Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Tedlar® for Architectural Sheet Metals
In coastal and tropical/sub-tropical natural environments with high temperature, high humidity and especially high salt spray, pollution brought by industrial development is gradually evolving into a highly corrosive atmospheric environment. Metals exposed to these environments for many years are highly susceptible to corrosive damage caused by moisture, oxygen and corrosive substances (such as impurities, acids, salt ions, dust and surface deposits).
Tedlar® film consists of 100% fluorocarbon resin without the addition of plasticizers such as acrylic acid (also known as acrylic or polymethyl methacrylate [PMMA]). The chemical stability and aging resistance of fluorocarbon resins ensure the excellent weatherability of Tedlar® . In addition, Tedlar® film for buildings and construction has been subjected to biaxial stretching to improve mechanical, optical and barrier film properties. The surface of the film is resistant to pinholes, cracks and other abrasions, and provides long-term effective protection for the metal substrate.
The excellent weatherability and corrosion resistance of Tedlar® film laminated metal sheets have been proven in numerous practical application cases over the past 30 years.
- Tedlar® PVF Features in Architectural Applications
- Resistant to weather, ultraviolet (UV) rays, fading and corrosion
- Pliant and easily molded
- Impervious to harsh chemicals and pollution
- Easy to clean
- Resistant to mold, mildew and bacteria
- Environmentally safe
DuPont™ Tedlar® protective film helps extend the look and life of your design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.
Low maintenance costs : In addition to exceptional protection from the elements, Tedlar® provides an impervious barrier against stains and scuffs, making them easy to wipe away. And because it can stand up to the harshest industrial cleaning products, including bleach, Tedlar® protective film helps keep your designs looking their best.
Resistant to mold and mildew : Tedlar® protective films do not support mold or mildew growth, providing superior surface protection in even the most extreme and high-traffic environments. Additionally, Tedlar® won’t support bacterial growth, so it’s safe for you and for the environment.
Fade resistant: Tedlar® PVF is available in both transparent and opaque pigmented film. The color uniformity and fade resistance of pigmented Tedlar® protective film allows it to hold its color and maintain its original appearance for years. Transparent films allow long-term light transmission while greatly minimizing cracking, yellowing or fogging of the laminate.
Durable
Tedlar® film has delivered excellent weatherability and proven protection in a number of practical applications.
Japanese steel sheet plant
Founded in 1984, this steel sheet plant expanded its workshops in 2010 and installed Tedlar® film laminated steel sheets of the same color. As shown in the figure, the newly installed steel sheet has almost no difference in color and appearance compared with the steel sheet that has been used for 26 years.
In addition, although the plant is located in the coastal area, there is no obvious corrosion on the edges of the steel siding and at the screw holes, which indicates that the Tedlar® film provides effective protection for the steel sheet.
Chaoyang Park Tennis Center, Beijing, China
Laminated with Tedlar® film, this tennis center’s air bearing membrane roof has remained almost unchanged in color.
Okinawa Thermal Power Plant, Japan
Founded in 1986, this thermal power plant is located in the coastal area of Okinawa, less than 500 meters from the coastline. The high salt spray environment along the coast and the smoke in the power plant are very corrosive to buildings, especially metal sheets. After 27 years of erosion by wind and rain, the steel sheets protected by Tedlar® film revealed no signs of rusting at the edges and seams. Moreover, the film maintained an ultra-high color stability. After 27 years of use in the coastal environment, there is no obvious discoloration and chalking. There is almost no color difference compared with the sample left inside the plant in 1986.
Stylish
With ultra-low color differences, a smooth and fine texture and excellent formability, Tedlar® film is stylish and esthetically pleasing from installation until its removal. Its matte surface finish even prevents light pollution.
- Metal roofing panel : Tedlar® film’s lot-to-lot color reproducibility is controlled to a delta of <0.5.
- Even & delicate surface finish : With an even surface finish, Tedlar® film prevents uneven thickness and pinholes caused by factors in processing.
- Prevents light pollution : With a matte finish on the surface, Tedlar® film maintains an attractive esthetic without allowing light pollution.
- Ease of machining and shaping : Tedlar® film is pliable and ductile, allowing for excellent processability and application.
Building façade in Yokohama, Japan
In 1983, a building in Yokohama, Japan, installed a façade using Tedlar® PVF film. The film is matte, with an even and delicate surface finish. Compared to the Tedlar® standard color chart, the exterior wall surface has almost no difference in color after three decades of use.
Building in Tokyo, Japan
In 1986, a building in Tokyo, Japan, applied Tedlar® PVF to its exterior walls. Due to the complexity of the wall shape, Tedlar® film—with its easy-to-use machining and shaping properties—was the ideal choice. After more than three decades of use, the wall has almost no difference in color.
Easy to Clean
Non-sticky and stain resistant, Tedlar® film can withstand all types of dirt and grime. Chemically inert, the film can be cleaned with various cleaning agents and requires little maintenance.
Tedlar® is stain resistant and chemically inert, so it can be completely cleaned with a cleaning agent, even when exposed to stubborn stains such as spray paint or caulking compound. Other finishes, such as fluorocarbon paint, may be damaged in cleaning due to poor chemical inertness.
- Non-sticky and stain resistant : Tedlar® film resists all types of dirt, including bird droppings, water marks, paint, cooking fumes, grease, dust, acid rain and more.
- Chemically inert : Tedlar® film can stand up to a wide variety of detergents and strong solvents to remove stains such as asphalt, tar, grease, paint or caulking compound.
- Self-cleaning : Contaminants can be easily washed away by rain water, keeping the building’s appearance fresh and new, and reducing cleaning and maintenance costs.
Pedestrian bridge in Yokohama, Japan
Built in 1990, this pedestrian bridge in Yokohama, Japan, still remains esthetically pleasing after several decades of use. Tedlar® metal lamination was attached as a decorative panel to the side and bottom of the pedestrian bridge. Even today, the dust, moss and other stains on the Tedlar® surface are still very easy to clean, keeping the decorative surface clean and beautiful.
Safe & Environmentally Friendly
Tedlar® film is non-flammable and non-reactive, and it doesn’t support bacterial growth. Additionally, it produces minimal volatile organic compound (VOC) emissions during processing.
- Excellent fire resistance: Tedlar® film is a component of structures that pass safety requirements for aircraft-grade fire resistance and low smoke toxicity. It is also recognized as a non-flammable material in Japan (NM0717, NM1553). Lamination onto metal sheet provides excellent fire resistance and low smoke toxicity.
Applied to the interior of aircraft cabins - Exceptional bacteria resistance : Tedlar® film does not support the growth of bacteria, mold and mildew. It is especially suitable for places that require a high level of cleanliness, such as hospitals, hotels, restaurants and shopping malls.
Applied to sterile operating rooms in hospitals
- Colorful Enduring Empowering
Tedlar® PVF film provides a long-lasting finish to a wide variety of surfaces exposed to harsh environments. The color uniformity and fade resistance of Tedlar® allows it to hold its color and maintain its original appearance for decades.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Tedlar® PVF for Architectural Applications
- Wallcoverings
- Residential and commercial roofing, siding, trim and accents
- Formed or flat metal building panels
- Flexible laminates for air-inflated structures, canopies, awnings and stadium domes
- Indoor and outdoor fabrics
- Curtain walls
- Healthcare facility surfaces
- Pipe and vessel jacketing
Properties
- Chemical Resistance
- Color
- Flame Rating
- Physical Form
- Physical Properties
- Thermal Properties
Value | Units | Test Method / Conditions | |
Coefficient of Friction (Film on Metal) | 0.18 - 0.21 | — | ASTM D1894 |
Falling Sand Erosion (on PET Backing) | 04-Aug | L/µm | ASTM D968 |
Falling Sand Erosion (on PET Backing) | 4-8 | L/µm | ASTM D968 |
Impact Strength | 45 - 89 | J/mm | ASTM D3420 |
Moisture Absorption (for most types) | max. 0.5 | % | Water Immersion |
Optical Transmission of Clear Films | 93 | % | ASTM D1003 |
Refractive Index of Clear Films | 1.46 | — | ASTM D542 |
Shore Hardness | D60 - D70 | — | ASTM D2240 |
Strain at Break | 90 - 250 | % | ASTM D882 |
Tear Strength (Initial) | 100 - 200 | N/mm | ASTM D1004 |
Tear Strength (Propagated) | 5.9 - 24 | N/mm | ASTM D1922 |
Tensile Modulus | 2.1 - 2.6 | GPa | ASTM D882 |
Ultimate Strength | 55 - 110 | MPa | ASTM D882 |
Yield Strength | 34 - 41 | MPa | ASTM D882 |
Value | Units | Test Method / Conditions | |
Coefficient of Thermal Expansion | 5 - 10 x 10^-5 | m/m·K | ASTM D696 |
Lower Glass Transition Temperature | 15 to -20 | °C | Various |
Peak Melting Temperature | 190 - 210 | °C | ASTM E1269 |
Relative Thermal Index - Electrical Strength | 140 | °C | UL 746B |
Relative Thermal Index - Mechanical Impact | 120 | °C | UL 746B |
Relative Thermal Index - Mechanical Strength | 125 | °C | UL 746B |
Specific Heat Capacity | 1.0 - 1.1 | kJ/kg*K | ASTM E1269 |
Temperature Range (continuous use) | -70 to 105 | °C | — |
Upper Glass Transition Temperature | 40 - 50 | °C | Various |
Regulatory & Compliance
Technical Details & Test Data
- Metal Lamination
Product structure and processing flow
Tedlar® film is laminated onto a metal substrate using a special adhesive invented by DuPont based on a hot laminating process. The process and product structure are similar to those of a fluorocarbon coil coated metal sheet. The figure below illustrates the differences between Tedlar® film lamination and fluorocarbon baking coating.
Structural comparison of Tedlar® film laminated steel sheet vs. sheet with fluorocarbon baking coating
Metal Lamination Process of Tedlar® film
- Building Solutions
System solutions for building
Tedlar® film-based metal lamination
Tedlar® film-based metal lamination provides a guarantee of more than 30 years of service life for the roofing of any new project.
Product structure example
Tedlar® metal lamination product structure
Metal roof panel structure diagram
Composite metal sheet with Tedlar® film interior finish
Tedlar® film interior finishes not only have the delicate texture of fabric, but also have excellent properties such as fire-, stain- and corrosion-resistance and ease of cleaning. Organic combination with steel sheet makes the Tedlar® interior finish suitable for medical environments.
Membrane fabric materials laminated with Tedlar® film
Tedlar® film can be laminated with various coated fabrics to form membrane fabric structures at much lower construction costs than steel. With excellent weatherability and dirt-shedding properties, membrane fabric is a cost-effective material for buildings like stadiums, convention centers, commercial facilities and transportation hubs.
Composition of membrane fabric materials
- Improve the Corrosion Resistance and Service Life of Steel Sheets with Tedlar®
-
The picture above shows the rooftop of an industrial plant. The rooftop of the plant consists of two parts. The lower left is Tedlar® film laminated steel sheet installed in 1983, and the upper right roof is steel sheet coated with other material installed in the late 20th century. Although the roof sheets are the same shape and used in the same environment, the appearance of the steel sheet roofs coated with different materials shows a huge difference.
The steel sheet roof not laminated with Tedlar® has been severely rusted, while the Tedlar® film laminated steel sheet roof appears as durable as new after more than 30 years of use.
- Caulking Compound and Solvent Cleaning Test
- Chemical Resistance
Acid and alkali resistance – Test 1
To test the acid and alkali resistance, experimenters placed drops of concentrated sulfuric acid (98%) on the surface of samples of Tedlar® and PVDF for 24 hours.
Acid and alkali resistance – Test 2
After Tedlar® film laminated steel sheet (gray) and PVDF fluorocarbon paint coated steel sheet (blue) have been soaked in 5% hydrochloric acid and 5% sodium hydroxide solution for 30 days at room temperature, obvious bubbling appears on the surface of the PVDF-coated steel sheet, which indicates that the substrate is severely corroded, while the Tedlar® film laminated steel sheet is free of bubbling, delamination, etc., indicating that the Tedlar® film-protected steel sheet has excellent resistance to acid and alkali.
30-day acid and alkali soaking test
Salt spray resistance test
Tedlar® film and PVDF coating were exposed to salt spray for 2,000 hours.
High-temperature acid gas resistance test
This case is a steel roofing sheet project of the synthesis workshop in a chemical plant. Because high-temperature acid gas produced in the synthesis workshop causes severe corrosion to the original steel roof panel, the building owner must replace the roof every two years, which not only affects normal operation of the plant, but also poses a large production safety hazard. The plant replaced some of its roofing with Tedlar® film laminated steel sheets in 2016. After two years, the normal roof was still corroded and had to be replaced regularly, but the new roof panel using the Tedlar® film laminated steel sheets had no corrosion and remained esthetically pleasing.
Original steel sheet roofing
Tedlar® film laminated steel sheet roofing at far right
Chemical resistance of Tedlar® film
Experimenters immersed Tedlar® film in the following chemicals. The checkmarks indicate no significant change in tensile strength and ultimate elongation.
1-year immersion at room temperature 2-hour immersion at boil 31-day immersion at 75°C (167°F) Acids Acetic acid (glacial) ✓ ✓ Hydrochloric acid (10% & 30%) ✓ Hydrochloric acid (10%) ✓ ✓ Nitric acid (20%) ✓ Nitric acid (10% & 40%) ✓ Phosphoric acid (20%) ✓ Sulfuric acid (20%) ✓ Sulfuric acid (30%) ✓ Bases Ammonium hydroxide (12% & 39%) ✓ Ammonium hydroxide (10%) ✓ Sodium hydroxide (10%) ✓ ✓ Sodium hydroxide (10% & 54%) ✓ Solvents Acetone ✓ ✓ Benzene ✓ ✓ Benzyl alcohol ✓ 1,4-Dioxane ✓ Ethyl acetate ✓ Ethyl alcohol ✓ n-Heptane ✓ Kerosene ✓ Methyl ethyl ketone (MEK) ✓ Toluene ✓ Trichloroethylene ✓ Miscellaneous Phenol ✓ Phenol (5%) ✓ Sodium chloride (10%) ✓ Sodium sulfide (9%) ✓ Tricresyl phosphate ✓ - Weather Resistance
Accelerated aging and UV exposure test
As test results show, compared with the surface protection coatings such as acrylic and PVDF, Tedlar® film can better resist UV and acid rain, prevent dust buildup, and retain its thickness, color and gloss for a longer time, thus maintaining the building’s original appearance for longer.
Thickness
Gloss
Color
15-year Florida weather exposure test
Florida’s outdoor exposure field is recognized in the industry as a standard test site for assessing the weatherability of coatings. Ten-year Florida exposure is an important indicator of the American Architectural Manufacturers Association (AAMA) 2605, which is the highest weatherability rating for PVDF. Not only has Tedlar® film passed the 15-year Florida exposure test (color difference E < 4.5), but its color stability and weatherability rating is 50% higher than ordinary PVDF.
Tedlar® Florida weathering data: color change
- Abrasion Resistance & Processability
Abrasion resistance test
Falling sand abrasion tests (ASTM D968) were conducted for 25-micron PVDF coating, 100-micron multilayer hot melt coating and Tedlar® film. The results show that the abrasion resistance of 37.5-micron Tedlar® film surpasses that of PVDF, but is identical to that of 100-micron multilayer hot melt coating.
0T bending test
A 180° 0T bending test (seen here at 40x magnification) shows that the PVDF-coated steel sheet has obvious cracks, while the Tedlar® film laminated steel plate shows no cracks. With film elongation up to 100%, Tedlar® has outstanding processability.
Processability Test
Tedlar® has an elongation of more than 100% and doesn’t crack after 0T bending, thus protecting the sheet from corrosion. It allows for complex sheet shaping during processability, with no discoloration at the bend. Additionally, there is no rusting on the punched steel sheet after a 2000-hour salt spray test.
- Tedlar® PVF Film Passes SGS Test
Test items Test methods Test contents Test results Remarks Weathering test (4000 hours) Weathering test CNS 15200-7-7 (2013) Appearance No cracking, blistering, etc. 1. Condition basis: refer to ASTM G154-12a Cycle 1
2. Illuminance: 0.89 W/m2 /nm
3. Light source type: UVA 340
4. Cycle conditions: 8h UV at 6°C BPT; 4h condensation at 50°C BPT
5. The sample is subject to 0T bending and 9.5 mm cupping before testingGloss CNS 10756-1 60° gloss retention (%) 100% Fading (color difference) ASTM D2244-11 4000 hours ∆E: 0.33 Chalking test ASTM D4214-07 Powdering degree Level 10 Damp heat resistance test (4000 hours) Damp heat resistance test CNS 11607 Appearance No cracking, blistering, etc. 1. Moisture and heat resistance test conditions: temperature: 50 ± 2°C, humidity: 95 ± 5% RH
2. The sample is subject to 0T bending and 9.5 mm cupping before testingGloss test CNS 10756-1 60° gloss retention (%) 98% Rusting grade rating ASTM D1654-92 Rusting grade Level 10 Salt spray test (4000 hours) Salt spray test CNS 8886 (2002) Appearance No cracking, blistering, etc. Salt spray test conditions
1. Experimental salt: analytical reagent
2. Saline concentration: 5 w/v% NaCl
3. Experimental water: pure water
4. Spray exposure zone temperature (°C): 35.0 ± 1.0
5. Spray amount (ml/h/80 cm2 ): 1.7 (avg.)
6. Supply air pressure (kgf/cm2 ): 1.0 (avg.)
7. Cleaning method: before the test— rinse with 38°C warm water, then wipe and dry
8. Solution pH: 6.8 (avg.)
9. Sample placement: vertical placement with an inclination of 15 degrees
10. Sample protection method: rubber seal on four sides
11. The sample is subject to 0T bending and 9.5 mm cupping before testingRusting grade rating ASTM D1654-92 Rusting grade Level 10 Acid and alkali resistance test Acid resistance test CNS 10757 (1995) 20% H2 SO4 , room temperature, 360 hours Immersion in acid solution without abnormality Alkali resistance test CNS 10757 (1995) 25% H2 SO4 , room temperature, 360 hours Immersion in acid solution without abnormality 1. The sample is subject to 0T bending and 9.5 mm cupping before testing Chemical resistance AAMA 2605-13 Nitric acid, after 30 minutes
Nitric acid, after 168 minutes
No significant change in color
No significant change in color
Physical property test Impact test CNS 10757 (1995) 160in.-lb No cracking, peeling, etc. Bending test ASTM D4145-83 (2002) 0T (no cracking, peeling, etc.) Cupping test CNS 10757 (1995) 10.49 mm Abrasion resistance (falling sand abrasion method) ASTM D968-05 (2010) Abrasion resistance (L/mil)(falling sand amount L) 127
191