Take Action
Knowde Enhanced TDS
Identification & Functionality
Additives Included
Chemical Family
Polymer Name
Technologies
Features & Benefits
Plastics Features
Applications & Uses
Markets
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Properties
Compatible Polymers & Resins
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Compression Set (at 100°C) | 40 | % | ISO 815 |
| Compression Set (at 23°C) | 12 | % | ISO 815 |
| Compression Set (at 70°C) | 26 | % | ISO 815 |
| Elongation at Break | min. 300 | % | ISO 527-1/-2 or ISO 37 |
| Shore A hardness (15s) | 60 | ISO 48-4 | |
| Stress at Break | 6.9 | MPa | ISO 527-1/-2 or ISO 37 |
| Tear Strength Parallel | 27 | kN/m | ISO 34-1 |
Other Properties
| Value | Units | Test Method / Conditions | |
| Density | 1110 | kg/m³ | ISO 1183 |
Processing Information (Extrusion)
| Value | Units | Test Method / Conditions | |
| Melt Temperature Optimum | 190 | °C | |
| Melt Temperature Range | 180 - 200 | °C |
Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Back Pressure | 1 | MPa | |
| Drying Temperature | 80 | °C | |
| Drying Time (Dehumidified Dryer) | max. 1 | h | |
| Hold Pressure Range | as low as possible | MPa | |
| Maximum Mould Temperature | 60 | °C | |
| Maximum Regrind Level | 10 | % | |
| Minimum Melt Temperature | 180 | °C | |
| Minimum Mould Temperature | 10 | °C | |
| Mold Temperature Optimum | 40 | °C |
Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flow Length | 690 | mm | |
| Flow Length - Pressure | 8 | MPa |
Regulatory & Compliance
Packaging & Availability
Regional Availability
Documents (2)
Name
Type
Follow
News