Company logo

Products

DuPont
Search:
118 products found on DuPont
Matching Product Categories
Elastomers
Plastics
Ready-to-Use Products
End Uses: Medical/Healthcare Applications
With TDS
Liveo™ Biomedical Grade Hcr Q7-4735 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4735

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Enhanced Tear Resistant, Non Blooming, High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency

Tear Strength: 35.0 - 35.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Liveo™ Pharma 50 Tubing product card banner

DuPont

Liveo™ Pharma 50 Tubing

Polymer Name: Silicone Elastomer

Physical Form: Tube

Features: Hydrophobic, Excellent Flexibility, Good Thermal Stability, Easily Sterilized, High Resilience, Consistent Performance, Low Emissions, Complete Traceability, Low Extractables, Rigorous Change Control

End Uses: Tubing, Medical/Healthcare Applications, Medical Devices

Tensile Strength: 90.0 - 90.0 MPa

Liveo™ Pharma 50 Tubing is Pharmaceutical grade silicone tubing for transferring of ultra-pure liquids, air or steam in pharmaceutical and biotechnological manufacturing processes. Designed for applications that require the transfer of high purity fluids where contamination is a concern like filling lines.

Liveo™ Class Vi Elastomers C6-180 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-180 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135. C6-150, C6-165. C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Liveo™ Class Vi Elastomers C6-150 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-150 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Crastin® Sc193 Nc010 product card banner

DuPont

Crastin® SC193 NC010

Polymer Name: PBT/SAN Alloy

Processing Methods: Injection Molding

Density: 1440.0 - 1440.0 kg/m³

Crastin® SC193 NC010 (Complete Data) is a 30% Glass Reinforced Polybutylene Terephthalate Blend Developed for Healthcare Industry

Liveo™ 7-9600 Soft Filling Elastomer Parts A & B product card banner

DuPont

Liveo™ 7-9600 Soft Filling Elastomer Parts A & B

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices

Features: Pigmentable, Low Viscosity, Good Processability, Solventless, Good Colorability

Soft silicone elastomer for producing cohesive and soft feeling medical device parts.

Liveo™ Class Vi Elastomers C6-165 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-165 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Liveo™ Biomedical Grade Hcr Q7-4750 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4750

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming

Tear Strength: 46.0 - 46.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Liveo™ Qp1-250 Liquid Silicone Rubber Kit product card banner

DuPont

Liveo™ QP1-250 Liquid Silicone Rubber Kit

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding, Liquid Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Consistent High Quality, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions, Non Blooming

Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.

Liveo™ Mdx4-4210 product card banner

DuPont

Liveo™ MDX4-4210

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding

End Uses: Prototyping, Medical/Healthcare Applications, Medical Devices, Mold Making

Features: Non Blooming, Translucent, Low Warpage, Consistent High Quality, Pourable, Pigmentable, Low Emissions, Good Thick Section Cure, Excellent Dielectric Properties

Liveo™ MDX4-4210 BioMedical Grade Elastomer is a pourable two- component product which, when combined, cures to a translucent silicone rubber over several hours at room temperatures, but may be more rapidly cured by application of heat.

Liveo™ Biomedical Grade Lsr Q7-4840 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4840

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed

Liveo™ Bio Medical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Liveo™ Pharma Advanced Pump Tubing product card banner

DuPont

Liveo™ Pharma Advanced Pump Tubing

Polymer Name: Silicone Elastomer

Physical Form: Tube

Features: Contamination Protection, Superior Resiliency, Hydrophobic, Excellent Flexibility, Durable, Tear Resistance, Easily Sterilized, Excellent Filling Accuracy, Consistent Performance, Complete Traceability, Low Extractables, Rigorous Change Control

End Uses: Tubing, Medical/Healthcare Applications, Medical Devices

Tensile Strength: 8.9 - 8.9 MPa

Liveo™ Pharma Advanced Pump Tubing is a Translucent pharmaceutical grade silicone tubing designed for pumping of ultrapure liquids in pharmaceutical and biotechnological manufacturing processes. Made from biomedical grade tear resistant platinum-cured elastomer. Liveo™ Pharma Advanced Pump Tubing used in peristaltic pumps where durability is required. DuPont Advanced Pump Tubing offers up to four times the pump life of standard platinum cure silicone tubing.

Tpsiv® 4000-75a Sr product card banner

DuPont

TPSiV® 4000-75A SR

Polymer Name: Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR by DuPont is comprised of Thermoplastic Vulcanizate. It is commonly used It is available in Pellets form.

Liveo™ Biomedical Grade Lsr 7-4870 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-4870

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Liveo™ BioMedical Grade LSR 7-4870 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.

Zytel® Lc6601 Nc010 product card banner

DuPont

Zytel® LC6601 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding, Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion

Flexural Modulus: 800.0 - 800.0 MPa

Zytel® LC6601 NC010 by DuPont is comprised of Polyamide 612. It is commonly used It is available in Pellets form.

Delrin® Pc652 Nc010 product card banner

DuPont

Delrin® PC652 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® PC652 is a medium viscosity acetal homopolymer, with an advanced system of lubricants. It is developed for parts requiring low wear, low friction and low squeak noise for the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and US FDA drug and device master files (DMF and MAF) have been established.

Liveo™ Biomedical Grade Lsr Q7-4850 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4850

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Autoclaved, Platinum Catalyzed, High Gas Permeability

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion. Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Liveo™ Biomedical Grade Lsr Q7-4870 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4870

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Autoclaved, Platinum Catalyzed, High Gas Permeability

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Hytrel® Sc969 Nc010 product card banner

DuPont

Hytrel® SC969 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Pumps, Drug Delivery Pens, Wound Dressings, Prosthetics, Medical/Healthcare Applications, Fluid Handling, Valves, Surgical Instruments

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® SC969 NC010 is a medium modulus grade with nominal hardness of 63D, contains a non-discoloring stabilizer and can be processed by various thermoplastic processing techniques. Developed for applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Zytel® Sc310 Nc010 product card banner

DuPont

Zytel® SC310 NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Zytel® SC310 NC010 is a lubricated polyamide 66 resin for injection molding. It has been developed for consideration into applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Liveo™ Biomedical Grade Lsr 7-4860 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-4860

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Liveo™ BioMedical Grade LSR 7-4860 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.

Liveo™ Qp1-70 Liquid Silicone Rubber Kit product card banner

DuPont

Liveo™ QP1-70 Liquid Silicone Rubber Kit

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding, Liquid Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions, Peroxide-free

Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.

Delrin® Pc690 Nc010 product card banner

DuPont

Delrin® PC690 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® PC690 is a low viscosity acetal homopolymer, developed for thin-walled parts requiring high precision molding in the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and US FDA drug and device master files (DMF and MAF) have been established.

Liveo™ Class Vi Elastomers C6-570 Lsr product card banner

DuPont

Liveo™ Class VI Elastomers C6-570 LSR

Polymer Name: Silicone Elastomer

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, Platinum Catalyzed, High Gas Permeability, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming

Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.

Liveo™ Biomedical Grade Hcr Q7-4780 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4780

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming

Tear Strength: 26.0 - 26.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Liveo™ Biomedical Grade Hcr Q7-4765 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4765

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Non Blooming, Improved Tear Resistance, Pigmentable, Low Emissions, High Gas Permeability

Tear Strength: 39.0 - 39.0 kN/m

Liveo™ BioMedical Grade ETR Elastomers (Q7-series) are a series of two-part, enhanced-tearresistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Delrin® Sc699 Nc010 product card banner

DuPont

Delrin® SC699 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® SC699 is a silicone lubricated low viscosity acetal homopolymer, developed for thin-walled parts requiring low wear and low friction and high precision molding in the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Liveo™ Pharma 80 Tubing product card banner

DuPont

Liveo™ Pharma 80 Tubing

Polymer Name: Silicone Elastomer

Physical Form: Tube

Features: Contamination Protection, Hydrophobic, Kink Resistant, Excellent Flexibility, Good Thermal Stability, Easily Sterilized, High Resilience, Consistent Performance, Complete Traceability, Low Extractables, Rigorous Change Control

End Uses: Tubing, Medical/Healthcare Applications, Medical Devices

Tensile Strength: 70.0 - 70.0 MPa

Liveo™ Pharma 80 Tubing is a Pharmaceutical grade silicone tubing for transferring of ultra-pure liquids, air or steam in pharmaceutical and biotechnological manufacturing processes. Designed for applications that require the transfer of high purity fluids where contamination is a concern like filling lines. Cost effective alternative to reinforced tubing for moderate to high pressure or vacuum applications.

Zytel® Lcpa Fg158 Nc010 product card banner

DuPont

Zytel® LCPA FG158 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding, Extrusion, Coating

Zytel® LCPA FG158 NC010 by DuPont is comprised of Polyamide 612. It is commonly used Zytel® LCPA FG158 NC010 is certified as EFfCI GMP Certified. It is available in Pellets form.

Liveo™ C6-750 Lsr product card banner

DuPont

Liveo™ C6-750 LSR

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Autoclaved, Solventless, Consistent High Quality, High Gas Permeability, Platinum Catalyzed, Good Colorability, Can be post cured, Good Thermal Stability, Pigmentable, Fast Curing, Non Blooming

Liveo™ C6-740 Liquid Silicone Rubber, Liveo™ C6-750 Liquid Silicone Rubber, and Liveo™ C6-770 Liquid Silicone Rubber materials are two-part platinum-catalysed silicone elastomers specifically designed for liquid injection molding.

Hytrel® Sc976 Nc010 product card banner

DuPont

Hytrel® SC976 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cosmetic Packaging, Pumps, Drug Delivery Pens, Wound Dressings, Prosthetics, Medical/Healthcare Applications, Thermoforming Applications, Fluid Handling, Valves, Surgical Instruments

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® SC976 NC010 is a high modulus grade with nominal hardness of 72D, contains a non-discoloring stabilizer and can be processed by various thermoplastic processing techniques. Developed for applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Liveo™ Class Vi Elastomers C6-540 Lsr product card banner

DuPont

Liveo™ Class VI Elastomers C6-540 LSR

Polymer Name: Silicone Elastomer

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, High Gas Permeability, Platinum Catalyzed, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming

Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.

Liveo™ Qp1-50 Silicone Elastomer product card banner

DuPont

Liveo™ QP1-50 Silicone Elastomer

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding, Calendering, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Solventless, Good Colorability, High Consistency, Can be post cured, Pigmentable, Low Emissions, Tissue Culture Testing Warranted, Translucent

Liveo™ QPI Silicone Elastomers are a one-part high consistency rubber base which is supplied absent any catalyst.

Liveo™ Qp1-30 Silicone Elastomer product card banner

DuPont

Liveo™ QP1-30 Silicone Elastomer

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding, Calendering, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Solventless, Good Colorability, Can be post cured, Pigmentable, Low Emissions, Tissue Culture Testing Warranted, Translucent

Liveo"' QPI Silicone Elastomers are a one-part high consistency rubber base which is supplied absent any catalyst.

Liveo™ Class Vi Elastomers C6-250 product card banner

DuPont

Liveo™ Class VI Elastomers C6-250

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Blendable

Liveo™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.

Liveo™ Class Vi Elastomers C6-235 product card banner

DuPont

Liveo™ Class VI Elastomers C6-235

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Blendable

Live™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.