Rynite® FR530 NC010 is a 30% glass-reinforced, flame retardant, modified polyethylene terephthalate resin.
Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Flame Retardant
Flexural Modulus: 10500.0 MPa
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Popular DuPont Products
View all DuPont ProductsProduct NameProduct FamiliesApplications
TypeDocument Name
Brochure
Technology Profile Laser Welding
Technology Profile Laser Welding
BrochureOther
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
OtherBrochure
DuPont Performance Polymers - Self Tapping Screws
DuPont Performance Polymers - Self Tapping Screws
BrochureBrochure
Electrical/Electronic Thermoplastic Encapsulation
Electrical/Electronic Thermoplastic Encapsulation
BrochureOther
Rynite® PET Thermoplastic Resins Molding Guide
Rynite® PET Thermoplastic Resins Molding Guide
OtherOther
Design information on Crastin® PBT and Rynite® PET
Design information on Crastin® PBT and Rynite® PET
OtherOther
Rynite® FR530 NC010 Injection Molding Guide
Rynite® FR530 NC010 Injection Molding Guide
OtherTechnical Data Sheet
Rynite® FR530 NC010 Technical Data Sheet
Rynite® FR530 NC010 Technical Data Sheet
Technical Data SheetOther
Rynite® PET Polyester Resin Product Reference Guide
Rynite® PET Polyester Resin Product Reference Guide
OtherOther
Elvamide®, Minlon®, Rynite®, Vamac® Products SVHC Statement
Elvamide®, Minlon®, Rynite®, Vamac® Products SVHC Statement
OtherOther
Rynite® FR530 NC010 SVHC Declaration
Rynite® FR530 NC010 SVHC Declaration
OtherOther
Rynite® FR530 NC010 Regulatory Information Sheet
Rynite® FR530 NC010 Regulatory Information Sheet
OtherKnowde Enhanced TDS
Identification & Functionality
Additives Included
Chemical Family
Fillers Included
Plastics & Elastomers Functions
Technologies
Rynite® FR530 NC010 Features & Benefits
Applications & Uses
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Suitable Applications
- Relay
- Smart Meter
- Coil Form
Properties
Color
Flame Rating
Part Marking Code
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 11500 | MPa | ISO 527-1/-2 |
| Flexural Modulus | 10500 | MPa | ISO 178 |
| Compressive Strength | 200 | MPa | ISO 604 |
| Shear Strength | 60 | MPa | ASTM D 732 |
| Stress (at Break) | 135 | MPa | ISO 527-1/-2 |
| Strain (at Break) | 2 | % | ISO 527-1/-2 |
| Poisson's Ratio | 0.33 | - | - |
| Tensile Creep Modulus (1h) | 11200 | MPa | ISO 899-1 |
| Tensile Creep Modulus (1000h) | 9700 | MPa | ISO 899-1 |
| Charpy Impact Strength (at 23°C) | 40 | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (at -30°C) | 40 | kJ/m² | ISO 179/1eU |
| Notched Charpy Impact Strength (at 23°C) | 10 | kJ/m² | ISO 179/1eA |
| Notched Charpy Impact Strength (at -30°C) | 9 | kJ/m² | ISO 179/1eA |
Typical Properties
| Value | Units | Test Method / Conditions | |
| Resin Identification | PET-GF30FR(17) | - | ISO 1043 |
Thermal Properties
| Value | Units | Test Method / Conditions | |
| Specific Heat Capacity of Melt | 1720 | J/(kg K) | - |
| Melt Temperature (at 10°C/min) | 252 | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (at 10°C/min) | 90 | °C | ISO 11357-1/-2 |
| Temperature of Deflection Under Load (1.8 Mpa) | 225 | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 Mpa) | 243 | °C | ISO 75-1/-2 |
| Vicat Softening Temperature (at 50°C/H 50N) | 220 | °C | ISO 306 |
| Coefficient of Linear Thermal Expansion (Parallel) | 22 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (Normal) | 96 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (Normal, at -40 to 23°C) | 68 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (Normal, at 55-160°C) | 125 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (Parallel, at -40 to 23°C) | 19 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (Parallel, at 55-160°C) | 17 | E-6/K | ISO 11359-1/-2 |
| Relative Thermal Index (Electrical, 0.4mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Electrical, 0.75mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Electrical, 1.5mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Electrical, 3mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Impact, 0.4mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Impact, 0.75mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Impact, 1.5mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Impact, 3mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Strength, 0.4mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Strength, 0.75mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Strength, 1.5mm) | 155 | °C | UL 746B |
| Relative Thermal Index (Strength, 3mm) | 155 | °C | UL 746B |
| Ball Pressure Test | 235 | °C | IEC 60695-10-2 |
| Thermal Conductivity of Melt | 0.24 | W/(m K) | ISO 22007-2 |
| Effective Thermal Diffusivity | 1.1e-07 | m²/s | - |
Electrical Properties
| Value | Units | Test Method / Conditions | |
| Surface Resistivity | 100000000000000 | Ohm | IEC 62631-3-2 |
| Electric Strength | 39 | kV/mm | IEC 60243-1 |
| Relative Permittivity (at 100Hz) | 4.8 | - | IEC 62631-2-1 |
| Relative Permittivity (at 1MHz) | 4.3 | - | IEC 62631-2-1 |
| Dissipation Factor (at 100 Hz) | 70 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (at 1 MHz) | 126 | E-4 | IEC 62631-2-1 |
| Comparative Tracking Index | 200 | - | IEC 60112 |
| Comparative Tracking Index | 2 | PLC | UL 746A |
| Volume Resistivity | min. 1E13 | Ohm.m | IEC 62631-3-1 |
Flammability
| Value | Units | Test Method / Conditions | |
| Oxygen Index | 33 | % | ISO 4589-1/-2 |
| FMVSS Class | DNI | - | ISO 3795 (FMVSS 302) |
| Burning Behavior (at 1.5mm Nominal Thickness) | UL94 V-0 | class | IEC 60695-11-10 |
| Burning Behavior (at 0.35mm Thickness) | UL94 V-0 | class | IEC 60695-11-10 |
| Burning Behavior (at 1.5mm Thickness h, 5V) | UL94 5VA | class | IEC 60695-11-20 |
| Glow Wire Flammability Index (at 0.75mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at 1mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at 2mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at 3mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (at 0.75mm) | 800 | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (at 1mm) | 800 | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (at 1.5mm) | 800 | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (at 2mm) | 850 | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (at 3mm) | 925 | °C | IEC 60695-2-13 |
| Glow Wire Temperature (at 1mm, No Flame) | 800 | °C | IEC 60335-1 |
| Glow Wire Temperature (at 2mm, No Flame) | 775 | °C | IEC 60335-1 |
| Railway Classification | R23 | - | EN 45545-2 |
| Railway Classification Rating | HL1 | - | EN 45545-2 |
Other Properties
| Value | Units | Test Method / Conditions | |
| Humidity Absorption (at 2mm) | 0.15 | % | Sim. to ISO 62 |
| Water Absorption (at 2mm) | 0.75 | % | Sim. to ISO 62 |
| Density | 1680 | kg/m³ | ISO 1183 |
Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Drying Recommended | yes | - | - |
| Drying Temperature | 120 | °C | - |
| Drying Time (Dehumidified Dryer) | 4 - 6 | h | - |
| Hold Pressure Range | min. 80 | MPa | - |
| Hold Pressure Time | 4 | s/mm | - |
| Back Pressure | As low as possible | MPa | - |
| Ejection Temperature | 170 | °C | - |
| Processing Moisture Content ¹ | max. 0.02 | % | - |
| Melt Temperature (Optimum) | 280 | °C | - |
| Melt Temperature (Minimum) | 270 | °C | - |
| Melt Temperature (Maximum) | 290 | °C | - |
| Maximum Screw Tangential Speed | 0.2 | m/s | - |
| Mold Temperature (Optimum) | 110 | °C | - |
| Mold Temperature (Minimum) | 100 | °C | - |
| Mold Temperature (Maximum) ² | 120 | °C | - |
Rheological Properties
| Value | Units | Test Method / Conditions | |
| Mold Shrinkage (Parallel) | 0.2 | % | ISO 294-4, 2577 |
| Mold Shrinkage (Normal) | 0.8 | % | ISO 294-4, 2577 |
| Post Mold Shrinkage (Normal, 48h at 80°C) | 0.2 | % | ISO 294-4 |
| Post Mold Shrinkage (Parallel, 48h at 80°C) | 0 | % | ISO 294-4 |
Note
- [1]: At levels above 0.02%, strength and toughness will decrease, even though parts may not exhibit surface defects.
- [2]: (6mm - 1mm thickness)
Regulatory & Compliance
Certifications & Compliance
OEM Specifications
OEM Standards
Technical Details & Test Data
Dynamic Shear Modulus vs Temperature
Stress vs Strain
Secant Modulus vs Strain
LTHA Stress at Break (3mm)
Packaging & Availability
Country Availability
Regional Availability
Rynite® FR530 NC010
DuPont