Delrin® 111PA NC010 is a Nucleated High Viscosity Acetal Homopolymer.
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Flexural Modulus: 2900.0 MPa
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
Quote required
Popular DuPont Products
View all DuPont ProductsProduct NameProduct FamiliesApplications
Delrin® 300TE BK602 Polyacetals Other Industrial Applications, Other Consumer Goods Applications, Other Automotive Applications, Sensors & Actuators, Safety Systems
Delrin® 500AL NC010 Polyacetals Other Industrial Applications, Other Consumer Goods Applications, Other Automotive Applications, Powertrain & UTH, Automotive Electronics, Other Devices & Assemblies, Sensors & Actuators, Safety Systems
Delrin® 570 NC000 Polyacetals Other Automotive Applications
TypeDocument Name
Brochure
Technology Profile Laser Welding
Technology Profile Laser Welding
BrochureOther
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
OtherBrochure
DuPont Performance Polymers - Self Tapping Screws
DuPont Performance Polymers - Self Tapping Screws
BrochureOther
Delrin® acetal resin Molding Guide
Delrin® acetal resin Molding Guide
OtherOther
Safety Restraint Systems
Safety Restraint Systems
OtherBrochure
Electrical/Electronic Thermoplastic Encapsulation
Electrical/Electronic Thermoplastic Encapsulation
BrochureOther
DuPont™ Delrin® Drives Productivity and Sustainability for High Speed Filling Lines
DuPont™ Delrin® Drives Productivity and Sustainability for High Speed Filling Lines
OtherOther
Delrin® Design Guide-Module III
Delrin® Design Guide-Module III
OtherOther
Delrin® vs Acetal Copolymer White Paper
Delrin® vs Acetal Copolymer White Paper
OtherTechnical Data Sheet
Delrin® 111PA NC010 Technical Data Sheet
Delrin® 111PA NC010 Technical Data Sheet
Technical Data SheetOther
Delrin® 111PA NC010 Injection Data Sheet
Delrin® 111PA NC010 Injection Data Sheet
OtherKnowde Enhanced TDS
Identification & Functionality
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Applications & Uses
Markets
Applications
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Processing Notes
Injection molding
Drying is recommended, but not necessary for newly opened packaging stored in a dry location.
Follow the drying guidelines above in the following cases
- If moisture is above the Processing Moisture Content recommendation,
- When a resin container is damaged,
- When the material is not properly stored in a dry place at room temperature, or When packaging stays open for a significant time.
Properties
Physical Properties
| Value | Units | Test Method / Conditions | |
| Moulding Shrinkage - Normal | 1.9 | % | ISO 294-4, 2577 |
| Moulding Shrinkage - Parallel | 2.0 | % | ISO 294-4, 2577 |
| Melt Mass Flow Rate - MFR (190°C/2.16 kg) | 2.4 | g/10min | ISO 1133 |
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 3100.0 | MPa | ISO 527-1/-2 |
| Yield Stress | 72.0 | MPa | ISO 527-1/-2 |
| Yield Strain | 19.0 | % | ISO 527-1/-2 |
| Strain at Break (50 mm/min) | 39.0 | % | ISO 527-1/-2 |
| Flexural Modulus | 2900.0 | MPa | ISO 178 |
| Charpy Impact Strength (23°C) | 270.0 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (23°C) | 11.0 | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (-30°C) | 10.0 | kJ/m² | ISO 179/1eA |
| Poisson's Ratio | 0.37 | - | - |
Thermal Properties
| Value | Units | Test Method / Conditions | |
| Melting Temperature (10°C/Min) | 178.0 | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.8 Mpa) | 102.0 | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 Mpa) | 163.0 | °C | ISO 75-1/-2 |
Flammability
| Value | Units | Test Method / Conditions | |
| FMVSS Class | B | - | ISO 3795 (FMVSS 302) |
| Burning Rate (1 mm, Thickness) | max. 80 | mm/min | ISO 3795 (FMVSS 302) |
Other Properties
| Value | Units | Test Method / Conditions | |
| Density | 1420.0 | kg/m³ | ISO 1183 |
Processing Information (Extrusion)
| Value | Units | Test Method / Conditions | |
| Melt Temperature Range | 195 - 205 | °C | - |
| Drying Temperature | 75 - 85 | °C | - |
| Drying Time (Dehumidified Dryer) | 2 .0 - 4 | h | - |
| Processing Moisture Content | ≤ 0.2 | % | - |
| Melt Temperature Optimum | 200.0 | °C | - |
Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Hold Pressure Range | 90 - 110 | MPa | - |
| Hold Pressure Time | 7.5 | s/mm | - |
| Drying Temperature | 80.0 | °C | - |
| Drying Recommended | Yes | - | - |
| Drying Time (Dehumidified Dryer) | 2 .0 - 4 | h | - |
| Processing Moisture Content | ≤ 0.05 | % | - |
| Melt Temperature Optimum | 215.0 | °C | - |
| Min. Melt Temperature | 210.0 | °C | - |
| Max. Melt Temperature | 220.0 | °C | - |
| Mold Temperature Optimum | 90.0 | °C | - |
| Min. Mould Temperature | 80.0 | °C | - |
| Max. Mould Temperature | 100.0 | °C | - |
| Annealing Time - Optional | 30.0 | min/mm | - |
| Annealing Temperature | 160.0 | °C | - |
Delrin® 111PA NC010
DuPont