Company logo

Zytel® 70G30HSLR NC010

Sold by DuPont
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 MPa
Start Order
Secure
Order Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Similar Products from DuPont NEW

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

Chemical Family
Fillers Included
Plastics & Elastomers Functions
Technologies

Zytel® 70G30HSLR NC010 Features & Benefits

Industry Needs

 

  • Low dielectric properties for radar transparency
  • Material and design solutions for radar absorbency
  • Excellent dimensional stability and low warpage
  • Excellent balance of mechanical properties
  • Resistance to exterior environments, including road salt, automotive fluids, thermal cycling, and hydrolysis resistance
  • Improved laser-marking properties

 

Back Housing and Connector

  • Higher thermal conductivity for heat dissipation
  • EMI shielding (depending on requirements)
  • Improved toughness
  • Superior hydrolysis resistance for hot and humid environments
  • Improved thermal-shock-cycling resistance
  • Available laser transparent and improved laser marking
  • Low warpage for higher dimensional control
  • Standard grade with good mechanical properties

 

Mounting Brackets Sensor Support

  • Excellent combination of toughness and stiffness
  • Good chemical resistance
  • Extensive material data available for anisotropic analysis
  • Improved laser marking solutions available

 

Radome

  • Improved radio transparency with low Dk and low Df
  • Excellent dimensional stability
  • Improved toughness
  • Superior hydrolysis resistance for hot and humid environments
  • Available laser transparent and with improved laser marking.
  • Low warpage for higher dimensional control
  • Standard grade with good mechanical properties

Applications & Uses

Properties

Physical Properties
ValueUnitsTest Method / Conditions
Viscosity Number150/-1cm³/gISO 307, 1157, 1628
Molding Shrinkage - Parallel0.3/-%ISO 294-4, 2577
Molding Shrinkage - Normal1.1/-%ISO 294-4, 2577
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus10000/7000MPaISO 527-1/-2
Hardness, Rockwell104/88Scale MISO 2039-2
Hardness, Rockwell124/117Scale RISO 2039-2
Stress at Break200/130MPaISO 527-1/-2
Strain at Break3.3/5%ISO 527-1/-2
Flexural Modulus9000/6300MPaISO 178
Flexural Strength280/200MPaISO 178
Tensile Creep Modulus (1 h)-/6800MPaISO 899-1
Tensile Creep Modulus (1000 h)-/5100MPaISO 899-1
Charpy Impact Strength (23°C)70/80kJ/m²ISO 179/1eU
Charpy Impact Strength (-30°C)70/70kJ/m2ISO 179/1eU
Charpy Notched Impact Strength (23°C)12/15kJ/m2ISO 179/1eA
Charpy Notched Impact Strength (-30°C)10/10kJ/m2ISO 179/1eA
Charpy Notched Impact Strength (-40°C)10/-kJ/m²ISO 179/1eA
Izod Notched Impact Strength (23°C)12/14kJ/m²ISO 180/1A
Izod Notched Impact Strength (-30°C)12/10kJ/m²ISO 180/1A
Izod Impact Strength (23°C)70/-kJ/m²ISO 180/1U
Izod Impact Strength (-30°C)60/-kJ/m²ISO 180/1U
Ball Indentation Hardness (H 961/30)270/185DSMPaISO 2039-1
Poisson's Ratio0.34/0.35--
Multiaxial Impact - Total Energy (4.5m/s, 2 mm)5/-JISO 6603-2
Coefficient of Static Friction (Against Steel)-/0.25-ASTM 1894
Coefficient of Sliding Friction (1h, Against Steel)-/0.31-ASTM 1894
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Temperature (10°C/min)262/-°CISO 11357-1/-3
Glass Transition Temperature (10°C/min)75/20°CISO 11357-1/-2
Temperature of Deflection Under Load(1.8 MPa)253/-°CISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)261/-°CISO 75-1/-2
Vicat Softening Temperature (50°C/h, 50N)250/-°CISO 306
Coefficient of Linear Thermal Expansion - Parallel26/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal80/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal (-40 - 23°C)70/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal (55 - 160°C)130/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Parallel (-40 - 23°C)26/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Parallel (55 - 160°C)13/-E-6/KISO 11359-1/-2
Specific Heat Capacity of Melt2290J/(kg K)-
Relative Temperature Index - Electrical (0.75 mm)140°CUL 746B
Relative Temperature Index - Electrical (1.5 mm)140°CUL 746B
Relative Temperature Index - Electrical (3 mm)140°CUL 746B
Relative Temperature Index - Impact (0.75 mm)125°CUL 746B
Relative Temperature Index - Impact (1.5 mm)125°CUL 746B
Relative Temperature Index - Impact (3 mm)125°CUL 746B
Relative Temperature Index - Strength (0.75 mm)140°CUL 746B
Relative Temperature Index - Strength (1.5 mm)140/-°CUL 746B
Relative Temperature Index - Strength (3 mm)140°CUL 746B
Thermal Conductivity of Melt0.21W/(m K)-
Effective Thermal Diffusivity1.1E-7m²/s-
Electrical Properties
ValueUnitsTest Method / Conditions
Relative Permittivity (100 Hz)4.3/11-IEC 62631-2-1
Relative Permittivity (1 MHz)4.1/4.6-IEC 62631-2-1
Dissipation Factor (100 Hz)70/4600E-4IEC 62631-2-1
Dissipation Factor (1 MHz)150/650E-4IEC 62631-2-1
Surface Resistivity-/1E13ohmIEC 62631-3-2
Electric Strength38/32kV/mmIEC 60243-1
Comparative Tracking Index - CTI450/-VIEC 60112
Comparative Tracking Index - CTI (3.0 mm)1/-PLCUL 746A
Volume Resistivity>1E13/1E9ohm.mIEC 62631-3-1
Flammability
ValueUnitsTest Method / Conditions
Burning Behaviour (1.5 mm, Nominal Thickness)HB/-classIEC 60695-11-10
Burning Behaviour (Thickness h)HB/-classIEC 60695-11-10
Oxygen Index24/-%ISO 4589-1/-2
Glow Wire Flammability Index - GWFI (1 mm)700/-°CIEC 60695-2-12
Glow Wire Flammability Index - GWFI (2 mm)750/-°CIEC 60695-2-12
Glow Wire Flammability Index - GWFI (3 mm)800/-°CIEC 60695-2-12
Glow Wire Ignition Temperature - GWIT (1 mm)675/-°CIEC 60695-2-13
Glow Wire Ignition Temperature (2 mm)675/-°CIEC 60695-2-13
Glow Wire Temperature (No Flame, 1 mm)650/-°CIEC 60335-1
Glow Wire Temperature (No Flame, 2 mm)650/-°CIEC 60335-1
FMVSS ClassSE/B-ISO 3795 (FMVSS 302)
Burning Rate (1 mm, Thickness)24mm/minISO 3795 (FMVSS 302)
Ul RecognitionYes/--UL 94
Thickness Tested1.5/-mmIEC 60695-11-10
Other Properties
ValueUnitsTest Method / Conditions
Humidity Absorption (2 mm)1.9/-%Sim. to ISO 62
Water Absorption (2 mm)6/-%Sim. to ISO 62
Water Absorption - Immersion (24 h)1.3/-%Sim. to ISO 62
Density of Melt1200kg/m³-
Density1370/-kg/m³ISO 1183
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying RecommendedYes--
Drying Temperature80°C-
Drying Time (Dehumidified Dryer)2.0 - 4.0h-
Processing Moisture Content≤0.2%-
Melt Temperature Optimum295°C-
Min. Melt Temperature285°C-
Max. Melt Temperature305°C-
Max. Screw Tangential Speed0.2/-m/s-
Mold Temperature Optimum100°C-
Min. Mold Temperature70°C-
Max. Mold Temperature120°C-
Hold Pressure Range50 - 100MPa-
Hold Pressure Time3s/mm-
Ejection Temperature210°C-
VDA Properties
ValueUnitsTest Method / Conditions
Emission of Organic Compounds3.2µgC/gVDA 277
Thermal Desorption Analysis of Organic Emissions5µg/gVDA 278
Odour4.5classVDA 270
Fogging - F Value (Refraction)95/-%ISO 6452
Fogging, G - Value (Condensate)0.3/-mgISO 6452
Solutions for Mounting Brackets Sensor Support
  Stiffness
Strength
Vibration
Fatigue & Creep
Dimensional
Stability
Heat
Resistance
Hydrolysis
Resistance
Road Salt
Resistance
Laser
Markable
Snap
Fit
EMI Shielding
(77GHz)
Zytel® 70G30HSLR +++ +++ ++ ++++ ++++ ++++ ++ ++ ++

Best: ++++

Chemical Resistance
Chemical Type Chemical Name Resistance
Acids Acetic Acid (5% by mass) (23°C) Probably Resistant
Acids Chromic Acid solution (40% by mass) (23°C) Not Recommended
Acids Citric Acid solution (10% by mass) (23°C) Probably Resistant
Acids Hydrochloric Acid (36% by mass) (23°C) Not Recommended
Acids Lactic Acid (10% by mass) (23°C) Probably Resistant
Acids Nitric Acid (40% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (38% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (5% by mass) (23°C) Not Recommended
Alcohols Ethanol (23°C) Probably Resistant
Alcohols Isopropyl alcohol (23°C) Probably Resistant
Alcohols Methanol (23°C) Probably Resistant
Bases Ammonium Hydroxide solution (10% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (1% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (35% by mass) (23°C) Not Recommended
Ethers Diethyl ether (23°C) Probably Resistant
Hydrocarbons iso-Octane (23°C) Probably Resistant
Hydrocarbons n-Hexane (23°C) Probably Resistant
Hydrocarbons Toluene (23°C) Probably Resistant
Ketones Acetone (23°C) Probably Resistant
Mineral oils Automatic hypoid-gear oil Shell Donax TX (135°C) Probably Resistant
Mineral oils Hydraulic oil Pentosin CHF 202 (125°C) Probably Resistant
Mineral oils Insulating Oil (23°C) Probably Resistant
Mineral oils Motor oil OS206 304 Ref.Eng.Oil, ISP (135°C) Probably Resistant
Mineral oils SAE 10W40 multigrade motor oil (130°C) Probably Resistant
Mineral oils SAE 10W40 multigrade motor oil (23°C) Probably Resistant
Mineral oils SAE 80/90 hypoid-gear oil (130°C) Probably Resistant
Other 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) Probably Resistant
Other 50% Oleic acid + 50% Olive Oil (23°C) Probably Resistant
Other Coolant Glysantin G48, 1:1 in water (125°C) Probably Resistant
Other DOT No. 4 Brake fluid (120°C) Probably Resistant
Other DOT No. 4 Brake fluid (130°C) Probably Resistant
Other Ethyl Acetate (23°C) Probably Resistant
Other Ethylene Glycol (50% by mass) in water (108°C) Probably Resistant
Other Hydrogen peroxide (23°C) Not Recommended
Other Phenol solution (5% by mass) (23°C) Not Recommended
Other Water (23°C) Probably Resistant
Other Water (90°C) Probably Resistant
Salt solutions Sodium Carbonate solution (2% by mass) (23°C) Probably Resistant
Salt solutions Sodium Carbonate solution (20% by mass) (23°C) Probably Resistant
Salt solutions Sodium Chloride solution (10% by mass) (23°C) Probably Resistant
Salt solutions Sodium Hypochlorite solution (10% by mass) (23°C) Not Recommended
Salt solutions Zinc Chloride solution (50% by mass) (23°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (23°C) Probably Resistant
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (90°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 1 - E5 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 2 - M15E4 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 3 - M3E7 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 4 - M15 (60°C) Probably Resistant
Standard Fuels Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) Probably Resistant
Standard Fuels Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) Probably Resistant

Regulatory & Compliance

Technical Details & Test Data

Viscosity vs Shear Rate

DuPont Zytel 70G30HSLR NC010 Viscosity vs Shear Rate

Shear Stress vs Shear Rate

DuPont Zytel 70G30HSLR NC010 Shear Stress vs Shear Rate

Dynamic Tensile Modulus vs Temperature (Cond.)

DuPont Zytel 70G30HSLR NC010 Dynamic Tensile Modulus vs Temperature (Cond.)

Dynamic Tensile Modulus vs Temperature (Dry)

DuPont Zytel 70G30HSLR NC010 Dynamic Tensile Modulus vs Temperature (Dry)

Dynamic Shear Modulus vs Temperature (Cond.)

DuPont Zytel 70G30HSLR NC010 Dynamic Shear Modulus vs Temperature (Cond.)

Dynamic Shear Modulus vs Temperature (Dry)

DuPont Zytel 70G30HSLR NC010 Dynamic Shear Modulus vs Temperature (Dry)

Stress vs Strain (Cond.)

DuPont Zytel 70G30HSLR NC010 Stress vs Strain (Cond.)

Stress vs Strain (Dry)

DuPont Zytel 70G30HSLR NC010 Stress vs Strain (Dry)

Secant Modulus vs Strain (Cond.)

DuPont Zytel 70G30HSLR NC010 Secant Modulus vs Strain (Cond.)

Secant Modulus vs Strain (Dry)

DuPont Zytel 70G30HSLR NC010 Secant Modulus vs Strain (Dry)

Stress vs Strain (Isochronous, 23°C, Cond)

DuPont Zytel 70G30HSLR NC010 Stress vs Strain (Isochronous, 23°C, Cond)

Creep Modulus vs Time (23°C, Cond.)

DuPont Zytel 70G30HSLR NC010 Creep Modulus vs Time (23°C, Cond.)

Stress vs Strain (Isochronous, 80°C, Cond.)

DuPont Zytel 70G30HSLR NC010 Stress vs Strain (Isochronous, 80°C, Cond.)

Creep Modulus vs Time (80°C, Cond.)

DuPont Zytel 70G30HSLR NC010 Creep Modulus vs Time (80°C, Cond.)

Stress vs Strain (Isochronous, 100°C, Cond.)

DuPont Zytel 70G30HSLR NC010 Stress vs Strain (Isochronous, 100°C, Cond.)

Creep Modulus vs Time (100°C, Cond.)

DuPont Zytel 70G30HSLR NC010 Creep Modulus vs Time (100°C, Cond.)

Stress vs Strain (Isochronous, 140°C, Cond)

DuPont Zytel 70G30HSLR NC010 Stress vs Strain (Isochronous, 140°C, Cond)

Creep Modulus vs Time (140°C, Cond.)

DuPont Zytel 70G30HSLR NC010 Creep Modulus vs Time (140°C, Cond.)

Coefficient of Linear Thermal Expansion

DuPont Zytel 70G30HSLR NC010 Coefficient of Linear Thermal Expansion

LTHA Stress at Break (4mm)

DuPont Zytel 70G30HSLR NC010 LTHA Stress at Break (4mm)

LTHA Strain at Break (4mm)

DuPont Zytel 70G30HSLR NC010 LTHA Strain at Break (4mm)

Packaging & Availability

Regional Availability

Zytel® 70G30HSLR NC010
DuPont