

DuPont
Hytrel® 6356
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1220.0 - 1220.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 290.0 - 290.0 MPa
Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.


DuPont
Hytrel® 7246
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding
End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord
Density: 1260.0 - 1260.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 550.0 - 550.0 MPa
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.


DuPont
Hytrel® 5556
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 190.0 - 190.0 MPa
Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.


DuPont
Hytrel® 8238
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1280.0 - 1280.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 1150.0 - 1150.0 MPa
Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.


DuPont
Crastin® ST820 BK503
Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester
Processing Methods: Injection Molding, Extrusion, Coating, Sheet, Plaques & Profiles Extrusion
Flexural Modulus: 1500.0 - 1500.0 MPa
Crastin® ST820 BK503 is an unreinforced, Super Tough polybutylene terephthalate resin for injection molding.


DuPont
Hytrel® 4068FG
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Corrugated Pipe, Film, Thermoforming Applications, Tubing, Wire & Cable Applications
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 47.0 - 47.0 MPa
Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.


DuPont
Zytel® E51HSB NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding, Coating
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 - 2800.0 MPa
Zytel® E51HSB NC010 is a high molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion.


DuPont
Hytrel® G4774
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Wire & Cable Applications, Jacketing, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 200.0 - 200.0 %
Flexural Modulus: 111.0 - 111.0 MPa
Hytrel® G4774 is a medium modulus grade with nominal hardness of 47D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications: Hose and tubing, wire and cable jackets, film and sheeting, profiles and molded products. Not suited for light-colored finished products.


DuPont
Hytrel® 7246HS NC010
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications
Density: 1250.0 - 1250.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 500.0 - 500.0 MPa
Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.


DuPont
Hytrel® 4068
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 45.0 - 45.0 MPa
Hytrel® 4068 is a low modulus Hytrel® grade with nominal durometer hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:Molded products, hose and tubing, wire and cable jackets, film and sheeting, belting and seals.


DuPont
Crastin® SK605 BK851
Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester
Processing Methods: Injection Molding, Extrusion
Fillers Included: Glass Fiber
Flexural Modulus: 9000.0 - 9000.0 MPa
Crastin® SK605 BK851 is a 30% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.


DuPont
Hytrel® 5555HS
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Wire & Cable Applications
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 195.0 - 195.0 MPa
Hytrel® 5555HS is a medium modulus Hytrel® grade, with nominal durometer hardness of 55D. It is a specially stabilized version of Hytrel® 5556 for superior heat and oil resistance properties.Typical applications:Parts with increased heat-ageing stability and oil and grease resistance such as tubing and hose, wire and cable jackets, film and sheeting, belting. Precautions:Contains a discoloring antioxidant. Not suited for light-colored finished products.


DuPont
Hytrel® HTR8441 BK316
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Blow Molding, Injection Molding, Extrusion
End Uses: Cosmetic Packaging, Pipes, Automotive Applications, Air Ducts, Containers, Bottles, Film, Automotive Air Management Line, Cast Films, Hoses
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 190.0 - 190.0 MPa
Hytrel® HTR8441 is a 55 nom. Shore D thermoplastic polyester elastomer for blow molding. It provides good mechanical properties at high temperature.


DuPont
Hytrel® HTR8163HVBK
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Extrusion, Injection Molding
End Uses: Hoses, Pipes, Tubing, Automotive Applications, Corrugated Pipe, Wire & Cable Applications
Density: 1230.0 - 1230.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 350.0 - 350.0 MPa
Hytrel® HTR8163HVBK is a 65 nom. Shore D, heat stabilized, plasticiser free high performance resin for extrusion; low temperature impact, excellent heat ageing, fatigue and crack propagation resistance; for air brake tubes.


DuPont
Hytrel® G5544
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1220.0 - 1220.0 kg/m³
Strain at Break: 290.0 - 290.0 %
Flexural Modulus: 190.0 - 190.0 MPa
Hytrel® G5544 is a medium modulus grade with nominal hardness of 55D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, profiles, molded and extruded consumer products. Not suited for light-colored finished products.


DuPont
Hytrel® HTR4275 BK316
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Blow Molding, Injection Molding, Extrusion
End Uses: Hoses, Cosmetic Packaging, Crates, Pipes, Automotive Applications, Air Ducts, Containers, Bottles, Automotive Boots, Film, Automotive Air Management Line, Thermoforming Applications, Tubing, Cast Films
Density: 1170.0 - 1170.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 160.0 - 160.0 MPa
Hytrel® HTR4275 BK316 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 55D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.Typical applications:Hollow thin wall parts requiring a tough polymer with excellent flexibility and temperature properties such as automotive boots.


DuPont
Hytrel® 7246HS BK320
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications
Density: 1250.0 - 1250.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 510.0 - 510.0 MPa
Hytrel® 7246HS BK320 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.


DuPont
Hytrel® HTR8241
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Coating, Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding
End Uses: Hoses, Appliances, Pipes, Office Automation Equipment
Density: 1240.0 - 1240.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 360.0 - 360.0 MPa
Hytrel® HTR8241 is a 65 Shore D High Performance Polyester Elastomer Developed for Extrusion


DuPont
Crastin® SK608 BK509
Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester
Processing Methods: Injection Molding, Extrusion
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent
Flexural Modulus: 13300.0 - 13300.0 MPa
Crastin® SK608 BK509 is a 45% glass fiber reinforced, lubricated, black polybutylene terephthalate resin for injection molding.


DuPont
Hytrel® HTR6108
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Coating, Film Extrusion, Thermoforming, Blow Molding, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Film, Thermoforming Applications, Tubing
Density: 1250.0 - 1250.0 kg/m³
Strain at Break: 290.0 - 290.0 %
Flexural Modulus: 170.0 - 170.0 MPa
Hytrel® HTR6108 is a 61 Shore D High Performance Polyester Elastomer with Low Permeability to Fuels and Oils


DuPont
Tedlar® TMR10SM3 E
Polymer Name: Polyvinyl Fluoride (PVF)
Physical Form: Film
Features: Long Term Protection, Fatigue Resistant, Good Elongation, Good Printability, Good Color Stability, Photolytic Degradation Resistant, Low Toxicity, Good Processability, Alkali Resistant, Excellent Long Term Heat Aging Properties, Crack Resistant, Solvent Resistant, Excellent Dielectric Properties, Acid Resistant, Excellent Formability, Cleanable, Durable, Bacteria Resistant, Heat Sealable, Low VOC, Excellent UV Stability, Flexible, High Dielectric Strength, Flame Resistant, Good Surface Finish, Corrosion Resistant, Good Weather Stability, Mildew Resistant, High Temperature Resistance, High Gas Permeability, Sound Transmitting, Microbe Resistant, Medium Gloss, Chemical Resistant, Good Stain Resistance
Tensile Modulus: 2100.0 - 2600.0 MPa
Color: Custom
Tedlar® is a DuPont registered trademark for a highly versatile polyvinyl fluoride (PVF) film that provides a long-lasting finish to a wide variety of surfaces exposed to harsh environments; while its inert, non-stick properties make it an excellent release film.


DuPont
MULTIBASE™ BY27-009
Function: Release Agent
Compatible Polymers & Resins: Polybutylene Terephthalate (PBT)
Carrier: Resin-based, Polybutylene Terephthalate (PBT)
Features: Fast Production Cycle, Low Wear, Low Friction
DuPont MULTIBASE™ BY27-009 Masterbatch is a pelletized formulation containing 50% of an ultra-high molecular weight (UHMW) siloxane polymer. The DuPont MULTIBASE™ MB Series Masterbatches address these problems by supplying a high concentration of an ultra-high molecular weight (UHMW) siloxane as dispersion in a dry pellet form in a variety of thermoplastics.


DuPont
MULTIBASE™ BY27-004
Function: Release Agent
Compatible Polymers & Resins: Polystyrenes (PS)
Carrier: Polystyrenes (PS), Resin-based
Features: Fast Production Cycle, Low Wear, Low Friction
DuPont MULTIBASE™ BY27-004 Masterbatch is a pelletized formulation containing 50% of an ultra-high molecular weight (UHMW) siloxane polymer. The DuPont MULTIBASE™ MB Series Masterbatches address these problems by supplying a high concentration of an ultra-high molecular weight (UHMW) siloxane as dispersion in a dry pellet form in a variety of thermoplastics.


DuPont
Crastin® SK605LM BK591
Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent
Crastin® SK605LM BK591 is a 30% Glass Reinforced, Laser Markable, Polybutylene Terephthalate


DuPont
Tedlar® TGY15BL3
Polymer Name: Polyvinyl Fluoride (PVF)
Physical Form: Film
Features: Long Term Protection, Fatigue Resistant, Good Elongation, Good Printability, Good Color Stability, Photolytic Degradation Resistant, Low Toxicity, Good Processability, Alkali Resistant, Excellent Long Term Heat Aging Properties, Crack Resistant, Solvent Resistant, Good Abrasion Resistance, Excellent Dielectric Properties, Acid Resistant, Excellent Formability, Cleanable, Durable, Bacteria Resistant, Heat Sealable, Low Gloss, Low VOC, Excellent UV Stability, Flexible, High Dielectric Strength, Flame Resistant, Good Surface Finish, Corrosion Resistant, Good Weather Stability, Mildew Resistant, Excellent Salt Spray Resistance, High Temperature Resistance, High Gas Permeability, Sound Transmitting, Microbe Resistant, Chemical Resistant, Good Stain Resistance
Tensile Modulus: 2100.0 - 2600.0 MPa
Color: Custom
DuPont™ Tedlar® protective film helps extend the look and life of your design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.


DuPont
Tedlar® TCP10BG3
Polymer Name: Polyvinyl Fluoride (PVF)
Physical Form: Film
Features: Long Term Protection, Fatigue Resistant, Good Elongation, Good Printability, Good Color Stability, Photolytic Degradation Resistant, Low Toxicity, Good Processability, Alkali Resistant, Excellent Long Term Heat Aging Properties, Crack Resistant, Solvent Resistant, Good Abrasion Resistance, Excellent Dielectric Properties, Acid Resistant, Excellent Formability, Cleanable, Durable, Glossy Surface Aspects, Bacteria Resistant, Heat Sealable, Low VOC, Excellent UV Stability, Flexible, High Dielectric Strength, Flame Resistant, Good Surface Finish, Corrosion Resistant, Good Weather Stability, Mildew Resistant, Excellent Salt Spray Resistance, High Temperature Resistance, High Gas Permeability, Sound Transmitting, Microbe Resistant, Chemical Resistant, Good Stain Resistance
Tensile Modulus: 2100.0 - 2600.0 MPa
Color: Custom
DuPont™ Tedlar® protective film helps extend the look and life of your design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.


DuPont
MULTIBASE™ BY27-201
Function: Release Agent
Compatible Polymers & Resins: Polypropylenes (PP)
Carrier: Resin-based, Polypropylenes (PP)
Features: Fast Production Cycle, Low Wear, Low Friction
DuPont MULTIBASE™ BY27-201 Masterbatch is a pelletized formulation containing 40% of an ultra-high molecular weight (UHMW) siloxane polymer. The DuPont MULTIBASE™ MB Series Masterbatches address these problems by supplying a high concentration of an ultra-high molecular weight (UHMW) siloxane as dispersion in a dry pellet form in a variety of thermoplastics.


DuPont
MULTIBASE™ BY27-220
Function: Release Agent
Compatible Polymers & Resins: Ethylene Vinyl Acetate (EVA)
Carrier: Ethylene Vinyl Acetate (EVA), Resin-based
Features: Fast Production Cycle, Low Wear, Low Friction
DuPont MULTIBASE™ BY27-220 Masterbatch is a pelletized formulation containing 60% of an ultra-high molecular weight (UHMW) siloxane polymer. The DuPont MULTIBASE™ MB Series Masterbatches address these problems by supplying a high concentration of an ultra-high molecular weight (UHMW) siloxane as dispersion in a dry pellet form in a variety of thermoplastics.


DuPont
MULTIBASE™ BY27-213
Function: Release Agent
Compatible Polymers & Resins: Polyethylenes (PE)
Carrier: Resin-based, Linear Low Density Polyethylene (LLDPE)
Features: Fast Production Cycle, Low Wear, Low Friction
DuPont MULTIBASE™ BY27-213 Masterbatch is a pelletized formulation containing 40% of an ultra-high molecular weight (UHMW) siloxane polymer. The DuPont MULTIBASE™ MB Series Masterbatches address these problems by supplying a high concentration of an ultra-high molecular weight (UHMW) siloxane as dispersion in a dry pellet form in a variety of thermoplastics.


DuPont
Tedlar® TWW10BG3
Polymer Name: Polyvinyl Fluoride (PVF)
Physical Form: Film
Features: Long Term Protection, Fatigue Resistant, Good Elongation, Good Printability, Good Color Stability, Photolytic Degradation Resistant, Low Toxicity, Good Processability, Alkali Resistant, Excellent Long Term Heat Aging Properties, Crack Resistant, Solvent Resistant, Good Abrasion Resistance, Excellent Dielectric Properties, Acid Resistant, Excellent Formability, Cleanable, Durable, Glossy Surface Aspects, Bacteria Resistant, Heat Sealable, Low VOC, Excellent UV Stability, Flexible, High Dielectric Strength, Flame Resistant, Good Surface Finish, Corrosion Resistant, Good Weather Stability, Mildew Resistant, Excellent Salt Spray Resistance, High Temperature Resistance, High Gas Permeability, Sound Transmitting, Microbe Resistant, Chemical Resistant, Good Stain Resistance
Tensile Modulus: 2100.0 - 2600.0 MPa
Color: Custom
DuPont™ Tedlar® protective film helps extend the look and life of your design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.


DuPont
Tedlar® TWH10BS1
Polymer Name: Polyvinyl Fluoride (PVF)
Physical Form: Film
Features: Long Term Protection, Fatigue Resistant, Good Elongation, Good Printability, Good Color Stability, Photolytic Degradation Resistant, Low Toxicity, Good Processability, Alkali Resistant, Excellent Long Term Heat Aging Properties, Crack Resistant, Solvent Resistant, Good Abrasion Resistance, Excellent Dielectric Properties, Acid Resistant, Excellent Formability, Cleanable, Durable, Good Surface Gloss, Bacteria Resistant, Heat Sealable, Low VOC, Excellent UV Stability, Flexible, High Dielectric Strength, Flame Resistant, Good Surface Finish, Corrosion Resistant, Good Weather Stability, Mildew Resistant, Excellent Salt Spray Resistance, High Temperature Resistance, High Gas Permeability, Sound Transmitting, Microbe Resistant, Chemical Resistant, Good Stain Resistance
Tensile Modulus: 2100.0 - 2600.0 MPa
Color: White
DuPont™ Tedlar® protective film helps extend the look and life of your design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.


DuPont
MULTIBASE™ BY27-002
Function: Release Agent
Compatible Polymers & Resins: Polypropylenes (PP)
Carrier: Resin-based, Polyethylenes (PE)
Features: Fast Production Cycle, Low Wear, Low Friction
DuPont MULTIBASE™ BY27-002 Masterbatch is a pelletized formulation containing 50% of an ultra-high molecular weight (UHMW) siloxane polymer. The DuPont MULTIBASE™ MB Series Masterbatches address these problems by supplying a high concentration of an ultra-high molecular weight (UHMW) siloxane as dispersion in a dry pellet form in a variety of thermoplastics.


DuPont
Tedlar® TWH15BL1
Polymer Name: Polyvinyl Fluoride (PVF)
Physical Form: Film
Features: Long Term Protection, Fatigue Resistant, Good Elongation, Good Printability, Good Color Stability, Photolytic Degradation Resistant, Low Toxicity, Good Processability, Alkali Resistant, Excellent Long Term Heat Aging Properties, Crack Resistant, Solvent Resistant, Good Abrasion Resistance, Excellent Dielectric Properties, Acid Resistant, Excellent Formability, Cleanable, Durable, Bacteria Resistant, Heat Sealable, Low Gloss, Low VOC, Excellent UV Stability, Flexible, High Dielectric Strength, Flame Resistant, Good Surface Finish, Corrosion Resistant, Good Weather Stability, Mildew Resistant, Excellent Salt Spray Resistance, High Temperature Resistance, High Gas Permeability, Sound Transmitting, Microbe Resistant, Chemical Resistant, Good Stain Resistance
Tensile Modulus: 2100.0 - 2600.0 MPa
Color: White
DuPont™ Tedlar® protective film helps extend the look and life of your design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.


DuPont
Tedlar® TMG15BL3
Polymer Name: Polyvinyl Fluoride (PVF)
Physical Form: Film
Features: Long Term Protection, Fatigue Resistant, Good Elongation, Good Printability, Good Color Stability, Photolytic Degradation Resistant, Low Toxicity, Good Processability, Alkali Resistant, Excellent Long Term Heat Aging Properties, Crack Resistant, Solvent Resistant, Good Abrasion Resistance, Excellent Dielectric Properties, Acid Resistant, Excellent Formability, Cleanable, Durable, Bacteria Resistant, Heat Sealable, Low Gloss, Low VOC, Excellent UV Stability, Flexible, High Dielectric Strength, Flame Resistant, Good Surface Finish, Corrosion Resistant, Good Weather Stability, Mildew Resistant, Excellent Salt Spray Resistance, High Temperature Resistance, High Gas Permeability, Sound Transmitting, Microbe Resistant, Chemical Resistant, Good Stain Resistance
Tensile Modulus: 2100.0 - 2600.0 MPa
Color: Custom
DuPont™ Tedlar® protective film helps extend the look and life of your design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.


DuPont
Tedlar® THS15BL3
Polymer Name: Polyvinyl Fluoride (PVF)
Physical Form: Film
Features: Long Term Protection, Fatigue Resistant, Good Elongation, Good Printability, Good Color Stability, Photolytic Degradation Resistant, Low Toxicity, Good Processability, Alkali Resistant, Excellent Long Term Heat Aging Properties, Crack Resistant, Solvent Resistant, Good Abrasion Resistance, Excellent Dielectric Properties, Acid Resistant, Excellent Formability, Cleanable, Durable, Bacteria Resistant, Heat Sealable, Low Gloss, Low VOC, Excellent UV Stability, Flexible, High Dielectric Strength, Flame Resistant, Good Surface Finish, Corrosion Resistant, Good Weather Stability, Mildew Resistant, Excellent Salt Spray Resistance, High Temperature Resistance, High Gas Permeability, Sound Transmitting, Microbe Resistant, Chemical Resistant, Good Stain Resistance
Tensile Modulus: 2100.0 - 2600.0 MPa
Color: Custom
DuPont™ Tedlar® protective film helps extend the look and life of your design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.


DuPont
Tedlar® TGY85SL2
Polymer Name: Polyvinyl Fluoride (PVF)
Physical Form: Film
Features: Long Term Protection, Fatigue Resistant, Good Elongation, Good Printability, Good Color Stability, Photolytic Degradation Resistant, Low Toxicity, Good Processability, Alkali Resistant, Excellent Long Term Heat Aging Properties, Crack Resistant, Solvent Resistant, Good Abrasion Resistance, Excellent Dielectric Properties, Acid Resistant, Excellent Formability, Cleanable, Durable, Bacteria Resistant, Heat Sealable, Low Gloss, Low VOC, Excellent UV Stability, Flexible, High Dielectric Strength, Flame Resistant, Good Surface Finish, Corrosion Resistant, Good Weather Stability, Mildew Resistant, Excellent Salt Spray Resistance, High Temperature Resistance, High Gas Permeability, Sound Transmitting, Microbe Resistant, Chemical Resistant, Good Stain Resistance
Tensile Modulus: 2100.0 - 2600.0 MPa
Color: Custom
DuPont™ Tedlar® protective film helps extend the look and life of your design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.