Company logo

Products

DuPont
Matching Product Categories
Plastics
Elastomers
End Uses: Gears
30 products found on DuPont.
With TDS
Delrin® 100 Nc010 product card banner

DuPont

Delrin® 100 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

Delrin® 100p Nc010 product card banner

DuPont

Delrin® 100P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.

Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Fuel Tanks, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Delrin® 500cl Nc010 product card banner

DuPont

Delrin® 500CL NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 500CL is a medium viscosity acetal homopolymer containing a chemical lubricant, designed for low wear and friction against metals.

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Cast Films, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Delrin® 500al Nc010 product card banner

DuPont

Delrin® 500AL NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 500AL is a medium viscosity acetal homopolymer containing an advanced system of lubrication designed for low wear, low friction, and low noise against metals and plastics.

Multibase™ Hmb-1103 product card banner

DuPont

MULTIBASE™ HMB-1103

Function: Slip Agent, Melt Flow Agent, Anti-Wear Agent

Chemical Family: Silicones

Compatible Polymers & Resins: Polyoxymethylene (POM), Polyamides

DuPont HMB-1103 Masterbatch is a new-generation tribological modifier and processing aid designed for polar engineered based systems such as PA. DuPont HMB-1103 Masterbatch delivers slip and wear performance similar to that of standard, highly loaded PTFE compounds. DuPont HMB-1103 Masterbatch is also highly efficient at suppressing stick-slip phenomenon. DuPont HMB-1103 Masterbatch acts as a processing aid and improves flowability.

Zytel® Lcpa 158 Nc010 product card banner

DuPont

Zytel® LCPA 158 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding, Extrusion, Coating

Zytel® 158 NC010 is an intermediate viscosity polyamide 612 resin.

Delrin® 100 Bk602 product card banner

DuPont

Delrin® 100 BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

Crastin® 6130 Nc010 product card banner

DuPont

Crastin® 6130 NC010

Polymer Name: Polybutylene Terephthalate (PBT)

Processing Methods: Injection Molding, Extrusion, Coating

Crastin® 6130 NC010 is an unreinforced, medium/high viscosity polybutylene terephthalate resin for extrusion and injection molding.

Hytrel® 8238hs Ncb010 product card banner

DuPont

Hytrel® 8238HS NCB010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Film Extrusion, Casting, Injection Molding, Extrusion

End Uses: Appliances, Cables, Automotive Applications, Power/Other Tools, Oil/Gas Applications, Industrial Applications, Furniture, Sporting Goods, Wires, Electrical/Electronic Applications, Gears

Strain at Break: 250.0 - 250.0 %

Flexural Modulus: 1040.0 - 1040.0 MPa

Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilized, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilizers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free. The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry. Hytrel® 8238HS NCB010 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer and a cube blended heat stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:

Rynite® 530hte Nc010 product card banner

DuPont

Rynite® 530HTE NC010

Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Rynite® 530HTE NC010 is a 30% glass-reinforced modified polyethylene terephthalate resin with excellent high temperature dielectric properties.

Delrin® 100p Bk602 product card banner

DuPont

Delrin® 100P BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength and improved processing thermal stability and productivity for injection molding.

Delrin® 500cl Bk601 product card banner

DuPont

Delrin® 500CL BK601

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 500CL is a medium viscosity acetal homopolymer containing a chemical lubricant, designed for low wear and friction against metals.

Multibase™ Mb40-006 product card banner

DuPont

MULTIBASE™ MB40-006

Function: Abrasion Resistant, Anti-Wear Agent, Slip Agent

Compatible Polymers & Resins: Polyoxymethylene (POM)

Processing Methods: Injection Molding

Carrier: Polyoxymethylene (POM), Resin-based

Features: Good Mold Release, Low Wear, Abrasion Resistant, Lubricated, High Flow, Low Friction, Good Mechanical Properties, Tribological Modifier, Good Processability, Mar Resistant

DuPont MB40-006 Masterbatch is a tribological modifier for polyacetal based systems. This additive is an easy to handle pellet. DuPont MB40-006 Masterbatch unable you to achieve lower coefficient of friction compared to standard PTFE. Typical additivation levels between 2 and 5wt% show highly efficient coefficient of friction reduction by at least 20% vs corresponding 15-20wt% PTFE formulations against POM and stainless steel. DuPont MB40-006 masterbatch allows you to recover lost mechanical performances (tensile and impact) vs standard PTFE and reach initial performances of neat polyacetal. DuPont MB40-006 Masterbatch is also highly efficient at suppressing stick-slip phenomenon at low speed when used in applications against steel following VDA 230-206 norm. DuPont MB40-006 Masterbatch suits for long term applications.

Rynite® 530 Bk503 product card banner

DuPont

Rynite® 530 BK503

Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 8940.0 - 8940.0 MPa

Rynite® 530 BK503 is a 30% glass-reinforced modified polyethylene terephthalate resin.

Hytrel® 6356bkb product card banner

DuPont

Hytrel® 6356BKB

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Cables, Profiles, Film, Wires, Tubing, Fuel Tanks, Pipe Seals, Gears, Hoses

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356BKB is a medium modulus grade with nominal hardness of 63D. It is a cube blend of Hytrel® 6356 and Hytrel® 40CB. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Rynite® 530 Nc010 product card banner

DuPont

Rynite® 530 NC010

Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 8950.0 - 8950.0 MPa

Rynite® 530 NC010 is a 30% glass-reinforced modified polyethylene terephthalate resin.

Crastin® 6129 Nc010 product card banner

DuPont

Crastin® 6129 NC010

Polymer Name: Polybutylene Terephthalate (PBT)

Processing Methods: Injection Molding, Extrusion, Coating

Flexural Modulus: 2400.0 - 2400.0 MPa

Crastin® 6129 is an unreinforced, high viscosity polybutylene terephthalate for extrusion and injection molding.

Crastin® Bm6450xd Bk560 product card banner

DuPont

Crastin® BM6450XD BK560

Polymer Name: Polybutylene Terephthalate (PBT)

Processing Methods: Extrusion, Film Extrusion, Blow Molding, Casting, Injection Molding, Coating

Additives Included: Mold Release Agent

Flexural Modulus: 1600.0 - 1600.0 MPa

Crastin® BM6450XD BK560 is an unreinforced super-tough polybutylene terephthalate resin with very high viscosity for extrusion and blow molding applications.

Crastin® S600f10 Nc010 product card banner

DuPont

Crastin® S600F10 NC010

Polymer Name: Polybutylene Terephthalate (PBT)

Processing Methods: Injection Molding, Extrusion, Coating

Additives Included: Mold Release Agent

Flexural Modulus: 2400.0 - 2400.0 MPa

Crastin® SC193 NC010 (Complete Data) is a 30% Glass Reinforced Polybutylene Terephthalate Blend Developed for Healthcare Industry

Crastin® So653 Nc010 product card banner

DuPont

Crastin® SO653 NC010

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Bead

Additives Included: Mold Release Agent

Crastin® SO653 NC010 is a 20% glass bead filled polybutylene terephthalate resin for injection molding. It has isotropic properties and low warpage characteristics.

Zytel® Lcpa Lc7601 Nc010 product card banner

DuPont

Zytel® LCPA LC7601 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Extrusion, Coating, Film Extrusion, Casting

Additives Included: Plasticizer (Unspecified)

Flexural Modulus: 550.0 - 550.0 MPa

Zytel® LCPA LC7601 NC010 is a flexible, toughened, plasticized polyamide resin for extrusion. It has low moisture absorption, excellent chemical resistance and good heat resistance. DuPont™ Zytel® LCPA long chain polyamide resins provide an innovative and growing portfolio of flexible polymers with excellent thermal, chemical, and hydrolysis resistance. The diverse selection of Zytel® LCPA grades is targeted for a range of performance characteristics, balancing temperature resistance, flexibility and low permeation.

Crastin® S600f10 Bk851 product card banner

DuPont

Crastin® S600F10 BK851

Polymer Name: Polybutylene Terephthalate (PBT)

Processing Methods: Injection Molding, Extrusion, Coating

Flexural Modulus: 2400.0 - 2400.0 MPa

Crastin® SC164 NC010 (Complete Data) is an Unreinforced Low Viscosity Polybutylene Terephthalate

Zytel® Lcpa Rs Htn59g55 Bk083 product card banner

DuPont

Zytel® LCPA RS HTN59G55 BK083

Polymer Name: Polyamide (unspecified)

Fillers Included: Glass Fiber

Additives Included: Release agent

Flexural Modulus: 14800.0 - 14800.0 MPa

Crastin® Lw9020sf Nc010 product card banner

DuPont

Crastin® LW9020SF NC010

Polymer Name: PBT/ASA Alloy

Processing Methods: Injection Molding

Density: 1390.0 - 1390.0 kg/m³

Crastin® LW9020SF NC010 is a 20% glass fiber reinforced polybutylene terephthalate blend for fast injection molding. It has improved surface aesthetics, excellent dimensional stability and low warpage characteristics.

Hytrel® Htr8936 Bk320 product card banner

DuPont

Hytrel® HTR8936 BK320

Polymer Name: Thermoplastic Polyester Elastomer

Processing Methods: Blow Molding

End Uses: Furniture, Sporting Goods, Gaskets, Gears, Cable Jacketing

Density: 1170.0 - 1170.0 kg/m³

Strain at Break: 270.0 - 270.0 %

Flexural Modulus: 176.0 - 176.0 MPa

Hytrel® HTR8936 BK320 is a high viscosity thermoplastic polyester elastomer designed for blow molding. It has been developed for improved heat ageing and improved chemical resistance. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry. Hytrel® thermoplastic polyester elastomer is plasticiser free.

Zytel® Lcpa Fe110007 Nc010 product card banner

DuPont

Zytel® LCPA FE110007 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding

Additives Included: Lubricant (Unspecified), Release agent

Zytel® LCPA FE110007 NC010 is an unreinforced, lubricated polyamide 612 resin suitable for injection molding. DuPont™ Zytel® LCPA long chain polyamide resins provide an innovative and growing portfolio of flexible polymers with excellent thermal, chemical, and hydrolysis resistance. The diverse selection of Zytel® LCPA grades is targeted for a range of performance characteristics, balancing temperature resistance, flexibility and low permeation.

Zytel® Lcpa Fe5382 Nc010 product card banner

DuPont

Zytel® LCPA FE5382 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Release agent, Lubricant (Unspecified)

Zytel® LCPA FE5382 NC010 is a 33% glass fiber reinforced, heat stabilized polyamide 612 resin developed for electrical bobbins and encapsulation applications. DuPont™ Zytel® LCPA long chain polyamide resins provide an innovative and growing portfolio of flexible polymers with excellent thermal, chemical, and hydrolysis resistance. The diverse selection of Zytel® LCPA grades is targeted for a range of performance characteristics, balancing temperature resistance, flexibility and low permeation.

Zytel® Lcpa 158l Nc010 product card banner

DuPont

Zytel® LCPA 158L NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Extrusion, Film Extrusion, Casting, Injection Molding, Coating

Additives Included: Lubricant (Unspecified), Mold Release Agent

Flexural Modulus: 2050.0 - 2050.0 MPa

Zytel® 158L NC010 is an intermediate viscosity, lubricated polyamide 612 resin that is suitable for molding and extrusion applications.