Company logo

Delrin® FG511DP NC010

Sold by DuPont
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3200.0 MPa
Start Order
Secure
Order Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Similar Products from DuPont NEW

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

Delrin® FG511DP NC010 Features & Benefits

Applications & Uses

Properties

Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus3400MPaISO 527
Yield Stress73MPaISO 527-1/-2
Yield Strain12%ISO 527-1/-2
Nominal Strain at Break25%ISO 527-1/-2
Flexural Modulus3200MPaASTM D 790
Flexural Stress at 3.5%87MPaISO 178
Charpy Impact Strength (23°C)220kJ/m²ISO 179/1eU
Charpy Impact Strength (-30°C)200kJ/m2ISO 179/1eU
Charpy Notched Impact Strength (23°C)7kJ/m2ISO 179-1/1eA
Charpy Notched Impact Strength (-30°C)6kJ/m2ISO 179-1/1eA
Poisson's Ratio0.37-ASTM D638
Physical Properties
ValueUnitsTest Method / Conditions
Melt Volume - Flow Rate13cm³/10minISO 1133
Load2.16kgISO 1133
Molding Shrinkage - Parallel1.9%ISO 294-4, 2577
Molding Shrinkage - Normal1.8%ISO 294-4, 2577
Temperature190°CISO 1133
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Temperature (10°C/min)178°CISO 11357-1/-3
Temperature of Deflection Under Load(1.8 MPa)107°CISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)163°CISO 75-1/-2
Vicat Softening Temperature (50°C/h, 50N)160°CISO 306
Coefficient of Linear Thermal Expansion - Parallel100E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal110E-6/KISO 11359-1/-2
Other Properties
ValueUnitsTest Method / Conditions
Humidity Absorption (2 mm)0.3%Sim. to ISO 62
Water Absorption (2 mm)0.9%Sim. to ISO 62
Density1420kg/m³ISO 1183
Processing Information (Extrusion)
ValueUnitsTest Method / Conditions
Melt Temperature Range195 - 205°C-
Processing Moisture Content≤0.2%-
Melt Temperature Optimum200°C-
Drying Time (Dehumidified Dryer)2.0 - 4.0h-
Drying Temperature75 - 85°C-
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying Temperature80°C-
Drying RecommendedYes--
Drying Time (Dehumidified Dryer)2.0 - 4.0h-
Processing Moisture Content≤0.2%-
Melt Temperature Optimum215°C-
Min. Melt Temperature210°C-
Max. Melt Temperature220°C-
Mold Temperature Optimum90°C-
Min. Mold Temperature80°C-
Max. Mold Temperature100°C-
Hold Pressure Range80 - 100MPa-
Hold Pressure Time7.5s/mm-
Annealing Time - Optional30min/mm-
Annealing Temperature160°C-
VDA Properties
ValueUnitsTest Method / Conditions
Fogging - F Value (Refraction)97%ISO 6452
Fogging, G - Value (Condensate)0.1mgISO 6452
Emissionsmax. 8mg/100g/kg/100gVDA 275
Chemical Resistance
Chemical Type Chemical Name Resistance
Acids Acetic Acid (5% by mass) (23°C) Probably Resistant
Acids Chromic Acid solution (40% by mass) (23°C) Not Recommended
Acids Citric Acid solution (10% by mass) (23°C) Not Recommended
Acids Hydrochloric Acid (36% by mass) (23°C) Not Recommended
Acids Lactic Acid (10% by mass) (23°C) Not Recommended
Acids Nitric Acid (40% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (38% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (5% by mass) (23°C) Not Recommended
Alcohols Ethanol (23°C) Probably Resistant
Alcohols Isopropyl alcohol (23°C) Probably Resistant
Alcohols Methanol (23°C) Probably Resistant
Bases Ammonium Hydroxide solution (10% by mass) (23°C) Not Recommended
Bases Sodium Hydroxide solution (1% by mass) (23°C) Not Recommended
Bases Sodium Hydroxide solution (35% by mass) (23°C) Not Recommended
Ethers Diethyl ether (23°C) Probably Resistant
Hydrocarbons iso-Octane (23°C) Probably Resistant
Hydrocarbons n-Hexane (23°C) Probably Resistant
Hydrocarbons Toluene (23°C) Probably Resistant
Ketones Acetone (23°C) Probably Resistant
Mineral oils Insulating Oil (23°C) Probably Resistant
Mineral oils SAE 10W40 multigrade motor oil (130°C) Not Recommended
Mineral oils SAE 10W40 multigrade motor oil (23°C) Probably Resistant
Mineral oils SAE 80/90 hypoid-gear oil (130°C) Not Recommended
Other 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) Probably Resistant
Other 50% Oleic acid + 50% Olive Oil (23°C) Probably Resistant
Other DOT No. 4 Brake fluid (130°C) Not Recommended
Other Ethyl Acetate (23°C) Probably Resistant
Other Ethylene Glycol (50% by mass) in water (108°C) Not Recommended
Other Hydrogen peroxide (23°C) Not Recommended
Other Phenol solution (5% by mass) (23°C) Not Recommended
Other Water (23°C) Probably Resistant
Other Water (90°C) Not Recommended
Salt solutions Sodium Carbonate solution (2% by mass) (23°C) Not Recommended
Salt solutions Sodium Carbonate solution (20% by mass) (23°C) Not Recommended
Salt solutions Sodium Chloride solution (10% by mass) (23°C) Probably Resistant
Salt solutions Sodium Hypochlorite solution (10% by mass) (23°C) Not Recommended
Salt solutions Zinc Chloride solution (50% by mass) (23°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (23°C) Probably Resistant
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (90°C) Not Recommended
Standard Fuels ISO 1817 Liquid 1 - E5 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 2 - M15E4 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 3 - M3E7 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 4 - M15 (60°C) Probably Resistant
Standard Fuels Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) Probably Resistant
Standard Fuels Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) Probably Resistant

Regulatory & Compliance

Compliance
GMP

Technical Details & Test Data

Stress vs Strain

DuPont Delrin FG511DP NC010 Stress vs Strain

Secant Modulus vs Strain

DuPont Delrin FG511DP NC010 Secant Modulus vs Strain

Packaging & Availability

Regional Availability

Delrin® FG511DP NC010
DuPont