Rynite® 530HTE NC010
Sold by DuPont
Rynite® 530HTE NC010 is a 30% glass-reinforced modified polyethylene terephthalate resin with excellent high temperature dielectric properties.
Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Similar Products from DuPont NEW
Knowde Enhanced TDS
Identification & Functionality
Chemical Family
Fillers Included
Plastics & Elastomers Functions
Technologies
Rynite® 530HTE NC010 Features & Benefits
Applications & Uses
Markets
Applications
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Properties
Color
Flame Rating
Part Marking Code
Resin ID
Flame Rating
Filler Content
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 11000 | MPa | ASTM D638 |
| Stress at Break | 170 | MPa | ISO 527-1/-2 |
| Strain at Break | 2.3 | % | ISO 527-1/-2 |
| Poisson's Ratio | 0.34 | - | ASTM E132 |
Physical Properties
| Value | Units | Test Method / Conditions | |
| Melt Mass Flow Rate - MFR (240°C/10 kg) | 9 | g/10min | ISO 1133 |
| Molding Shrinkage - Parallel | 0.1 | % | ISO 294-4, 2577 |
| Molding Shrinkage - Normal | 0.6 | % | ISO 294-4, 2577 |
Thermal Properties
| Value | Units | Test Method / Conditions | |
| Melting Temperature (10°C/min) | 252 | °C | ISO 11357-1/-3 |
| Coefficient of Linear Thermal Expansion - Parallel | 21 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion - Normal | 63 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion - Normal (-40 - 23°C) | 56 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion - Normal (55 - 160°C) | 112 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion - Parallel (-40 - 23°C) | 21 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion - Parallel (55 - 160°C) | 18 | E-6/K | ISO 11359-1/-2 |
| Specific Heat Capacity of Melt | 1500 | J/(kg K) | - |
| Relative Temperature Index - Electrical (0.75 mm) | 140 | °C | UL 746B |
| Relative Temperature Index - Electrical (1.5 mm) | 140 | °C | UL 746B |
| Relative Temperature Index - Electrical (3 mm) | 140 | °C | UL 746B |
| Relative Temperature Index - Impact (0.75 mm) | 140 | °C | UL 746B |
| Relative Temperature Index - Impact (1.5 mm) | 140 | °C | UL 746B |
| Relative Temperature Index - Impact (3 mm) | 140 | °C | UL 746B |
| Relative Temperature Index - Strength (0.75 mm) | 140 | °C | UL 746B |
| Relative Temperature Index - Strength (1.5 mm) | 140 | °C | UL 746B |
| Relative Temperature Index - Strength (3 mm) | 140 | °C | UL 746B |
| Thermal Conductivity of Melt | 0.29 | W/(m K) | - |
Electrical Properties
| Value | Units | Test Method / Conditions | |
| Relative Permittivity (100 Hz) | 4.2 | - | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.9 | - | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 14 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 146 | E-4 | IEC 62631-2-1 |
| Surface Resistivity | 1.00E+14 | ohm | IEC 62631-3-2 |
| Electric Strength | 38 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index - CTI | 200 | V | IEC 60112 |
| Volume Resistivity | >1E13 | ohm.m | IEC 60093 |
Flammability
| Value | Units | Test Method / Conditions | |
| Burning Behaviour (Thickness h) | HB | class | IEC 60695-11-10 |
| Glow Wire Flammability Index - GWFI (3 mm) | 800 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (3 mm) | 800 | °C | IEC 60695-2-13 |
| FMVSS Class | B | - | ISO 3795 (FMVSS 302) |
| Burning Rate (1 mm, Thickness) | 36 | mm/min | ISO 3795 (FMVSS 302) |
| Ul Recognition | Yes | - | UL 94 |
| Thickness Tested | 0.85 | mm | IEC 60695-11-10 |
Other Properties
| Value | Units | Test Method / Conditions | |
| Density of Melt | 1360 | kg/m³ | - |
| Density | 1560 | kg/m³ | ISO 1183 |
Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Drying Recommended | Yes | - | - |
| Drying Temperature | 120 | °C | - |
| Drying Time (Dehumidified Dryer) | 4.0 - 6.0 | h | - |
| Processing Moisture Content | ≤0.021 | % | - |
| Melt Temperature Optimum | 285 | °C | - |
| Min. Melt Temperature | 280 | °C | - |
| Max. Melt Temperature | 300 | °C | - |
| Max. Screw Tangential Speed | 0.2 | m/s | - |
| Mold Temperature Optimum | 140 | °C | - |
| Min. Mold Temperature | 120 | °C | - |
| Max. Mold Temperature | 1402 | °C | - |
| Hold Pressure Range | ≥80 | MPa | - |
| Hold Pressure Time | 4 | s/mm | - |
| Back Pressure | As low as possible | - | - |
| Ejection Temperature | 170 | °C | - |
Regulatory & Compliance
Certifications & Compliance
Compliance
Technical Details & Test Data
Viscosity vs Shear Rate
Shear Stress vs Shear Rate
Stress vs Strain (Anisotropy)
Specific Volume Temperature (pvT)
Packaging & Availability
Country Availability
Regional Availability
Rynite® 530HTE NC010
DuPont