Delrin® 500AL NC010
Sold by DuPont
Delrin® 500AL is a medium viscosity acetal homopolymer containing an advanced system of lubrication designed for low wear, low friction, and low noise against metals and plastics.
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2800.0 MPa
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
Quote required
Similar Products from DuPont NEW
Knowde Enhanced TDS
Identification & Functionality
Additives Included
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Delrin® 500AL NC010 Features & Benefits
Applications & Uses
Markets
Applications
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Properties
Chemical Resistance
Color
Flame Rating
Part Marking Code
Resin ID
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 3000 | MPa | ISO 527 |
| Hardness, Rockwell | 120 | Scale R | ISO 2039-2 |
| Hardness, Rockwell | 89 | Scale M | ISO 2039-2 |
| Yield Stress | 66 | MPa | ISO 527-1/-2 |
| Yield Strain | 11 | % | ISO 527-1/-2 |
| Nominal Strain at Break | 23 | % | ISO 527-1/-2 |
| Flexural Modulus | 2800 | MPa | ISO 178 |
| Tensile Creep Modulus (1 h) | 2400 | MPa | ISO 899-1 |
| Tensile Creep Modulus (1000 h) | 1600 | MPa | ISO 899-1 |
| Charpy Impact Strength (23°C) | 160 | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (-30°C) | 130 | kJ/m2 | ISO 179/1eU |
| Charpy Notched Impact Strength (23°C) | 7 | kJ/m2 | ISO 179-1/1eA |
| Charpy Notched Impact Strength (-30°C) | 6 | kJ/m2 | ISO 179-1/1eA |
| Izod Notched Impact Strength (23°C) | 6 | kJ/m2 | ISO 180/1A |
| Izod Notched Impact Strength (-40°C) | 5 | kJ/m2 | ISO 180/1A |
| Ball Indentation Hardness (H 358/30) | 192 | MPa | ISO 2039-1 |
| Ball Indentation Hardness (H 961/30) | 170 | MPa | ISO 2039-1 |
| Poisson's Ratio | 0.37 | - | ASTM D638 |
| Coefficient of Sliding Friction (1h, Against Itself) | 0.25 | - | ASTM 1894 |
| Coefficient of Sliding Friction (1h, Against Steel) | 0.5 | - | ASTM 1894 |
Physical Properties
| Value | Units | Test Method / Conditions | |
| Melt Volume - Flow Rate | 12 | cm³/10min | ISO 1133 |
| Load | 2.16 | kg | ISO 1133 |
| Molding Shrinkage - Parallel | 1.8 | % | ISO 294-4, 2577 |
| Molding Shrinkage - Normal | 1.7 | % | ISO 294-4, 2577 |
| Temperature | 190 | °C | ISO 1133 |
Thermal Properties
| Value | Units | Test Method / Conditions | |
| Melting Temperature (10°C/min) | 178 | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load(1.8 MPa) | 97 | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 164 | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion - Parallel | 120 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion - Normal | 120 | E-6/K | ISO 11359-1/-2 |
| Relative Temperature Index - Electrical (0.75 mm) | 50 | °C | UL 746B |
| Relative Temperature Index - Electrical (1.5 mm) | 110 | °C | UL 746B |
| Relative Temperature Index - Electrical (3 mm) | 110 | °C | UL 746B |
| Relative Temperature Index - Impact (0.75 mm) | 50 | °C | UL 746B |
| Relative Temperature Index - Impact (1.5 mm) | 85 | °C | UL 746B |
| Relative Temperature Index - Impact (3 mm) | 90 | °C | UL 746B |
| Relative Temperature Index - Strength (0.75 mm) | 50 | °C | UL 746B |
| Relative Temperature Index - Strength (1.5 mm) | 90 | °C | UL 746B |
| Relative Temperature Index - Strength (3 mm) | 95 | °C | UL 746B |
Flammability
| Value | Units | Test Method / Conditions | |
| Burning Behaviour (1.5 mm, Nominal Thickness) | HB | class | IEC 60695-11-10 |
| Burning Behaviour (Thickness h) | HB | class | IEC 60695-11-10 |
| FMVSS Class | B | - | ISO 3795 (FMVSS 302) |
| Burning Rate (1 mm, Thickness) | 28 | mm/min | ISO 3795 (FMVSS 302) |
| Ul Recognition | Yes | - | UL 94 |
| Thickness Tested | 1.5 | mm | IEC 60695-11-10 |
Other Properties
| Value | Units | Test Method / Conditions | |
| Humidity Absorption (2 mm) | 0.3 | % | Sim. to ISO 62 |
| Density of Melt | 1180 | kg/m³ | - |
| Density | 1390 | kg/m³ | ISO 1183 |
Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Drying Recommended | Yes | - | - |
| Drying Temperature | 80 | °C | - |
| Drying Time (Dehumidified Dryer) | 2.0 - 4.0 | h | - |
| Processing Moisture Content | ≤0.2 | % | - |
| Melt Temperature Optimum | 215 | °C | - |
| Min. Melt Temperature | 210 | °C | - |
| Max. Melt Temperature | 220 | °C | - |
| Mold Temperature Optimum | 90 | °C | - |
| Min. Mold Temperature | 80 | °C | - |
| Max. Mold Temperature | 100 | °C | - |
| Hold Pressure Range | 80 - 100 | MPa | - |
| Hold Pressure Time | 8 | s/mm | - |
| Annealing Time - Optional | 30 | min/mm | - |
| Annealing Temperature | 160 | °C | - |
VDA Properties
| Value | Units | Test Method / Conditions | |
| Emissions | max. 8 | mg/100g/kg/100g | VDA 275 |
Chemical Resistance
| Chemical Type | Chemical Name | Resistance |
| Acids | Acetic Acid (5% by mass) (23°C) | Probably Resistant |
| Acids | Chromic Acid solution (40% by mass) (23°C) | Not Recommended |
| Acids | Citric Acid solution (10% by mass) (23°C) | Not Recommended |
| Acids | Hydrochloric Acid (36% by mass) (23°C) | Not Recommended |
| Acids | Lactic Acid (10% by mass) (23°C) | Not Recommended |
| Acids | Nitric Acid (40% by mass) (23°C) | Not Recommended |
| Acids | Sulfuric Acid (38% by mass) (23°C) | Not Recommended |
| Acids | Sulfuric Acid (5% by mass) (23°C) | Not Recommended |
| Alcohols | Ethanol (23°C) | Probably Resistant |
| Alcohols | Isopropyl alcohol (23°C) | Probably Resistant |
| Alcohols | Methanol (23°C) | Probably Resistant |
| Bases | Ammonium Hydroxide solution (10% by mass) (23°C) | Not Recommended |
| Bases | Sodium Hydroxide solution (1% by mass) (23°C) | Not Recommended |
| Bases | Sodium Hydroxide solution (35% by mass) (23°C) | Not Recommended |
| Ethers | Diethyl ether (23°C) | Probably Resistant |
| Hydrocarbons | iso-Octane (23°C) | Probably Resistant |
| Hydrocarbons | n-Hexane (23°C) | Probably Resistant |
| Hydrocarbons | Toluene (23°C) | Probably Resistant |
| Ketones | Acetone (23°C) | Probably Resistant |
| Mineral oils | Insulating Oil (23°C) | Probably Resistant |
| Mineral oils | SAE 10W40 multigrade motor oil (130°C) | Not Recommended |
| Mineral oils | SAE 10W40 multigrade motor oil (23°C) | Probably Resistant |
| Mineral oils | SAE 80/90 hypoid-gear oil (130°C) | Not Recommended |
| Other | 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) | Probably Resistant |
| Other | 50% Oleic acid + 50% Olive Oil (23°C) | Probably Resistant |
| Other | DOT No. 4 Brake fluid (130°C) | Not Recommended |
| Other | Ethyl Acetate (23°C) | Probably Resistant |
| Other | Ethylene Glycol (50% by mass) in water (108°C) | Not Recommended |
| Other | Hydrogen peroxide (23°C) | Not Recommended |
| Other | Phenol solution (5% by mass) (23°C) | Not Recommended |
| Other | Water (23°C) | Probably Resistant |
| Other | Water (90°C) | Not Recommended |
| Salt solutions | Sodium Carbonate solution (2% by mass) (23°C) | Not Recommended |
| Salt solutions | Sodium Carbonate solution (20% by mass) (23°C) | Not Recommended |
| Salt solutions | Sodium Chloride solution (10% by mass) (23°C) | Probably Resistant |
| Salt solutions | Sodium Hypochlorite solution (10% by mass) (23°C) | Not Recommended |
| Salt solutions | Zinc Chloride solution (50% by mass) (23°C) | Not Recommended |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) | Not Recommended |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (23°C) | Probably Resistant |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (90°C) | Not Recommended |
| Standard Fuels | ISO 1817 Liquid 1 - E5 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 2 - M15E4 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 3 - M3E7 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 4 - M15 (60°C) | Probably Resistant |
| Standard Fuels | Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) | Probably Resistant |
| Standard Fuels | Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) | Probably Resistant |
Regulatory & Compliance
Certifications & Compliance
OEM Standards
Compliance
Technical Details & Test Data
Stress vs Strain
Secant Modulus vs Strain
Packaging & Availability
Country Availability
Regional Availability
Delrin® 500AL NC010
DuPont