Company logo

Products

DuPont
Matching Product Categories
Plastics
Elastomers
End Uses: Connectors
66 products found on DuPont.
With TDS
Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Wires, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Cast Films, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Delrin® 577 Bk000 product card banner

DuPont

Delrin® 577 BK000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 4600.0 - 4600.0 MPa

Delrin® 577 is a medium viscosity acetal homopolymer (Polyoxymethylene POM) containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature. It contains carbon black for improved weathering.

Delrin® 111pa Nc010 product card banner

DuPont

Delrin® 111PA NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 111PA NC010 is a Nucleated High Viscosity Acetal Homopolymer.

Crastin® Hr5330hfs Bk591 product card banner

DuPont

Crastin® HR5330HFS BK591

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Impact Modifier, Hydrolysis Stabilizer

Crastin® HR5330HFS BK591 is a 30% Glass Reinforced Polybutylene Terephthalate with high flow, moderately toughened, and hydrolysis-resistant (HR) for injection molding.

Zytel® 70g30hslr Bk099 product card banner

DuPont

Zytel® 70G30HSLR BK099

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 9000.0 - 9000.0 MPa

Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.

Delrin® Fg911dp Nc010 product card banner

DuPont

Delrin® FG911DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3300.0 - 3300.0 MPa

Delrin® FG911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

Crastin® Lw9320 Bk851 product card banner

DuPont

Crastin® LW9320 BK851

Polymer Name: PBT/SAN Alloy

Processing Methods: Injection Molding

Density: 1340.0 - 1340.0 kg/m³

Flexural Modulus: 7000.0 - 7000.0 MPa

Crastin® LW9320 BK851 is a 20% glass fiber reinforced polybutylene terephthalate blend for injection molding. It has improved surface aesthetics, excellent dimensional stability and low warpage characteristics.

Zytel® Htn51g35ef Bk083 product card banner

DuPont

Zytel® HTN51G35EF BK083

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 11000.0 - 11000.0 MPa

Zytel® HTN51G35EF BK083 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin developed for electrical and electronics applications. It is also a PPA resin.

Delrin® Fg500mxd Bla090 product card banner

DuPont

Delrin® FG500MXD BLA090

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 3400.0 - 3400.0 MPa

Delrin® FG500MXD is a metal- and X-ray-detectable medium viscosity acetal homopolymer for injection molding and extrusion. It has been developed for applications in contact with food. Detection limits need to be determined as a function of the detector and other process variables.

Zytel® Htn52g35hsl Bk083 product card banner

DuPont

Zytel® HTN52G35HSL BK083

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/66 (PA 6T/66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 10300.0 - 10300.0 MPa

Zytel® HTN52G35HSL BK083 is a 35% glass-reinforced, heat stabilized, lubricated high performance polyamide resin that can be molded in water heated molds. It is also a PPA resin.

Delrin® 500mt Nc010 product card banner

DuPont

Delrin® 500MT NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Cable Extrusion, Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 1500.0 - 1500.0 MPa

Delrin® 500MT NC010 is a Medium Toughened, Toughened, Medium Viscosity Acetal Homopolymer.

Delrin® Fg111dp Nc010 product card banner

DuPont

Delrin® FG111DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® FG111DP is a high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

Crastin® Sk645fr Bk851 product card banner

DuPont

Crastin® SK645FR BK851

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Flame Retardant

Crastin® SK645FR is a flame retardant, 30% glass-reinforced polybutylene terephthalate molding resin. It is recognized as UL94V-0 at 0.75mm.

Delrin® Fg100 Nc010 product card banner

DuPont

Delrin® FG100 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Flexural Modulus: 2700.0 - 2700.0 MPa

Delrin® FG100 NC010 is a High Viscosity Acetal Homopolymer.

Zytel® 70g35ef Nc010 product card banner

DuPont

Zytel® 70G35EF NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 10000.0 - 10000.0 MPa

Zytel® 70G35EF NC010 is a 35% glass-reinforced polyamide 66 developed for electrical and electronics applications.

Zytel® Htn51g35hsl Nc010 product card banner

DuPont

Zytel® HTN51G35HSL NC010

Polymer Name: Polyamide 6T/XT (PA 6T/XT), Polyphthalamide (PPA)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 10300.0 - 10300.0 MPa

Zytel® HTN51G35HSL NC010 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin. It is also a PPA resin.

Zytel® Htn51g35hsl Bk083 product card banner

DuPont

Zytel® HTN51G35HSL BK083

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 12600.0 - 12600.0 MPa

Zytel® HTN51G35HSL BK083 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin. It is also a PPA resin.

Crastin® Lw9320lm Bk591 product card banner

DuPont

Crastin® LW9320LM BK591

Polymer Name: PBT/SAN Alloy

Processing Methods: Injection Molding

Density: 1350.0 - 1350.0 kg/m³

Flexural Modulus: 7000.0 - 7000.0 MPa

Crastin® LW9320LM is a 20% glass fiber reinforced polybutylene terephthalate blend for injection molding. It has excellent surface aspect, dimensional stability and low warpage and was developed for laser marking applications..

Crastin® Lw9020 Nc010 product card banner

DuPont

Crastin® LW9020 NC010

Polymer Name: PBT/ASA Alloy

Processing Methods: Injection Molding

Density: 1350.0 - 1350.0 kg/m³

Flexural Modulus: 6300.0 - 6300.0 MPa

Crastin® LW9020 NC010 is a 20% glass fiber reinforced polybutylene terephthalate blend for injection molding. It has improved surface aesthetics, excellent dimensional stability and low warpage characteristics.

Zytel® Lcpa 158 Nc010 product card banner

DuPont

Zytel® LCPA 158 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding, Extrusion, Coating

Zytel® 158 NC010 is an intermediate viscosity polyamide 612 resin.

Zytel® Htnfr42g30nh Nc010 product card banner

DuPont

Zytel® HTNFR42G30NH NC010

Polymer Name: Polyphthalamide (PPA)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Flame Retardant

Flexural Modulus: 11200.0 - 11200.0 MPa

Zytel® HTNFR42G30NH NC010 is a 30% glass-reinforced, flame retardant high performance polyamide resin developed for improved reflow soldering performance in connector applications. It is also a PPA resin and it uses a non-halogenated flame retardant.

Crastin® Sk645fr Nc010 product card banner

DuPont

Crastin® SK645FR NC010

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Flame Retardant

Flexural Modulus: 9500.0 - 9500.0 MPa

Crastin® SK645FR is a flame retardant, 30% glass-reinforced polybutylene terephthalate molding resin. It is recognized as UL94V-0 at 0.75mm.

Crastin® Sk605 Bk851 product card banner

DuPont

Crastin® SK605 BK851

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding, Extrusion

Fillers Included: Glass Fiber

Additives Included: Hydrolysis Stabilizer

Flexural Modulus: 9000.0 - 9000.0 MPa

Crastin® SK605 BK851 is a 30% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.

Delrin® 100km Nc000 product card banner

DuPont

Delrin® 100KM NC000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Injection Molding

Fillers Included: Kevlar Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 100KM NC000 is a high viscosity acetal homopolymer with Kevlar® aramid resin. It is designed for applications requiring low wear in abrasive environments.

Crastin® Lw9030 Nc010 product card banner

DuPont

Crastin® LW9030 NC010

Polymer Name: PBT/ASA Alloy

Processing Methods: Injection Molding

Density: 1440.0 - 1440.0 kg/m³

Flexural Modulus: 8500.0 - 8500.0 MPa

Crastin® LW9030 NC010 is a 30% glass fiber reinforced polybutylene terephthalate blend for injection molding. It has improved surface aesthetics, excellent dimensional stability and low warpage characteristics.

Zytel® Htnfe8200 Nc010 product card banner

DuPont

Zytel® HTNFE8200 NC010

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2100.0 - 2100.0 MPa

Zytel® HTNFE8200 NC010 is an unreinforced, toughened, heat stabilized high performance polyamide resin for injection molding. It is also a PPA resin.

Crastin® Lw9330 Nc010 product card banner

DuPont

Crastin® LW9330 NC010

Polymer Name: PBT/SAN Alloy

Processing Methods: Injection Molding

Density: 1420.0 - 1420.0 kg/m³

Flexural Modulus: 8400.0 - 8400.0 MPa

Crastin® LW9330 NC010 is a 30% glass fiber reinforced polybutylene terephthalate blend for injection molding. It has improved surface aesthetics, excellent dimensional stability and low warpage characteristics.

Crastin® Hr5315hfs Nc010 product card banner

DuPont

Crastin® HR5315HFS NC010

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Impact Modifier, Hydrolysis Stabilizer

Crastin® HR5315HFS is a 15% glass-reinforced PBT with high flow, moderately toughened, hydrolysis-resistant (HR) polybutylene terephtalate for injection molding.

Crastin® Sk605 Nc010 product card banner

DuPont

Crastin® SK605 NC010

Polymer Name: Thermoplastic Polyester, Polybutylene Terephthalate (PBT)

Processing Methods: Extrusion, Injection Molding, Profile Extrusion

Fillers Included: Glass Fiber

Additives Included: Hydrolysis Stabilizer, Mold Release Agent

Flexural Modulus: 9000.0 - 9000.0 MPa

Crastin® SK605 NC010 is a 30% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.

Crastin® T841fr1 Nc010 product card banner

DuPont

Crastin® T841FR1 NC010

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding, Extrusion

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Flame Retardant

Crastin® T841FR1 is a 10% glass fiber reinforced, flame retardant, polybutylene terephthalate for injection molding. It has improved impact resistance and good surface finish of molded parts.

Delrin® 300cp Bk602 product card banner

DuPont

Delrin® 300CP BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Delrin® 300CP is a medium-high viscosity acetal homopolymer with improved thermal stability and an outstanding balance of ease of processing and part performance. This black is formulated to maintain the mechanical properties of the natural.

Zytel® Htnfe8200 Bk431 product card banner

DuPont

Zytel® HTNFE8200 BK431

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)

Processing Methods: Injection Molding

Flexural Modulus: 2100.0 - 2100.0 MPa

Zytel® HTNFE8200 BK431 is an unreinforced, toughened, heat stabilized high performance polyamide resin for injection molding. It is also a PPA resin.

Zytel® Htnfr52g30bl Bk337 product card banner

DuPont

Zytel® HTNFR52G30BL BK337

Polymer Name: Polyamide 6T/66 (PA 6T/66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Flame Retardant

Flexural Modulus: 10000.0 - 10000.0 MPa

Zytel® HTNFR52G30BL BK337 is a 30% glass-reinforced, flame retardant, lubricated high performance polyamide resin that has been developed for connector applications.

Zytel® Htn510eft Nc010 product card banner

DuPont

Zytel® HTN510EFT NC010

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Zytel® HTN510EFT NC010 is an unreinforced, toughened, heat stabilized high performance polyamide resin for injection molding. It is also a PPA resin.

Zytel® 70g35ef Bk538 product card banner

DuPont

Zytel® 70G35EF BK538

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 9500.0 - 9500.0 MPa

Zytel® 70G35EF BK538 is a 35% glass-reinforced polyamide 66 developed for electrical and electronics applications