Company logo

Delrin® 500CPE NC010

Sold by DuPont
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent
Start Order
Order Quantity
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability

Knowde Enhanced TDS

Expand All


Identification & Functionality

Additives Included
Plastics & Elastomers Functions

Delrin® 500CPE NC010 Features & Benefits

Applications & Uses

Processing Notes

Injection Molding

Drying is recommended, but not necessary for newly opened packaging stored in a dry location.

Follow the drying guidelines above in the following cases

  • If moisture is above the Processing Moisture Content recommendation,
  • When a resin container is damaged,
  • When the material is not properly stored in a dry place at room temperature, or


Physical Form
Mechanical Properties
ValueUnitsTest Method / Conditions
Nominal Strain (at Break)33%ISO 527-1/-2
Flexural Modulus3000MPaISO 178
Flexural Strength93MPaISO 178
Charpy Impact Strength (at 23°C)250kJ/m²ISO 179/1eU
Charpy Impact Strength (at -30°C)340kJ/m²ISO 179/1eU
Notched Charpy Impact Strength (at 23°C)10kJ/m²ISO 179/1eA
Notched Charpy Impact Strength (at -30°C)8kJ/m²ISO 179/1eA
Yield Stress72MPaISO 527-1/-2
Poisson's Ratio0.37--
Tensile Modulus3100MPaISO 527-1/-2
Yield Strain16%ISO 527-1/-2
Thermal Properties
ValueUnitsTest Method / Conditions
Melt Temperature (at 10°C/min)178°CISO 11357-1/-3
Temperature of Deflection Under Load (1.8 Mpa)97°CISO 75-1/-2
ValueUnitsTest Method / Conditions
Burning Behavior (at 1.5mm Nominal Thickness)UL94 HBclassIEC 60695-11-10
Burning Behavior (at 0.8mm Thickness)UL94 HBclassIEC 60695-11-10
FMVSS ClassB-ISO 3795 (FMVSS 302)
Burning Rate (at 1mm Thickness)20mm/minISO 3795 (FMVSS 302)
Other Properties
ValueUnitsTest Method / Conditions
Density of Melt1190kg/m³-
Density1420kg/m³ISO 1183
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Melt Temperature (Optimum)205°C-
Melt Temperature (Minimum)200°C-
Melt Temperature (Maximum)210°C-
Maximum Screw Tangential Speed0.3m/s-
Mold Temperature (Optimum)90°C-
Mold Temperature (Minimum)80°C-
Mold Temperature (Maximum)100°C-
Annealing Time (Optional)30min/mm-
Drying Temperature80°C-
Annealing Temperature160°C-
Drying Time (Dehumidified Dryer)2 - 4h-
Hold Pressure Time8s/mm-
Hold Pressure Range80 - 100MPa-
Drying Recommendedyes--
Processing Moisture Contentmax. 0.2%-
VDA Properties
ValueUnitsTest Method / Conditions
Emissionsmax. 2mg/kgVDA 275
Rheological Properties
ValueUnitsTest Method / Conditions
Melt Volume-Flow Rate (at 190°C, 2.16 kg)13cm³/10minISO 1133
Melt Mass Flow Rate (at 190°C, 2.16 kg)15g/10minISO 1133
Mold Shrinkage (Parallel)2%ISO 294-4, 2577
Mold Shrinkage (Normal)1.9%ISO 294-4, 2577

Regulatory & Compliance

Packaging & Availability

Regional Availability

Delrin® 500CPE NC010