Company logo
supplier

DuPont

Healthcare & Pharma
120 products found on DuPont DuPont products found for View all Healthcare & Pharmaon Knowde
Plastics & Elastomers Processing Methods: Extrusion
With TDS
Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Applications: Non-Food Consumer Packaging, Consumer Electronics, Industrial Automation

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Cosmetic Packaging, Appliances, Sporting Goods

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Hytrel® 7246 product card banner

DuPont

Hytrel® 7246

Applications: Automotive Electronics, Electrical & Electronic Systems, Food & Beverage Packaging

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Signal Cord, EV Charger, Cosmetic Packaging

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Hytrel® 4556 product card banner

DuPont

Hytrel® 4556

Applications: Non-Food Consumer Packaging, Equipment & Parts, Consumer Electronics

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Film, Crates, Containers

Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Hytrel® 5556 product card banner

DuPont

Hytrel® 5556

Applications: Non-Food Consumer Packaging, Consumer Electronics, Industrial Automation

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Cosmetic Packaging, Appliances, Sporting Goods

Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.

Hytrel® 3078 product card banner

DuPont

Hytrel® 3078

Applications: Food & Beverage Packaging, Non-Food Consumer Packaging, Consumer Electronics

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Cosmetic Packaging, Appliances, Office Automation Equipment

Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Applications: Food & Beverage Packaging, Non-Food Consumer Packaging, Consumer Electronics

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Cosmetic Packaging, Appliances, Sporting Goods

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Delrin® 500t Bk602 product card banner

DuPont

Delrin® 500T BK602

Applications: Tubing & Fluids Handling, Other Consumer Goods Applications, Appliances & Electronics

Product Families: Polyacetals

Polymer Name: Polyacetal Homopolymer (POM)

End Uses: Safety Helmets, Fasteners, Automotive Applications

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Hytrel® G4074 product card banner

DuPont

Hytrel® G4074

Applications: Food & Beverage Packaging, Non-Food Consumer Packaging, Tubing & Fluids Handling

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Cosmetic Packaging, Appliances, Electrical/Electronic Applications

Hytrel® G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, mouldedproducts. Not suited for light-colored finished products.

Delrin® 100st Bk602 product card banner

DuPont

Delrin® 100ST BK602

Applications: Tubing & Fluids Handling, Other Consumer Goods Applications, Appliances & Electronics

Product Families: Polyacetals

Polymer Name: Polyacetal Homopolymer (POM)

End Uses: Safety Helmets, Automotive Applications, Fasteners

Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.

Liveo™ Class Vi Elastomers C6-180 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-180 Parts A & B

Applications: Implants & Prosthetics, Medical Devices & Assemblies, Other Medical Applications

Product Families: Silicone Elastomers

Chemical Family: Silicones

Polymer Name: Silicone Elastomer

End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications

Liveo™ Class VI Elastomers (C6-135. C6-150, C6-165. C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Liveo™ Class Vi Elastomers C6-150 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-150 Parts A & B

Applications: Implants & Prosthetics, Medical Devices & Assemblies, Other Medical Applications

Product Families: Silicone Elastomers

Chemical Family: Silicones

Polymer Name: Silicone Elastomer

End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Delrin® 100st Nc010 product card banner

DuPont

Delrin® 100ST NC010

Applications: Tubing & Fluids Handling, Other Consumer Goods Applications, Appliances & Electronics

Product Families: Polyacetals

Polymer Name: Polyacetal Homopolymer (POM)

End Uses: Fasteners, Automotive Applications, Tubing

Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.

Hytrel® 4068fg product card banner

DuPont

Hytrel® 4068FG

Applications: Non-Food Consumer Packaging, Tubing & Fluids Handling, Other Processing & Packaging Applications

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Film, Cosmetic Packaging, Non Specific Food Applications

Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Hytrel® 4069 product card banner

DuPont

Hytrel® 4069

Applications: Food & Beverage Packaging, Non-Food Consumer Packaging, Equipment & Parts

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Cosmetic Packaging, Appliances, Sporting Goods

Hytrel® 4069 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Zytel® E51hsb Nc010 product card banner

DuPont

Zytel® E51HSB NC010

Applications: Other Consumer Goods Applications, Apparel, Cooling & Climate

Product Families: Polyamides

Chemical Family: Polyamides

Polymer Name: Polyamide 66 (PA 66)

End Uses: Monofilaments, Tubing, Pipes

Zytel® E51HSB NC010 is a high molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion.

Crastin® St820 Bk503 product card banner

DuPont

Crastin® ST820 BK503

Applications: Cooling & Climate, Fuel Systems, Tubing & Fluids Handling

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Thermoplastic Polyester, Polybutylene Terephthalate (PBT)

End Uses: Automotive Applications, Machine/Mechanical Parts, Housings

Crastin® ST820 BK503 is an unreinforced, Super Tough polybutylene terephthalate resin for injection molding.

Liveo™ Class Vi Elastomers C6-165 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-165 Parts A & B

Applications: Implants & Prosthetics, Medical Devices & Assemblies, Other Medical Applications

Product Families: Silicone Elastomers

Chemical Family: Silicones

Polymer Name: Silicone Elastomer

End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Hytrel® G4774 product card banner

DuPont

Hytrel® G4774

Applications: Food & Beverage Packaging, Non-Food Consumer Packaging, Tubing & Fluids Handling

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Cosmetic Packaging, Appliances, Electrical/Electronic Applications

Hytrel® G4774 is a medium modulus grade with nominal hardness of 47D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable jackets, film and sheeting, profiles and molded products. Not suited for light-colored finished products.

Hytrel® 7246hs Nc010 product card banner

DuPont

Hytrel® 7246HS NC010

Applications: Food & Beverage Packaging, Non-Food Consumer Packaging, Other Consumer Goods Applications

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Cosmetic Packaging, Automotive Applications, Wire & Cable Applications

Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Zytel® Lcpa 158 Nc010 product card banner

DuPont

Zytel® LCPA 158 NC010

Applications: Other Industrial Applications, Equipment & Parts, Medical Devices & Assemblies

Product Families: Polyamides

Chemical Family: Polyamides

Polymer Name: Polyamide 612 (PA 612)

End Uses: Tubes, Truck Air Brake Tubes, Medical Devices

Zytel® 158 NC010 is an intermediate viscosity polyamide 612 resin.

Liveo™ Biomedical Grade Lsr Q7-4840 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4840

Applications: Implants & Prosthetics, Medical Devices & Assemblies, Other Medical Applications

Product Families: Silicone Elastomers

Chemical Family: Silicones

Polymer Name: Liquid Silicone Rubber (LSR), Silicone Elastomer

End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications

Liveo™ Bio Medical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Hytrel® 4068 product card banner

DuPont

Hytrel® 4068

Applications: Non-Food Consumer Packaging, Consumer Electronics, Industrial Automation

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Cosmetic Packaging, Appliances, Sporting Goods

Hytrel® 4068 is a low modulus Hytrel® grade with nominal durometer hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:Molded products, hose and tubing, wire and cable jackets, film and sheeting, belting and seals.

Tpsiv® 4000-75a Sr product card banner

DuPont

TPSiV® 4000-75A SR

Applications: Appliances & Electronics, Pipes & Hoses, Other Medical Applications

Product Families: Thermoplastic Vulcanizates (TPV)

Polymer Name: Thermoplastic Vulcanizate (TPV)

End Uses: Consumer Applications, Electrical/Electronic Applications, Medical/Healthcare Applications

TPSiV® 4000-75A SR by DuPont is comprised of Thermoplastic Vulcanizate. It is commonly used It is available in Pellets form.

Zytel® Fn718 Bk230a product card banner

DuPont

Zytel® FN718 BK230A

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Polyamides

Chemical Family: Polyamides

Polymer Name: Polyamide 66 (PA 66)

End Uses: Wire & Cable Applications, Tubing

Zytel® FN718 BK230A is a flexible polyamide 66 resin.

Hytrel® Htr8223 Bk320 product card banner

DuPont

Hytrel® HTR8223 BK320

Applications: Non-Food Consumer Packaging, Cooling & Climate, Appliances & Electronics

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Film, Cosmetic Packaging, Containers

Hytrel® HTR8223 BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 42D.Typical applications:Constant velocity joint boots.

Crastin® 6130 Nc010 product card banner

DuPont

Crastin® 6130 NC010

Applications: Non-Food Consumer Packaging, Semiconductor Manufacturing, Equipment & Parts

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polybutylene Terephthalate (PBT)

End Uses: Semiconductor Applications, Sporting Goods, Solar Panels

Crastin® 6130 NC010 is an unreinforced, medium/high viscosity polybutylene terephthalate resin for extrusion and injection molding.

Crastin® Sk605 Bk851 product card banner

DuPont

Crastin® SK605 BK851

Applications: Housings & Enclosures, Cooling & Climate, Appliances & Electronics

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Thermoplastic Polyester, Polybutylene Terephthalate (PBT)

End Uses: Radomes, Radar Housing, Connectors

Crastin® SK605 BK851 is a 30% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.

Liveo™ Biomedical Grade Lsr 7-4870 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-4870

Applications: Other Medical Applications, Medical Devices & Assemblies, Implants & Prosthetics

Product Families: Silicone Elastomers

Chemical Family: Silicones

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications

Liveo™ BioMedical Grade LSR 7-4870 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.

Liveo™ Biomedical Grade Lsr 7-4860 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-4860

Applications: Other Medical Applications, Medical Devices & Assemblies, Implants & Prosthetics

Product Families: Silicone Elastomers

Chemical Family: Silicones

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications

Liveo™ BioMedical Grade LSR 7-4860 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.

Liveo™ Biomedical Grade Lsr Q7-4850 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4850

Applications: Implants & Prosthetics, Medical Devices & Assemblies, Other Medical Applications

Product Families: Silicone Elastomers

Chemical Family: Silicones

Polymer Name: Liquid Silicone Rubber (LSR), Silicone Elastomer

End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion. Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Tpsiv® 3345-65a Natural 25564 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A Natural 25564 Thermoplastic Elastomer

Applications: Equipment & Parts, Interior, Medical Devices & Assemblies

Product Families: Thermoplastic Vulcanizates (TPV)

Chemical Family: Silicones

Polymer Name: Thermoplastic Vulcanizate (TPV), Thermoplastic Silicone Vulcanizate (TPSiV)

End Uses: Electrical Components, Electrical/Electronic Applications, Soft Touch Applications

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Liveo™ Biomedical Grade Lsr Q7-4870 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4870

Applications: Implants & Prosthetics, Medical Devices & Assemblies, Other Medical Applications

Product Families: Silicone Elastomers

Chemical Family: Silicones

Polymer Name: Liquid Silicone Rubber (LSR), Silicone Elastomer

End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Hytrel® Sc969 Nc010 product card banner

DuPont

Hytrel® SC969 NC010

Applications: Wound Care, Tubing & Fluids Handling, Surgical Instruments & Trays

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Drug Delivery Pens, Wound Dressings, Valves

Hytrel® SC969 NC010 is a medium modulus grade with nominal hardness of 63D, contains a non-discoloring stabilizer and can be processed by various thermoplastic processing techniques. Developed for applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Zytel® Lc6601 Nc010 product card banner

DuPont

Zytel® LC6601 NC010

Applications: Other Processing & Packaging Applications, Other Automotive Applications, Other Devices & Assemblies

Product Families: Polyamides

Chemical Family: Polyamides

Polymer Name: Polyamide 612 (PA 612)

End Uses: Automotive Applications, Electrical/Electronic Applications, Medical/Healthcare Applications

Zytel® LC6601 NC010 by DuPont is comprised of Polyamide 612. It is commonly used It is available in Pellets form.

Hytrel® 5555hs product card banner

DuPont

Hytrel® 5555HS

Applications: Non-Food Consumer Packaging, Appliances & Electronics, Tubing & Fluids Handling

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

End Uses: Cosmetic Packaging, Electrical/Electronic Applications, Automotive Applications

Hytrel® 5555HS is a medium modulus Hytrel® grade, with nominal durometer hardness of 55D. It is a specially stabilized version of Hytrel® 5556 for superior heat and oil resistance properties.Typical applications:Parts with increased heat-ageing stability and oil and grease resistance such as tubing and hose, wire and cable jackets, film and sheeting, belting. Precautions:Contains a discoloring antioxidant. Not suited for light-colored finished products.

Tpsiv® 4000-60a Black Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4000-60A Black Thermoplastic Elastomer

Applications: Interior, Medical Devices & Assemblies, Sports & Recreation

Product Families: Thermoplastic Vulcanizates (TPV)

Chemical Family: Silicones

Polymer Name: Thermoplastic Vulcanizate (TPV), Thermoplastic Silicone Vulcanizate (TPSiV)

End Uses: Consumer Applications, Sporting Goods, Soft Touch Applications

TPSiV® 4000-60A SR thermoplastic elastomer is a UV stable material with excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on smartphones, portable electronic cases and wearable electronic devices.