Zytel® 70G33L NC010 is a 33% glass fiber reinforced polyamide 66 resin for injection molding.
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 MPa
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Popular DuPont Products
View all DuPont ProductsProduct NameProduct FamiliesApplications
TypeDocument Name
Brochure
Technology Profile Laser Welding
Technology Profile Laser Welding
BrochureTechnical Data Sheet
Zytel® 70G33L NC010 Technical Data Sheet
Zytel® 70G33L NC010 Technical Data Sheet
Technical Data SheetBrochure
Zytel® Plus Nylon
Zytel® Plus Nylon
BrochureOther
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
OtherBrochure
DuPont Performance Polymers - Self Tapping Screws
DuPont Performance Polymers - Self Tapping Screws
BrochureOther
Minlon® and Zytel® Design Information - Module II
Minlon® and Zytel® Design Information - Module II
OtherOther
Structural and Fatigue Performance
Structural and Fatigue Performance
OtherOther
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
OtherOther
Failure Analysis using Microscopic Techniques
Failure Analysis using Microscopic Techniques
OtherOther
Next Generation Plastic Metal Hybrids
Next Generation Plastic Metal Hybrids
OtherOther
Zytel® Products SVHC Statement
Zytel® Products SVHC Statement
OtherOther
Zytel® 70G33L NC010 Injection Molding Guide
Zytel® 70G33L NC010 Injection Molding Guide
OtherKnowde Enhanced TDS
Identification & Functionality
Additives Included
Chemical Family
Fillers Included
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Zytel® 70G33L NC010 Features & Benefits
Materials Features
Applications & Uses
Markets
Applications
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Properties
Chemical Resistance
Color
Flame Rating
Part Marking Code
Mechanical Properties
Value | Units | Test Method / Conditions | |
Tensile Modulus | 10000/8000 | MPa | ISO 527-1/-2 |
Abrasion Resistance | 10/* | mm³ | ISO 4649 |
Flexural Modulus | 9000/6000 | MPa | ISO 178 |
Flexural Strength | 290/200 | MPa | ISO 178 |
Compressive Strength | 240/- | MPa | ISO 604 |
Shear Strength | 90/- | MPa | ASTM D 732 |
Stress (at Break) | 200/140 | MPa | ISO 527-1/-2 |
Strain (at Break) | 3.5/5 | % | ISO 527-1/-2 |
Tensile Creep Modulus (1h) | */8000 | MPa | ISO 899-1 |
Tensile Creep Modulus (1000h) | */5500 | MPa | ISO 899-1 |
Charpy Impact Strength (at 23°C) | 85/100 | kJ/m² | ISO 179/1eU |
Charpy Impact Strength (at -30°C) | 70/75 | kJ/m² | ISO 179/1eU |
Notched Charpy Impact Strength (at 23°C) | 13/17 | kJ/m² | ISO 179/1eA |
Notched Charpy Impact Strength (at -30°C) | 10/10 | kJ/m² | ISO 179/1eA |
Notched Charpy Impact Strength (at -40°C) | 10/10 | kJ/m² | ISO 179/1eA |
Poisson's Ratio | 0.34/0.34 | - | - |
Notched Izod Impact Strength (at 23°C) | 12/15 | kJ/m² | ISO 180/1A |
Notched Izod Impact Strength (at -30°C) | 10/10 | kJ/m² | ISO 180/1A |
Notched Izod Impact Strength (at -40°C) | 10/10 | kJ/m² | ISO 180/1A |
Izod Impact Strength (at 23°C) | 80/90 | kJ/m² | ISO 180/1U |
Izod Impact Strength (at -30°C) | 70/70 | kJ/m² | ISO 180/1U |
Hardness (Rockwell Scale M) | 101/- | - | ISO 2039-2 |
Typical Properties
Value | Units | Test Method / Conditions | |
Resin Identification | PA66-GF33 | - | ISO 1043 |
ISO Designation | ISO 16396-PA66,GF33,M1GNR,S14-100 | - | - |
Thermal Properties
Value | Units | Test Method / Conditions | |
Specific Heat Capacity of Melt | 2210 | J/(kg K) | - |
Melt Temperature (at 10°C/min) | 262/* | °C | ISO 11357-1/-3 |
Glass Transition Temperature (at 10°C/min) | 80/20 | °C | ISO 11357-1/-2 |
Temperature of Deflection Under Load (1.8 Mpa) | 252/* | °C | ISO 75-1/-2 |
Temperature of Deflection Under Load (0.45 Mpa) | 261/* | °C | ISO 75-1/-2 |
Coefficient of Linear Thermal Expansion (Parallel) | 18/* | E-6/K | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (Normal) | 83/* | E-6/K | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (Normal, at -40 to 23°C) | 65/* | E-6/K | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (Normal, at 55-160°C) | 140/* | E-6/K | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (Parallel, at -40 to 23°C) | 24/* | E-6/K | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (Parallel, at 55-160°C) | 13/* | E-6/K | ISO 11359-1/-2 |
Specific Heat Capacity (Solid, Calculated) | 1330 | J/(kg K) | - |
Relative Thermal Index (Electrical, 0.75mm) | 130 | °C | UL 746B |
Relative Thermal Index (Electrical, 1.5mm) | 130 | °C | UL 746B |
Relative Thermal Index (Electrical, 3mm) | 130 | °C | UL 746B |
Relative Thermal Index (Impact, 0.75mm) | 120 | °C | UL 746B |
Relative Thermal Index (Impact, 1.5mm) | 120 | °C | UL 746B |
Relative Thermal Index (Impact, 3mm) | 120 | °C | UL 746B |
Relative Thermal Index (Strength, 0.75mm) | 130 | °C | UL 746B |
Relative Thermal Index (Strength, 1.5mm) | 130/* | °C | UL 746B |
Relative Thermal Index (Strength, 3mm) | 130 | °C | UL 746B |
Thermal Conductivity of Melt | 0.22 | W/(m K) | ISO 22007-2 |
Electrical Properties
Value | Units | Test Method / Conditions | |
Relative Permittivity (at 100Hz) | 4.2/- | - | IEC 62631-2-1 |
Relative Permittivity (at 1MHz) | 4/- | - | IEC 62631-2-1 |
Dissipation Factor (at 100 Hz) | 100/- | E-4 | IEC 62631-2-1 |
Dissipation Factor (at 1 MHz) | 150/- | E-4 | IEC 62631-2-1 |
Comparative Tracking Index | 600/- | - | IEC 60112 |
Electric Strength (Short Time, 1mm) | 37/- | kV/mm | IEC 60243-1 |
Volume Resistivity | 1E13/- | Ohm.m | IEC 62631-3-1 |
Flammability
Value | Units | Test Method / Conditions | |
Oxygen Index | 24/* | % | ISO 4589-1/-2 |
FMVSS Class | SE/B | - | ISO 3795 (FMVSS 302) |
Burning Behavior (at 1.5mm/* Nominal Thickness) | UL94 HB/* | class | IEC 60695-11-10 |
Burning Behavior (at 0.71mm/* Thickness h) | UL94 HB/* | class | IEC 60695-11-10 |
Burning Rate (at 1mm Thickness) | 28 | mm/min | ISO 3795 (FMVSS 302) |
Other Properties
Value | Units | Test Method / Conditions | |
Humidity Absorption (at 2mm) | 1.8/* | % | Sim. to ISO 62 |
Water Absorption (at 2mm) | 5.7/* | % | Sim. to ISO 62 |
Water Absorption (Immersion 24h) ¹ | 1.2/* | % | Sim. to ISO 62 |
Density | 1390/- | kg/m³ | ISO 1183 |
VDA Properties
Value | Units | Test Method / Conditions | |
Emission of Organic Compounds | 6 | µgC/g | VDA 277 |
Odor | 4.5 | class | VDA 270 |
Fogging (F-Value, Refraction) | 95/* | % | ISO 6452 |
Fogging (G-Value, Condensate) | 0.3/* | mg | ISO 6452 |
Processing Information (Injection Molding)
Value | Units | Test Method / Conditions | |
Drying Recommended | yes | - | - |
Drying Temperature | 80 | °C | - |
Drying Time (Dehumidified Dryer) | 2 - 4 | h | - |
Processing Moisture Content | max. 0.2 | % | - |
Hold Pressure Range | 50 - 100 | MPa | - |
Hold Pressure Time | 3 | s/mm | - |
Ejection Temperature | 210 | °C | - |
Melt Temperature (Optimum) | 295 | °C | - |
Melt Temperature (Minimum) | 285 | °C | - |
Melt Temperature (Maximum) | 305 | °C | - |
Maximum Screw Tangential Speed | 0.2 | m/s | - |
Mold Temperature (Optimum) | 100 | °C | - |
Mold Temperature (Minimum) | 70 | °C | - |
Mold Temperature (Maximum) | 120 | °C | - |
Rheological Properties
Value | Units | Test Method / Conditions | |
Viscosity Number | 157/* | cm³/g | ISO 307, 1157, 1628 |
Mold Shrinkage (Parallel) | 0.3/- | % | ISO 294-4, 2577 |
Mold Shrinkage (Normal) | 1.1/- | % | ISO 294-4, 2577 |
Note
- [1]: 2mm thickness
Chemical Resistance
Chemical Type | Chemical Name | Resistance |
Acids | Acetic Acid (5% by mass) (23°C) | Probably Resistant |
Acids | Chromic Acid solution (40% by mass) (23°C) | Not Recommended |
Acids | Citric Acid solution (10% by mass) (23°C) | Probably Resistant |
Acids | Hydrochloric Acid (36% by mass) (23°C) | Not Recommended |
Acids | Lactic Acid (10% by mass) (23°C) | Probably Resistant |
Acids | Nitric Acid (40% by mass) (23°C) | Not Recommended |
Acids | Sulfuric Acid (38% by mass) (23°C) | Not Recommended |
Acids | Sulfuric Acid (5% by mass) (23°C) | Not Recommended |
Alcohols | Ethanol (23°C) | Probably Resistant |
Alcohols | Isopropyl alcohol (23°C) | Probably Resistant |
Alcohols | Methanol (23°C) | Probably Resistant |
Bases | Ammonium Hydroxide solution (10% by mass) (23°C) | Probably Resistant |
Bases | Sodium Hydroxide solution (1% by mass) (23°C) | Probably Resistant |
Bases | Sodium Hydroxide solution (35% by mass) (23°C) | Not Recommended |
Ethers | Diethyl ether (23°C) | Probably Resistant |
Hydrocarbons | iso-Octane (23°C) | Probably Resistant |
Hydrocarbons | n-Hexane (23°C) | Probably Resistant |
Hydrocarbons | Toluene (23°C) | Probably Resistant |
Ketones | Acetone (23°C) | Probably Resistant |
Mineral oils | Insulating Oil (23°C) | Probably Resistant |
Mineral oils | SAE 10W40 multigrade motor oil (130°C) | Probably Resistant |
Mineral oils | SAE 10W40 multigrade motor oil (23°C) | Probably Resistant |
Mineral oils | SAE 80/90 hypoid-gear oil (130°C) | Probably Resistant |
Other | 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) | Probably Resistant |
Other | 50% Oleic acid + 50% Olive Oil (23°C) | Probably Resistant |
Other | DOT No. 4 Brake fluid (130°C) | Probably Resistant |
Other | Ethyl Acetate (23°C) | Probably Resistant |
Other | Ethylene Glycol (50% by mass) in water (108°C) | Probably Resistant |
Other | Hydrogen peroxide (23°C) | Not Recommended |
Other | Phenol solution (5% by mass) (23°C) | Not Recommended |
Other | Water (23°C) | Probably Resistant |
Other | Water (90°C) | Probably Resistant |
Salt solutions | Sodium Carbonate solution (2% by mass) (23°C) | Probably Resistant |
Salt solutions | Sodium Carbonate solution (20% by mass) (23°C) | Probably Resistant |
Salt solutions | Sodium Chloride solution (10% by mass) (23°C) | Probably Resistant |
Salt solutions | Sodium Hypochlorite solution (10% by mass) (23°C) | Not Recommended |
Salt solutions | Zinc Chloride solution (50% by mass) (23°C) | Not Recommended |
Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) | Probably Resistant |
Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (23°C) | Probably Resistant |
Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (90°C) | Probably Resistant |
Standard Fuels | ISO 1817 Liquid 1 - E5 (60°C) | Probably Resistant |
Standard Fuels | ISO 1817 Liquid 2 - M15E4 (60°C) | Probably Resistant |
Standard Fuels | ISO 1817 Liquid 3 - M3E7 (60°C) | Probably Resistant |
Standard Fuels | ISO 1817 Liquid 4 - M15 (60°C) | Probably Resistant |
Standard Fuels | Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) | Probably Resistant |
Standard Fuels | Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) | Probably Resistant |
Regulatory & Compliance
Certifications & Compliance
OEM Standards
Technical Details & Test Data
Stress vs Strain (Cond.)
Stress vs Strain (Dry)
Secant Modulus vs Strain (Cond.)
Secant Modulus vs Strain (Dry)
Stress vs Strain (Isochronous, 23°C, Cond)
Stress vs Strain (Isochronous, 60°C, Cond.)
Stress vs Strain (Isochronous, 100°C, Cond.)
Stress vs Strain (Isochronous, 150°C, Cond)
LTHA Stress at Break (4mm)
Packaging & Availability
Country Availability
Regional Availability
Zytel® 70G33L NC010
DuPont