Search:
41 products found on DuPont
Matching Product Categories
Elastomers
End Uses: Thermoforming Applications
With TDS
Hide Blends
With SDS
Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding

End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® 5556 product card banner

DuPont

Hytrel® 5556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.

Hytrel® 4556 product card banner

DuPont

Hytrel® 4556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® 3078 product card banner

DuPont

Hytrel® 3078

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1070.0 - 1070.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 27.0 - 27.0 MPa

Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Hytrel® 5526 product card banner

DuPont

Hytrel® 5526

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Injection Molding

End Uses: Cosmetic Packaging, Appliances, Thermoforming Applications, Automotive Applications, Electrical/Electronic Applications, Office Automation Equipment, Bearings

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 200.0 - 200.0 MPa

Hytrel® 5526 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It is specially recommended for injection molding applications requiring high flow properties.Typical applications:Seals, packing and gaskets; gears and bearings.

Hytrel® 4056 product card banner

DuPont

Hytrel® 4056

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment, Wire & Cable Applications, Hoses

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 60.0 - 60.0 MPa

Hytrel® 4056 is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, beltingand seals,.

Hytrel® G4074 product card banner

DuPont

Hytrel® G4074

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Electrical/Electronic Applications, Cast Films, Wire & Cable Applications, Hoses, General Purpose, Cosmetic Packaging, Appliances, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing

Density: 1180.0 - 1180.0 kg/m³

Strain at Break: 250.0 - 250.0 %

Flexural Modulus: 65.0 - 65.0 MPa

Hytrel® G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, mouldedproducts. Not suited for light-colored finished products.

Hytrel® 5553fg Nc010 product card banner

DuPont

Hytrel® 5553FG NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Extrusion, Film Extrusion, Thermoforming, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding

End Uses: Cosmetic Packaging, Appliances, Non Specific Food Applications, Thermoforming Applications

Density: 1200.0 - 1200.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® 5553FG NC010 is a high performance thermoplastic polyester elastomer developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Hytrel® 4069 product card banner

DuPont

Hytrel® 4069

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Hoses, Belts/Belt Repair, Cosmetic Packaging, Appliances, Automotive Applications, Corrugated Pipe, Film, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 45.0 - 45.0 MPa

Hytrel® 4069 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® 4068fg product card banner

DuPont

Hytrel® 4068FG

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Corrugated Pipe, Film, Thermoforming Applications, Tubing, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 47.0 - 47.0 MPa

Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Hytrel® 60lw product card banner

DuPont

Hytrel® 60LW

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Resin Transfer Molding, Casting, Injection Molding, Compounding, Calendering, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment

Hytrel® 60LW is a Polyester Elastomer Concentrate Developed for Enhancing Abrasion and Wear Resistance

Hytrel® G4774 product card banner

DuPont

Hytrel® G4774

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Wire & Cable Applications, Jacketing, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 200.0 - 200.0 %

Flexural Modulus: 111.0 - 111.0 MPa

Hytrel® G4774 is a medium modulus grade with nominal hardness of 47D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications: Hose and tubing, wire and cable jackets, film and sheeting, profiles and molded products. Not suited for light-colored finished products.

Hytrel® 4068 product card banner

DuPont

Hytrel® 4068

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 45.0 - 45.0 MPa

Hytrel® 4068 is a low modulus Hytrel® grade with nominal durometer hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:Molded products, hose and tubing, wire and cable jackets, film and sheeting, belting and seals.

Hytrel® 7246hs Nc010 product card banner

DuPont

Hytrel® 7246HS NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 500.0 - 500.0 MPa

Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® Htr8223 Bk320 product card banner

DuPont

Hytrel® HTR8223 BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Bellows, Cosmetic Packaging, Automotive Applications, Constant Velocity Joint Boots, Containers, Bottles, Automotive Boots, Automotive Drivetrain, Film, Thermoforming Applications, Tubing, Automotive Bellows

Density: 1130.0 - 1130.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 79.0 - 79.0 MPa

Hytrel® HTR8223 BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 42D.Typical applications:Constant velocity joint boots.

Hytrel® G4078 Nc010 product card banner

DuPont

Hytrel® G4078 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Sporting Goods, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment

Density: 1180.0 - 1180.0 kg/m³

Strain at Break: 220.0 - 220.0 %

Hytrel® G4078 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® Htr8888 Bk190 product card banner

DuPont

Hytrel® HTR8888 BK190

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Extrusion, Thermoforming, Blow Molding, Injection Molding

End Uses: Cosmetic Packaging, Automotive Air Management Line, Thermoforming Applications, Automotive Applications, Air Ducts

Strain at Break: 3001.0 - 3001.0 %

Flexural Modulus: 207.0 - 207.0 MPa

Hytrel® HTR8888 BK190 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 55D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.Typical applications:Hollow thin wall parts requiring a tough polymer with excellent flexibility and temperature properties such as automotive boots.

Hytrel® Htr8139bk product card banner

DuPont

Hytrel® HTR8139BK

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Blow Molding, Injection Molding

End Uses: Cosmetic Packaging, Film, Thermoforming Applications, Tubing, Automotive Applications, Containers, Bottles

Density: 1150.0 - 1150.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® HTR8139BK is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 44D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.Typical applications:Constant velocity joint boots.

Hytrel® 5555hs product card banner

DuPont

Hytrel® 5555HS

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Wire & Cable Applications

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 195.0 - 195.0 MPa

Hytrel® 5555HS is a medium modulus Hytrel® grade, with nominal durometer hardness of 55D. It is a specially stabilized version of Hytrel® 5556 for superior heat and oil resistance properties.Typical applications:Parts with increased heat-ageing stability and oil and grease resistance such as tubing and hose, wire and cable jackets, film and sheeting, belting. Precautions:Contains a discoloring antioxidant. Not suited for light-colored finished products.

Hytrel® G5544 product card banner

DuPont

Hytrel® G5544

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Wire & Cable Applications, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 290.0 - 290.0 %

Flexural Modulus: 190.0 - 190.0 MPa

Hytrel® G5544 is a medium modulus grade with nominal hardness of 55D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, profiles, molded and extruded consumer products. Not suited for light-colored finished products.

Hytrel® Sc976 Nc010 product card banner

DuPont

Hytrel® SC976 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cosmetic Packaging, Pumps, Drug Delivery Pens, Wound Dressings, Prosthetics, Medical/Healthcare Applications, Thermoforming Applications, Fluid Handling, Valves, Surgical Instruments

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® SC976 NC010 is a high modulus grade with nominal hardness of 72D, contains a non-discoloring stabilizer and can be processed by various thermoplastic processing techniques. Developed for applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Hytrel® Htr4275 Bk316 product card banner

DuPont

Hytrel® HTR4275 BK316

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Blow Molding, Injection Molding, Extrusion

End Uses: Hoses, Cosmetic Packaging, Crates, Pipes, Automotive Applications, Air Ducts, Containers, Bottles, Automotive Boots, Film, Automotive Air Management Line, Thermoforming Applications, Tubing, Cast Films

Density: 1170.0 - 1170.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 160.0 - 160.0 MPa

Hytrel® HTR4275 BK316 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 55D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.Typical applications:Hollow thin wall parts requiring a tough polymer with excellent flexibility and temperature properties such as automotive boots.

Hytrel® Htr8341c Bk320 product card banner

DuPont

Hytrel® HTR8341C BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Bellows, Cosmetic Packaging, Automotive Applications, Constant Velocity Joint Boots, Containers, Bottles, Automotive Boots, Automotive Drivetrain, Film, Thermoforming Applications, Tubing, Automotive Bellows

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 80.0 - 80.0 MPa

Hytrel® HTR8341C BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 40D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer. It shows excellent mechanical properties at elevated temperatures, superior fatigue, abrasion, and grease resistance.

Hytrel® 7246hs Bk320 product card banner

DuPont

Hytrel® 7246HS BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 510.0 - 510.0 MPa

Hytrel® 7246HS BK320 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® Htr8341g Bk320 product card banner

DuPont

Hytrel® HTR8341G BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Automotive Applications, Containers, Bottles, Thermoforming Applications

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 80.0 - 80.0 MPa

Hytrel® HTR8341G BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 40D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer. It shows excellent mechanical properties at elevated temperatures, superior fatigue, abrasion, and grease resistance.

Hytrel® Pc945 Nc010 product card banner

DuPont

Hytrel® PC945 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Pumps, Drug Delivery Pens, Wound Dressings, Prosthetics, Medical/Healthcare Applications, Thermoforming Applications, Fluid Handling, Valves, Surgical Instruments

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 64.0 - 64.0 MPa

Hytrel® PC945 is a low modulus grade with nominal durometer hardness of 40D. It contains a non-discoloring stabilizer and is recommended for injection and extrusion. It is developed for applications such as parts for the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and FDA drug and device master files (DMF and MAF) have been established.

Hytrel® Rs 40f5 Nc010 product card banner

DuPont

Hytrel® RS 40F5 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Calendering, Extrusion, Film Extrusion, Thermoforming, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding

End Uses: Cosmetic Packaging, Thermoforming Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 50.0 - 50.0 MPa

Hytrel® RS 40F5 NC010 is a low modulus grade containing at least 50% renewably sourced ingredients by weight. It can be processed by many conventional thermoplastic processing techniques such as injection molding and extrusion.

Hytrel® Htr6108 product card banner

DuPont

Hytrel® HTR6108

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Film Extrusion, Thermoforming, Blow Molding, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cast Films, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Film, Thermoforming Applications, Tubing

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 290.0 - 290.0 %

Flexural Modulus: 170.0 - 170.0 MPa

Hytrel® HTR6108 is a 61 Shore D High Performance Polyester Elastomer with Low Permeability to Fuels and Oils

Hytrel® 4056p product card banner

DuPont

Hytrel® 4056P

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Rotational Molding, Coextrusion, Injection Molding

End Uses: Film, Cosmetic Packaging, Thermoforming Applications, Tubing, Wire & Cable Applications

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 64.0 - 64.0 MPa

Hytrel® 4056P is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It is delivered in a powder form.

Hytrel® 4053fg Nc010 product card banner

DuPont

Hytrel® 4053FG NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Non Specific Food Applications, Film, Thermoforming Applications

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® 4053FG is a low modulus high performance thermoplastic elastomer developed for applications in contact with food. It is suitable for extrusion and injection molding processes.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, belting and seals.

Hytrel® Pc938 Nc010 product card banner

DuPont

Hytrel® PC938 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Blow Molding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding, Coating

End Uses: Drug Delivery Pens, Prosthetics, Industrial Applications, Furniture, Sporting Goods, Fluid Handling, Electrical/Electronic Applications, Valves, Cosmetic Packaging, Appliances, Automotive Applications, Power/Other Tools, Pumps, Wound Dressings, Medical/Healthcare Applications, Thermoforming Applications, Consumer Applications, Surgical Instruments

Density: 1070.0 - 1070.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® PC938 has a very low modulus, nominal hardness of 30D, containing non-discoloring stabilizer. Processed by thermoplastic processing techniques like injection molding and extrusion. Developed for applications such as parts for the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and FDA drug and device master files (DMF and MAF) have been established.

Hytrel® Htr8068 product card banner

DuPont

Hytrel® HTR8068

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Film, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Cast Films, Wire & Cable Applications, Jacketing

Density: 1430.0 - 1430.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 155.0 - 155.0 MPa

Hytrel® HTR8068 is a medium modulus flame retardant and antidrip Hytrel® resin that meets the requirement of UL94 V-0. It has nominal

Hytrel® Pc966 Nc010 product card banner

DuPont

Hytrel® PC966 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cosmetic Packaging, Pumps, Drug Delivery Pens, Wound Dressings, Prosthetics, Medical/Healthcare Applications, Thermoforming Applications, Fluid Handling, Valves, Surgical Instruments

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® PC966 NC010 is a medium modulus grade with nominal durometer hardness of 63D. It contains a non-discoloring stabilizer and is recommended for injection and extrusion. It is developed for applications such as parts for the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and FDA drug and device master files (DMF and MAF) have been established.

Hytrel® 6646 Nc010 product card banner

DuPont

Hytrel® 6646 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Extrusion, Film Extrusion, Thermoforming, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding

End Uses: Cosmetic Packaging, Appliances, Thermoforming Applications

Density: 1230.0 - 1230.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® 6646 is a medium modulus grade with nominal hardness of 66D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.