Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 MPa
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Popular DuPont Products
View all DuPont ProductsProduct NameProduct FamiliesApplications
Zytel® 7301 NC010 Polyamides
Zytel® 70G30REF BK601LT Polyamides Other Devices & Assemblies, Other Consumer Goods Applications, Other Automotive Applications
Zytel® 70G33L BK031 Polyamides Other Consumer Goods Applications, Other Devices & Assemblies, Other Automotive Applications
TypeDocument Name
Brochure
Technology Profile Laser Welding
Technology Profile Laser Welding
BrochureTechnical Data Sheet
Zytel® 70G30HSLR BK099 Technical Data Sheet
Zytel® 70G30HSLR BK099 Technical Data Sheet
Technical Data SheetBrochure
Zytel® Plus Nylon
Zytel® Plus Nylon
BrochureOther
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
OtherBrochure
DuPont Performance Polymers - Self Tapping Screws
DuPont Performance Polymers - Self Tapping Screws
BrochureOther
Minlon® and Zytel® Design Information - Module II
Minlon® and Zytel® Design Information - Module II
OtherOther
Zytel® 70G30HSLR BK099 Regulatory Information Sheet
Zytel® 70G30HSLR BK099 Regulatory Information Sheet
OtherBrochure
Dupont Automotive Radar System Brackets Application Brochure
Dupont Automotive Radar System Brackets Application Brochure
BrochureOther
Structural and Fatigue Performance
Structural and Fatigue Performance
OtherOther
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
OtherOther
Failure Analysis using Microscopic Techniques
Failure Analysis using Microscopic Techniques
OtherOther
Zytel® 70G30HSLR BK099 Injection Molding Guide
Zytel® 70G30HSLR BK099 Injection Molding Guide
OtherKnowde Enhanced TDS
Identification & Functionality
Additives Included
Chemical Family
Fillers Included
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Zytel® 70G30HSLR BK099 Features & Benefits
Materials Features
Industry Needs
- Low dielectric properties for radar transparency
- Material and design solutions for radar absorbency
- Excellent dimensional stability and low warpage
- Excellent balance of mechanical properties
- Resistance to exterior environments, including road salt, automotive fluids, thermal cycling, and hydrolysis resistance
- Improved laser-marking properties
Back Housing and Connector
- Higher thermal conductivity for heat dissipation
- EMI shielding (depending on requirements)
- Improved toughness
- Superior hydrolysis resistance for hot and humid environments
- Improved thermal-shock-cycling resistance
- Available laser transparent and improved laser marking
- Low warpage for higher dimensional control
- Standard grade with good mechanical properties
Mounting Brackets Sensor Support
- Excellent combination of toughness and stiffness
- Good chemical resistance
- Extensive material data available for anisotropic analysis
- Improved laser marking solutions available
Radome
- Improved radio transparency with low Dk and low Df
- Excellent dimensional stability
- Improved toughness
- Superior hydrolysis resistance for hot and humid environments
- Available laser transparent and with improved laser marking.
- Low warpage for higher dimensional control
- Standard grade with good mechanical properties
Applications & Uses
Markets
Applications
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Properties
Chemical Resistance
Color
Flame Rating
Part Marking Code
Mechanical Properties
Value | Units | Test Method / Conditions | |
Tensile Modulus | 10000/7000 | MPa | ISO 527-1/-2 |
Stress (at Break) | 200/130 | MPa | ISO 527-1/-2 |
Strain (at Break) | 3/5 | % | ISO 527-1/-2 |
Flexural Modulus ᴰˢ | 9000/6500 | MPa | ISO 178 |
Flexural Strength ᴰˢ | 280/200 | MPa | ISO 178 |
Flexural Stress (at 3.5%) | 270/170 | MPa | ISO 178 |
Charpy Impact Strength (at 23°C) | 70/80 | kJ/m² | ISO 179/1eU |
Charpy Impact Strength (at -30°C) ᴰˢ | 70/70 | kJ/m² | ISO 179/1eU |
Charpy Impact Strength (at -40°C) | 65/- | kJ/m² | ISO 179/1eU |
Ball Indentation Hardness (H 961/30) | 270/185 | MPa | ISO 2039-1 |
Notched Charpy Impact Strength (at 23°C) | 12/15 | kJ/m² | ISO 179/1eA |
Poisson's Ratio | 0.34/0.35 | - | - |
Notched Charpy Impact Strength (at -30°C) ᴰˢ | 9/9 | kJ/m² | ISO 179/1eA |
Notched Charpy Impact Strength (at -40°C) | 9/9 | kJ/m² | ISO 179/1eA |
Notched Izod Impact Strength (at 23°C) | 10/12 | kJ/m² | ISO 180/1A |
Notched Izod Impact Strength (at -30°C) | 10/- | kJ/m² | ISO 180/1A |
Notched Izod Impact Strength (at -40°C) | 10/- | kJ/m² | ISO 180/1A |
Hardness (Rockwell Scale M) | 104/88 | - | ISO 2039-2 |
Hardness (Rockwell Scale R) | 124/117 | - | ISO 2039-2 |
Multiaxial Impact (Total Energy, 4.5m/s, 2mm) | 5/- | J | ISO 6603-2 |
Typical Properties
Value | Units | Test Method / Conditions | |
Resin Identification | PA66-GF30 | - | ISO 1043 |
ISO Designation | ISO 16396-PA66,GF30,M1CGHRW,S14-100 | - | - |
Thermal Properties
Value | Units | Test Method / Conditions | |
Specific Heat Capacity of Melt | 2290 | J/(kg K) | - |
Melt Temperature (at 10°C/min) | 262/* | °C | ISO 11357-1/-3 |
Glass Transition Temperature (at 10°C/min) | 75/20 | °C | ISO 11357-1/-2 |
Temperature of Deflection Under Load (1.8 Mpa) | 253/* | °C | ISO 75-1/-2 |
Temperature of Deflection Under Load (0.45 Mpa) | 261/* | °C | ISO 75-1/-2 |
Coefficient of Linear Thermal Expansion (Parallel) | 22/* | E-6/K | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (Normal) | 80/* | E-6/K | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (Normal, at -40 to 23°C) | 70/* | E-6/K | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (Normal, at 55-160°C) | 130/* | E-6/K | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (Parallel, at -40 to 23°C) | 26/* | E-6/K | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (Parallel, at 55-160°C) | 13/* | E-6/K | ISO 11359-1/-2 |
Thermal Conductivity | 0.36 | W/(m K) | ISO 22007-2 |
Thermal Conductivity of Melt | 0.21 | W/(m K) | ISO 22007-2 |
Relative Thermal Index (Electrical, 0.75mm) | 140 | °C | UL 746B |
Relative Thermal Index (Electrical, 1.5mm) | 140 | °C | UL 746B |
Relative Thermal Index (Electrical, 3mm) | 140 | °C | UL 746B |
Relative Thermal Index (Impact, 0.75mm) | 125 | °C | UL 746B |
Relative Thermal Index (Impact, 1.5mm) | 125 | °C | UL 746B |
Relative Thermal Index (Impact, 3mm) | 125 | °C | UL 746B |
Relative Thermal Index (Strength, 0.75mm) | 140 | °C | UL 746B |
Relative Thermal Index (Strength, 1.5mm) | 140/* | °C | UL 746B |
Relative Thermal Index (Strength, 3mm) | 140 | °C | UL 746B |
Electrical Properties
Value | Units | Test Method / Conditions | |
Electric Strength | 38/32 | kV/mm | IEC 60243-1 |
Volume Resistivity ᴰˢ | min. 1E13/1E9 | Ohm.m | IEC 62631-3-1 |
Surface Resistivity ᴰˢ | */1E12 | Ohm | IEC 62631-3-2 |
Comparative Tracking Index | 400/- | - | IEC 60112 |
Comparative Tracking Index | 1/- | PLC | UL 746A |
Flammability
Value | Units | Test Method / Conditions | |
Oxygen Index | 24/* | % | ISO 4589-1/-2 |
FMVSS Class | B | - | ISO 3795 (FMVSS 302) |
Burning Behavior (at 1.5mm/* Nominal Thickness)² | UL94 HB/* | class | IEC 60695-11-10 |
Burning Behavior (at 0.75mm/* Thickness h) | UL94 HB/* | class | IEC 60695-11-10 |
Glow Wire Flammability Index (at 1mm) | 700/- | °C | IEC 60695-2-12 |
Glow Wire Flammability Index (at 2mm) | 750/- | °C | IEC 60695-2-12 |
Glow Wire Flammability Index (at 3mm) | 800/- | °C | IEC 60695-2-12 |
Glow Wire Ignition Temperature (at 1mm) | 725/- | °C | IEC 60695-2-13 |
Glow Wire Ignition Temperature (at 2mm) | 725/- | °C | IEC 60695-2-13 |
Glow Wire Ignition Temperature (at 3mm) | 775/- | °C | IEC 60695-2-13 |
Glow Wire Temperature (at 3mm, No Flame) | 750/- | °C | IEC 60335-1 |
Burning Rate (at 1mm Thickness) | 37 | mm/min | ISO 3795 (FMVSS 302) |
Other Properties
Value | Units | Test Method / Conditions | |
Humidity Absorption (at 2mm) | 1.9/* | % | Sim. to ISO 62 |
Water Absorption (at 2mm) | 6/* | % | Sim. to ISO 62 |
Water Absorption (Immersion 24h) | 1.3/* | % | Sim. to ISO 62 |
Density | 1370/- | kg/m³ | ISO 1183 |
Processing Information (Injection Molding)
Value | Units | Test Method / Conditions | |
Drying Recommended | yes | - | - |
Drying Time (Dehumidified Dryer) | 2 - 4 | h | - |
Processing Moisture Content | max. 0.2 | % | - |
Hold Pressure Range | 50 - 100 | MPa | - |
Hold Pressure Time | 3 | s/mm | - |
Ejection Temperature | 210 | °C | - |
Drying Temperature | 80 | °C | - |
Melt Temperature (Optimum) | 295 | °C | - |
Melt Temperature (Minimum) | 285 | °C | - |
Melt Temperature (Maximum) | 305 | °C | - |
Maximum Screw Tangential Speed | 0.2 | m/s | - |
Mold Temperature (Optimum) | 100 | °C | - |
Mold Temperature (Minimum) | 70 | °C | - |
Mold Temperature (Maximum) | 120 | °C | - |
VDA Properties
Value | Units | Test Method / Conditions | |
Odor | 5 | class | VDA 270 |
Rheological Properties
Value | Units | Test Method / Conditions | |
Viscosity Number ¹ | 150/* | cm³/g | ISO 307, 1157, 1628 |
Mold Shrinkage (Parallel) | 0.3/- | % | ISO 294-4, 2577 |
Mold Shrinkage (Normal) | 1.0/- | % | ISO 294-4, 2577 |
Melt Viscosity (at 1000 sec-1, 280°C) | 190/* | Pa.s | ISO 11443 |
Note
- [1]: acid sulphuric 96%
- [DS]: Derived from similar grade
- [2]: UL yellow card with (f1)
Solutions for Mounting Brackets Sensor Support
Stiffness Strength |
Vibration Fatigue & Creep |
Dimensional Stability |
Heat Resistance |
Hydrolysis Resistance |
Road Salt Resistance |
Laser Markable |
Snap Fit |
EMI Shielding (77GHz) |
|
Zytel® 70G30HSLR | +++ | +++ | ++ | ++++ | ++++ | ++++ | ++ | ++ | ++ |
Best: ++++
Chemical Resistance
Chemical Type | Chemical Name | Resistance |
Acids | Acetic Acid (5% by mass) (23°C) | Probably Resistant |
Acids | Chromic Acid solution (40% by mass) (23°C) | Not Recommended |
Acids | Citric Acid solution (10% by mass) (23°C) | Probably Resistant |
Acids | Hydrochloric Acid (36% by mass) (23°C) | Not Recommended |
Acids | Lactic Acid (10% by mass) (23°C) | Probably Resistant |
Acids | Nitric Acid (40% by mass) (23°C) | Not Recommended |
Acids | Sulfuric Acid (38% by mass) (23°C) | Not Recommended |
Acids | Sulfuric Acid (5% by mass) (23°C) | Not Recommended |
Alcohols | Ethanol (23°C) | Probably Resistant |
Alcohols | Isopropyl alcohol (23°C) | Probably Resistant |
Alcohols | Methanol (23°C) | Probably Resistant |
Bases | Ammonium Hydroxide solution (10% by mass) (23°C) | Probably Resistant |
Bases | Sodium Hydroxide solution (1% by mass) (23°C) | Probably Resistant |
Bases | Sodium Hydroxide solution (35% by mass) (23°C) | Not Recommended |
Ethers | Diethyl ether (23°C) | Probably Resistant |
Hydrocarbons | iso-Octane (23°C) | Probably Resistant |
Hydrocarbons | n-Hexane (23°C) | Probably Resistant |
Hydrocarbons | Toluene (23°C) | Probably Resistant |
Ketones | Acetone (23°C) | Probably Resistant |
Mineral oils | Automatic hypoid-gear oil Shell Donax TX (135°C) | Probably Resistant |
Mineral oils | Hydraulic oil Pentosin CHF 202 (125°C) | Probably Resistant |
Mineral oils | Insulating Oil (23°C) | Probably Resistant |
Mineral oils | Motor oil OS206 304 Ref.Eng.Oil, ISP (135°C) | Probably Resistant |
Mineral oils | SAE 10W40 multigrade motor oil (130°C) | Probably Resistant |
Mineral oils | SAE 10W40 multigrade motor oil (23°C) | Probably Resistant |
Mineral oils | SAE 80/90 hypoid-gear oil (130°C) | Probably Resistant |
Other | 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) | Probably Resistant |
Other | 50% Oleic acid + 50% Olive Oil (23°C) | Probably Resistant |
Other | Coolant Glysantin G48, 1:1 in water (125°C) | Probably Resistant |
Other | DOT No. 4 Brake fluid (120°C) | Probably Resistant |
Other | DOT No. 4 Brake fluid (130°C) | Probably Resistant |
Other | Ethyl Acetate (23°C) | Probably Resistant |
Other | Ethylene Glycol (50% by mass) in water (108°C) | Probably Resistant |
Other | Hydrogen peroxide (23°C) | Not Recommended |
Other | Phenol solution (5% by mass) (23°C) | Not Recommended |
Other | Water (23°C) | Probably Resistant |
Other | Water (90°C) | Probably Resistant |
Salt solutions | Sodium Carbonate solution (2% by mass) (23°C) | Probably Resistant |
Salt solutions | Sodium Carbonate solution (20% by mass) (23°C) | Probably Resistant |
Salt solutions | Sodium Chloride solution (10% by mass) (23°C) | Probably Resistant |
Salt solutions | Sodium Hypochlorite solution (10% by mass) (23°C) | Not Recommended |
Salt solutions | Zinc Chloride solution (50% by mass) (23°C) | Not Recommended |
Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) | Not Recommended |
Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (23°C) | Probably Resistant |
Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (90°C) | Probably Resistant |
Standard Fuels | ISO 1817 Liquid 1 - E5 (60°C) | Probably Resistant |
Standard Fuels | ISO 1817 Liquid 2 - M15E4 (60°C) | Probably Resistant |
Standard Fuels | ISO 1817 Liquid 3 - M3E7 (60°C) | Probably Resistant |
Standard Fuels | ISO 1817 Liquid 4 - M15 (60°C) | Probably Resistant |
Standard Fuels | Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) | Probably Resistant |
Standard Fuels | Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) | Probably Resistant |
Regulatory & Compliance
Certifications & Compliance
OEM Standards
Technical Details & Test Data
Viscosity vs Shear Rate
Shear Stress vs Shear Rate
Dynamic Tensile Modulus vs Temperature (Dry)
Dynamic Shear Modulus vs Temperature (Cond.)
Dynamic Shear Modulus vs Temperature (Dry)
Stress vs Strain (Cond.)
Stress vs Strain (Dry)
Secant Modulus vs Strain (Cond.)
Secant Modulus vs Strain (Dry)
Creep Modulus vs Time (140°C, Dry)
Stress vs Strain (Isochronous, 140°C, Dry)
Creep Modulus vs Time (180°C, Dry)
Stress vs Strain (Isochronous, 180°C, Dry)
Specific Volume Temperature (pvT)
LTHA Stress at Break (4mm)
LTHA Strain at Break (4mm)
Tensile Fatigue
Packaging & Availability
Country Availability
Regional Availability
Zytel® 70G30HSLR BK099
DuPont