Company logo

Delrin® 500T NC010

Sold by DuPont
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 MPa
Start Order
Secure
Order Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Similar Products from DuPont NEW

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

Delrin® 500T NC010 Features & Benefits

Applications & Uses

Properties

Color
Flame Rating
Physical Form
Part Marking Code
>POM-I<
Resin ID
POM-I
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus2300MPaISO 527
Hardness, Rockwell79Scale MISO 2039-2
Hardness, Rockwell117Scale RASTM D785
Yield Stress55MPaISO 527-1/-2
Yield Strain18%ISO 527-1/-2
Nominal Strain at Break35%ISO 527-1/-2
Flexural Modulus2100MPaASTM D 790
Flexural Stress at 3.5%60MPaISO 178
Tensile Creep Modulus (1 h)2300MPaISO 899-1
Tensile Creep Modulus (1000 h)1200MPaISO 899-1
Charpy Impact Strength (23°C)No BreakkJ/m2ISO 179/1eU
Charpy Impact Strength (-30°C)330kJ/m²ISO 179/1eU
Charpy Notched Impact Strength (23°C)14kJ/m2ISO 179/1eA
Charpy Notched Impact Strength (-30°C)9kJ/m2ISO 179/1eA
Izod Notched Impact Strength (23°C)14kJ/m2ISO 180/1A
Izod Notched Impact Strength (-40°C)9kJ/m²ISO 180/1A
Ball Indentation Hardness (H 961/30)155MPaISO 2039-1
Poisson's Ratio0.39--
Coefficient of Sliding Friction (1h, Against Itself)0.22-ASTM 1894
Specific Wear Rate, Against Itself40E-6 mm³/N.mASTM 1894
Physical Properties
ValueUnitsTest Method / Conditions
Melt Volume - Flow Rate10cm³/10minISO 1133
Melt Mass Flow Rate - MFR (190°C/2.16 kg)12g/10 minASTM D1238
Load2.16kgISO 1133
Molding Shrinkage - Parallel1.5%ISO 294-4, 2577
Molding Shrinkage - Normal1.6%ISO 294-4, 2577
Temperature190°CISO 1133
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Temperature (10°C/min)178°CISO 11357-1/-3
Temperature of Deflection Under Load(1.8 MPa)80°CISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)145°CISO 75-1/-2
Vicat Softening Temperature (50°C/h, 50N)140°CISO 306
Vicat Softening Temperature (50°C/h, 10N)172°CISO 306
Coefficient of Linear Thermal Expansion - Parallel130E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal120E-6/KISO 11359-1/-2
Relative Temperature Index - Electrical (0.75 mm)105°CUL 746B
Relative Temperature Index - Electrical (1.5 mm)105°CUL 746B
Relative Temperature Index - Electrical (3 mm)105°CUL 746B
Relative Temperature Index - Impact (0.75 mm)85°CUL 746B
Relative Temperature Index - Impact (1.5 mm)85°CUL 746B
Relative Temperature Index - Impact (3 mm)85°CUL 746B
Relative Temperature Index - Strength (0.75 mm)85°CUL 746B
Relative Temperature Index - Strength (1.5 mm)85°CUL 746B
Relative Temperature Index - Strength (3 mm)85°CUL 746B
Electrical Properties
ValueUnitsTest Method / Conditions
Relative Permittivity (100 Hz)3.6-ASTM D 150
Relative Permittivity (1 MHz)3.6-ASTM D150
Dissipation Factor (1 MHz)160E-4IEC 62631-2-1
Surface Resistivity1E15ohmIEC 62631-3-2
Comparative Tracking Index - CTI600VUL 746
Volume Resistivity>1E13ohm.mIEC 60093
Flammability
ValueUnitsTest Method / Conditions
Burning Behaviour (1.5 mm, Nominal Thickness)HBclassIEC 60695-11-10
Burning Behaviour (Thickness h)HBclassIEC 60695-11-10
Glow Wire Flammability Index - GWFI (1 mm)550°CIEC 60695-2-12
Glow Wire Flammability Index - GWFI (2 mm)550°CIEC 60695212
Glow Wire Flammability Index - GWFI (3 mm)550°CIEC 60695-2-12
FMVSS ClassB-ISO 3795 (FMVSS 302)
Burning Rate (1 mm, Thickness)45mm/minISO 3795 (FMVSS 302)
Ul RecognitionYes-UL 94
Thickness Tested1.5mmIEC 60695-11-10
Other Properties
ValueUnitsTest Method / Conditions
Humidity Absorption (2 mm)0.21%Sim. to ISO 62
Water Absorption (2 mm)0.82%Sim. to ISO 62
Water Absorption - Immersion (24 h)0.3%Sim. to ISO 62
Density1380kg/m³ISO 1183
Density of Melt1180kg/m³-
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying RecommendedYes--
Drying Temperature80°C-
Drying Time (Dehumidified Dryer)4.0 - 8.0h-
Processing Moisture Content≤0.05%-
Melt Temperature Optimum205°C-
Min. Melt Temperature200°C-
Max. Melt Temperature210°C-
Mold Temperature Optimum50°C-
Min. Mold Temperature40°C-
Max. Mold Temperature60°C-
Hold Pressure Range60 - 80MPa-
Hold Pressure Time7.5s/mm-
Annealing Time - Optional30min/mm-
Annealing Temperature160°C-
VDA Properties
ValueUnitsTest Method / Conditions
Fogging, G - Value (Condensate)0.2mgISO 6452
Emissionsmax. 81mg/100g/kg/100gVDA 275

Regulatory & Compliance

Technical Details & Test Data

Viscosity vs Shear Rate

DuPont Delrin 500T NC010 Viscosity vs Shear Rate

Shear Stress vs Shear Rate

DuPont Delrin 500T NC010 Shear Stress vs Shear Rate

Dynamic Shear Modulus vs Temperature

DuPont Delrin 500T NC010 Dynamic Shear Modulus vs Temperature

Stress vs Strain

DuPont Delrin 500T NC010 Stress vs Strain

Secant Modulus vs Strain

DuPont Delrin 500T NC010 Secant Modulus vs Strain

Specific Volume Temperature (pvT)

DuPont Delrin 500T NC010 Specific Volume Temperature (pvT)

Tensile Modulus vs Temperature

DuPont Delrin 500T NC010 Tensile Modulus vs Temperature

Packaging & Availability

Regional Availability

Delrin® 500T NC010
DuPont
Browse
Sample
Request
Search