Company logo

Products

DuPont
Search:
22 products found on DuPont
Matching Product Categories
Elastomers
End Uses: Film
With TDS
Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® 4556 product card banner

DuPont

Hytrel® 4556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® 3078 product card banner

DuPont

Hytrel® 3078

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1070.0 - 1070.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 27.0 - 27.0 MPa

Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Hytrel® G4074 product card banner

DuPont

Hytrel® G4074

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Electrical/Electronic Applications, Cast Films, Wire & Cable Applications, Hoses, General Purpose, Cosmetic Packaging, Appliances, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing

Density: 1180.0 - 1180.0 kg/m³

Strain at Break: 250.0 - 250.0 %

Flexural Modulus: 65.0 - 65.0 MPa

Hytrel® G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, mouldedproducts. Not suited for light-colored finished products.

Hytrel® 4069 product card banner

DuPont

Hytrel® 4069

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Hoses, Belts/Belt Repair, Cosmetic Packaging, Appliances, Automotive Applications, Corrugated Pipe, Film, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 45.0 - 45.0 MPa

Hytrel® 4069 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® 4068fg product card banner

DuPont

Hytrel® 4068FG

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Corrugated Pipe, Film, Thermoforming Applications, Tubing, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 47.0 - 47.0 MPa

Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Hytrel® G3548 Nc010 product card banner

DuPont

Hytrel® G3548 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Injection Molding, Extrusion

End Uses: Appliances, Automotive Applications, Film, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1150.0 - 1150.0 kg/m³

Strain at Break: 190.0 - 190.0 %

Flexural Modulus: 25.0 - 25.0 MPa

Hytrel® G3548 is a low modulus grade with nominal hardness of 35D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® G4774 product card banner

DuPont

Hytrel® G4774

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Wire & Cable Applications, Jacketing, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 200.0 - 200.0 %

Flexural Modulus: 111.0 - 111.0 MPa

Hytrel® G4774 is a medium modulus grade with nominal hardness of 47D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications: Hose and tubing, wire and cable jackets, film and sheeting, profiles and molded products. Not suited for light-colored finished products.

Hytrel® 7246hs Nc010 product card banner

DuPont

Hytrel® 7246HS NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 500.0 - 500.0 MPa

Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® Htr8223 Bk320 product card banner

DuPont

Hytrel® HTR8223 BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Bellows, Cosmetic Packaging, Automotive Applications, Constant Velocity Joint Boots, Containers, Bottles, Automotive Boots, Automotive Drivetrain, Film, Thermoforming Applications, Tubing, Automotive Bellows

Density: 1130.0 - 1130.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 79.0 - 79.0 MPa

Hytrel® HTR8223 BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 42D.Typical applications:Constant velocity joint boots.

Hytrel® Htr8139bk product card banner

DuPont

Hytrel® HTR8139BK

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Blow Molding, Injection Molding

End Uses: Cosmetic Packaging, Film, Thermoforming Applications, Tubing, Automotive Applications, Containers, Bottles

Density: 1150.0 - 1150.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® HTR8139BK is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 44D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.Typical applications:Constant velocity joint boots.

Hytrel® Htr8206 product card banner

DuPont

Hytrel® HTR8206

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding

End Uses: Film, Appliances, Sporting Goods, Tubing, Office Automation Equipment

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 80.0 - 80.0 MPa

Hytrel® HTR8206 is a High Performance Polyester Elastomer with High Moisture Vapor Transmission Rate Developed for Extrusion and Injection Molding

Hytrel® Htr8441 Bk316 product card banner

DuPont

Hytrel® HTR8441 BK316

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Blow Molding, Injection Molding, Extrusion

End Uses: Cosmetic Packaging, Pipes, Automotive Applications, Air Ducts, Containers, Bottles, Film, Automotive Air Management Line, Cast Films, Hoses

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® HTR8441 is a 55 nom. Shore D thermoplastic polyester elastomer for blow molding. It provides good mechanical properties at high temperature.

Hytrel® 6356bkb product card banner

DuPont

Hytrel® 6356BKB

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Profiles, Film, Tubing, Fuel Tanks, Pipe Seals, Wire & Cable Applications, Gears, Hoses

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356BKB is a medium modulus grade with nominal hardness of 63D. It is a cube blend of Hytrel® 6356 and Hytrel® 40CB. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® Htr8341c Bk320 product card banner

DuPont

Hytrel® HTR8341C BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Bellows, Cosmetic Packaging, Automotive Applications, Constant Velocity Joint Boots, Containers, Bottles, Automotive Boots, Automotive Drivetrain, Film, Thermoforming Applications, Tubing, Automotive Bellows

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 80.0 - 80.0 MPa

Hytrel® HTR8341C BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 40D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer. It shows excellent mechanical properties at elevated temperatures, superior fatigue, abrasion, and grease resistance.

Hytrel® Htr4275 Bk316 product card banner

DuPont

Hytrel® HTR4275 BK316

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Blow Molding, Injection Molding, Extrusion

End Uses: Hoses, Cosmetic Packaging, Crates, Pipes, Automotive Applications, Air Ducts, Containers, Bottles, Automotive Boots, Film, Automotive Air Management Line, Thermoforming Applications, Tubing, Cast Films

Density: 1170.0 - 1170.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 160.0 - 160.0 MPa

Hytrel® HTR4275 BK316 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 55D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.Typical applications:Hollow thin wall parts requiring a tough polymer with excellent flexibility and temperature properties such as automotive boots.

Hytrel® 7246hs Bk320 product card banner

DuPont

Hytrel® 7246HS BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 510.0 - 510.0 MPa

Hytrel® 7246HS BK320 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® 4056p product card banner

DuPont

Hytrel® 4056P

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Rotational Molding, Coextrusion, Injection Molding

End Uses: Film, Cosmetic Packaging, Thermoforming Applications, Tubing, Wire & Cable Applications

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 64.0 - 64.0 MPa

Hytrel® 4056P is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It is delivered in a powder form.

Hytrel® Htr6108 product card banner

DuPont

Hytrel® HTR6108

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Blow Molding, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Film, Thermoforming Applications, Tubing

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 290.0 - 290.0 %

Flexural Modulus: 170.0 - 170.0 MPa

Hytrel® HTR6108 is a 61 Shore D High Performance Polyester Elastomer with Low Permeability to Fuels and Oils

Hytrel® 4053fg Nc010 product card banner

DuPont

Hytrel® 4053FG NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Non Specific Food Applications, Film, Thermoforming Applications

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® 4053FG is a low modulus high performance thermoplastic elastomer developed for applications in contact with food. It is suitable for extrusion and injection molding processes.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, belting and seals.

Hytrel® Htr8068 product card banner

DuPont

Hytrel® HTR8068

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Film, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Cast Films, Wire & Cable Applications, Jacketing

Density: 1430.0 - 1430.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 155.0 - 155.0 MPa

Hytrel® HTR8068 is a medium modulus flame retardant and antidrip Hytrel® resin that meets the requirement of UL94 V-0. It has nominal