Company logo
product
Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B)
Search:

Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B)

Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B) is a soft elastomeric silicone adhesive for adhering medical devices to the skin with medium adhesion force and gentle removal.
Product Resources

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

+

Features & Benefits

+
Labeling Claims
Features & Benefits

Features 

  • Transparent before and after curing 
  • Platinum-catalyzed cure 
  • No cure by-products 
  • Solvent-less 
  • Two parts with similar viscosities and 1:1 mixing ratio 
  • Low viscosity before curing

Benefits 

  • Biocompatible 
  • Tacky 
  • Medium adhesion to the skin 
  • Gentle removal from skin 
  • No residue upon removal 
  • Repositionable 
  • Low peel release force from polyethylene and polypropylene liners 
  • Easily processable two-parts system 
  • Adjustable adhesion force level depending on adhesive coat weight

Applications & Uses

+
Recommended Uses & Known Application

Liveo™ MG 7-9900 Soft Skin Adhesive is intended for medical device applications that require medium adhesion to the skin with gentle removal, including over-the-counter bandages, scar therapies and advanced wound care dressings.

Processing Notes

Mixing: Thoroughly mix the desired amount part A and part B in a 1:1 ratio by weight. Static mixers are recommended mixing tools. During mixing, care should be taken to minimize air entrapment. Airless mixing, metering and dispensing equipment is recommended for large production processing.

De-airing: If a void-free finished part is desired, the entrapped air must be removed from the mixed materials. Exposure to a residual pressure of 711 Torr for several minutes is typically adequate. The vessel containing the material should be at least four times the volume of the mixture to allow for expansion.

Coating: The suggested coating method is knife over roll. Suggested coating thickness is from 0.1mm to 0.5mm (approximately 100g/m²-500g/m²). Thicker coats can be applied if more elastomeric properties are desired.

Curing: The cure reaction will begin once the two parts have been mixed. The initial viscosity will at least double within 20 minutes at 25°C. The cure reaction will occur at room temperature; however heating will accelerate the process

Cleaning: To remove uncured adhesive, Liveo™ Q7-9180 (0.65cst) Silicone Fluid, isopropyl alcohol, ethyl acetate, xylene or heptane can be used. When the adhesive is cured, the greater part should be removed by mechanical means and only the remaining material should be removed with one of the aforementioned solvents.

Properties

+
Compatible Resins & Binders
Physical Properties
ValueUnitsTest Method / Conditions
Viscosity (Component A)5.0Pa.s-
Viscosity (Component B)5.0Pa.s-
Cured Properties
ValueUnitsTest Method / Conditions
Adhesion (polycarbonate)1.9N/2.5cm-
Penetration After Cure (62.5g cone)140.0mm/10-
Release (polyethylene)0.05N/2.5cm-
Other Properties
ValueUnitsTest Method / Conditions
Pot Life20.0min-

Regulatory & Compliance

+
Quality Information

The FDA registered and ISO 9001:2015 certified Healthcare Industries Materials Site (HIMS site) is responsible for ensuring consistent product quality.

Packaging & Availability

+
Packaging Information

These products are supplied in 30 kg pail, 320 kg drum or 1900 kg tote size kits. Samples are available in 908 g kits. Each kit contains equal portions of Part A and Part B.

Storage & Handling

+
Shelf Life
12 months

Documents (3)

Document Name
Type
Products
Technical Data Sheet
Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B)
Technical Data Sheet
Products: Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B)
Brochure
Liveo™ 7-9600 Soft Filling Elastomer Parts A & B, Liveo™ 7-9700 Soft Skin Adhesive Kit A and B, Liveo™ MG 7-9800 Soft Skin Adhesive Kit (A & B), Liveo™ MG 7-9850 Soft Skin Adhesive Kit (A & B), Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B), Liveo™ MG-2401, Liveo™ MG-2402, Liveo™ MG-2410, Liveo™ MG-2502
Brochure
Products: Liveo™ 7-9600 Soft Filling Elastomer Parts A & B, Liveo™ 7-9700 Soft Skin Adhesive Kit A and B, Liveo™ MG 7-9800 Soft Skin Adhesive Kit (A & B), Liveo™ MG 7-9850 Soft Skin Adhesive Kit (A & B), Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B), Liveo™ MG-2401, Liveo™ MG-2402, Liveo™ MG-2410, Liveo™ MG-2502
Brochure
Liveo™ 7-4107 Silicone Elastomer Membrane, Liveo™ Dimethiconol Blend 20, Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B), Liveo™ Q7-9120 Silicone Fluid 12500 cSt, Liveo™ Q7-9120 Silicone Fluid 350 cSt, Liveo™ ST-Elastomer 10, Liveo™ TI-1050 Fluid 1.5 cSt, Liveo™ TI-1050 Fluid 100000 cSt, Liveo™ TI-1050 Fluid 30000 cSt, Liveo™ TI-1050 Fluid 5 cSt, Liveo™ TI-2021 AMS Specialty Fluid, Liveo™ TI-3021 Silicone Elastomer Blend, Liveo™ TI-7012 Solid Resin
Brochure
Products: Liveo™ 7-4107 Silicone Elastomer Membrane, Liveo™ Dimethiconol Blend 20, Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B), Liveo™ Q7-9120 Silicone Fluid 12500 cSt, Liveo™ Q7-9120 Silicone Fluid 350 cSt, Liveo™ ST-Elastomer 10, Liveo™ TI-1050 Fluid 1.5 cSt, Liveo™ TI-1050 Fluid 100000 cSt, Liveo™ TI-1050 Fluid 30000 cSt, Liveo™ TI-1050 Fluid 5 cSt, Liveo™ TI-2021 AMS Specialty Fluid, Liveo™ TI-3021 Silicone Elastomer Blend, Liveo™ TI-7012 Solid Resin