improved Tear Resistance, Pigmentable, Low Emissions, High Gas Permeability

Tear Strength: 39.0 - 39.0 kN/m

Liveo™ BioMedical Grade ETR Elastomers (Q7-series) are a series of two-part, enhanced-tearresistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Liveo™ C6-750 Lsr product card banner

DuPont

Liveo™ C6-750 LSR

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Autoclaved, Solventless, Consistent High Quality, High Gas Permeability, Platinum Catalyzed, Good Colorability, Can be post cured, Good Thermal Stability, Pigmentable, Fast Curing, Non Blooming

Liveo™ C6-740 Liquid Silicone Rubber, Liveo™ C6-750 Liquid Silicone Rubber, and Liveo™ C6-770 Liquid Silicone Rubber materials are two-part platinum-catalysed silicone elastomers specifically designed for liquid injection molding.

Liveo™ Class Vi Elastomers C6-540 Lsr product card banner

DuPont

Liveo™ Class VI Elastomers C6-540 LSR

Polymer Name: Silicone Elastomer

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, High Gas Permeability, Platinum Catalyzed, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming

Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.

Liveo™ Qp1-50 Silicone Elastomer product card banner

DuPont

Liveo™ QP1-50 Silicone Elastomer

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding, Calendering, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Solventless, Good Colorability, High Consistency, Can be post cured, Pigmentable, Low Emissions, Tissue Culture Testing Warranted, Translucent

Liveo™ QPI Silicone Elastomers are a one-part high consistency rubber base which is supplied absent any catalyst.

Liveo™ Qp1-30 Silicone Elastomer product card banner

DuPont

Liveo™ QP1-30 Silicone Elastomer

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding, Calendering, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Solventless, Good Colorability, Can be post cured, Pigmentable, Low Emissions, Tissue Culture Testing Warranted, Translucent

Liveo"' QPI Silicone Elastomers are a one-part high consistency rubber base which is supplied absent any catalyst.

Liveo™ Class Vi Elastomers C6-250 product card banner

DuPont

Liveo™ Class VI Elastomers C6-250

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Blendable

Liveo™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.

Liveo™ Class Vi Elastomers C6-235 product card banner

DuPont

Liveo™ Class VI Elastomers C6-235

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Blendable

Live™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.

Liveo™ C6-740 Lsr product card banner

DuPont

Liveo™ C6-740 LSR

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Autoclaved, Consistent High Quality, High Gas Permeability, Good Colorability, Platinum Catalyzed, Can be post cured, Good Thermal Stability, Pigmentable, Fast Curing, Non Blooming

Liveo™ C6-740 Liquid Silicone Rubber, Liveo™ C6-750 Liquid Silicone Rubber, and Liveo™ C6-770 Liquid Silicone Rubber materials are two-part platinum-catalysed silicone elastomers specifically designed for liquid injection molding.

Liveo™ Biomedical Grade Lsr 7-6860 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-6860

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Liquid Injection Molding, Extrusion, Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Good Thermal Stability, Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.

Liveo™ Qp1-75 Liquid Silicone Rubber Kit product card banner

DuPont

Liveo™ QP1-75 Liquid Silicone Rubber Kit

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding, Liquid Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions

Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.

Liveo™ Class Vi Elastomers C6-550 Lsr product card banner

DuPont

Liveo™ Class VI Elastomers C6-550 LSR

Polymer Name: Silicone Elastomer

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, Platinum Catalyzed, High Gas Permeability, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming

Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.

Liveo™ Qp1-60 Liquid Silicone Rubber Kit product card banner

DuPont

Liveo™ QP1-60 Liquid Silicone Rubber Kit

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding, Liquid Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions

Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.

Liveo™ Biomedical Grade Lsr 7-6840 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-6840

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Autoclaved, Heat Stabilized, High Gas Permeability, Platinum Catalyzed, Good Colorability

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.

Liveo™ Qp1-230 Liquid Silicone Rubber Kit product card banner

DuPont

Liveo™ QP1-230 Liquid Silicone Rubber Kit

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding, Liquid Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Good Colorability, Good Processability, Low Emissions

Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.

Liveo™ Qp1-50 Liquid Silicone Rubber Kit product card banner

DuPont

Liveo™ QP1-50 Liquid Silicone Rubber Kit

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding, Liquid Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Consistent High Quality, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions

Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.

Liveo™ Class Vi Elastomers C6-265 product card banner

DuPont

Liveo™ Class VI Elastomers C6-265

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Blendable

Liveo™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.

Liveo™ Class Vi Elastomer C6-350lh Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomer C6-350LH Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Good Colorability, Non-tacky surface, Enhanced Physical Properties, Can be post cured, Low Emissions, Lot-to-lot consistency, High Resilience, Non Blooming

Liveo™ C6-350LH Elastomer, Parts A & B is a two-part platinum-catalyzed silicone elastomer.

Liveo™ Biomedical Grade Hcr Q7-4720 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4720

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming

Tear Strength: 31.0 - 31.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Liveo™ Qp1-270 Liquid Silicone Rubber Kit product card banner

DuPont

Liveo™ QP1-270 Liquid Silicone Rubber Kit

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding, Liquid Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Consistent High Quality, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions

Liveo™ QP1-270 Liquid Silicone Rubber Kit by DuPont is comprised of Silicone Elastomer and Liquid Silicone Rubber. It is commonly used It is a Peroxide-free, Solvent-free, Plasticizer-free, Phthalates-free and Chlorophenyl-free Liveo™ QP1-270 Liquid Silicone Rubber Kit is certified as FDA and USP-NF.

Liveo™ Class Vi Elastomers C6-135 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-135 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Liveo™ C6-720 Lsr product card banner

DuPont

Liveo™ C6-720 LSR

Polymer Name: Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding

End Uses: Medical Devices, Body Implants

Features: Fast Production Cycle, Pigmentable, Solventless, Consistent High Quality, Fast Curing, Good Colorability, Can be post cured, Non Blooming

Liveo™ C6-720 Liquid Silicone Rubber, Liveo™ C6-740 Liquid Silicone Rubber, Liveo™ C6-750 Liquid Silicone Rubber, and Liveo™ C6-770 Liquid Silicone Rubber materials are two-part platinum-catalysed silicone elastomers specifically designed for liquid injection molding.

Liveo™ Biomedical Grade Lsr 7-6830 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-6830

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Heat Stabilized, Autoclaved, High Gas Permeability, Platinum Catalyzed

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.