Zytel® 70G35EF NC010
Sold by DuPont
Zytel® 70G35EF NC010 is a 35% glass-reinforced polyamide 66 developed for electrical and electronics applications.
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent
Flexural Modulus: 10000.0 MPa
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Similar Products from DuPont NEW
Knowde Enhanced TDS
Identification & Functionality
Additives Included
Chemical Family
Fillers Included
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Zytel® 70G35EF NC010 Features & Benefits
Materials Features
Applications & Uses
Markets
Applications
Plastics & Elastomers Processing Methods
Properties
Chemical Resistance
Color
Part Marking Code
Resin ID
Filler Content
Physical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity Number | 143/- | cm³/g | ISO 307, 1157, 1628 |
| Molding Shrinkage - Parallel | 0.4/- | % | ISO 294-4, 2577 |
| Molding Shrinkage - Normal | 1.0/- | % | ISO 294-4, 2577 |
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 11000/8500 | MPa | ISO 527-1/-2 |
| Stress at Break | 200/140 | MPa | ISO 527-1/-2 |
| Strain at Break | 3.5/4.6 | % | ISO 527-1/-2 |
| Flexural Modulus | 10000/7500 | MPa | ISO 178 |
| Flexural Strength | 290/230 | MPa | ISO 178 |
| Tensile Creep Modulus (1 h) | -/8500 | MPa | ISO 899-1 |
| Tensile Creep Modulus (1000 h) | -/6000 | MPa | ISO 899-1 |
| Charpy Impact Strength (23°C) | 90/100 | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (-30°C) | 80/80 | kJ/m2 | ISO 179/1eU |
| Charpy Notched Impact Strength (23°C) | 14/18 | kJ/m2 | ISO 179/1eA |
| Charpy Notched Impact Strength (-30°C) | 11/10 | kJ/m2 | ISO 179 |
| Charpy Notched Impact Strength (-40°C) | 12/- | kJ/m² | ISO 179/1eA |
| Puncture Energy (23°C) | 6/- | J | ISO 6603-2 |
| Izod Notched Impact Strength (23°C) | 15/- | kJ/m² | ISO 180/1A |
| Izod Notched Impact Strength (-40°C) | 13/- | kJ/m² | ISO 180/1A |
| Poisson's Ratio | 0.34/0.34 | - | - |
Thermal Properties
| Value | Units | Test Method / Conditions | |
| Melting Temperature (10°C/min) | 260/- | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (10°C/min) | 70/20 | °C | ISO 11357-1/-2 |
| Temperature of Deflection Under Load(1.8 MPa) | 250/- | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (8 MPa) | 110/- | °C | ISO 75-1/-2 |
| Vicat Softening Temperature (50°C/h, 50N) | 255/- | °C | ISO 306 |
| Coefficient of Linear Thermal Expansion - Parallel | 17/- | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion - Normal | 85/- | E-6/K | ISO 11359-1/-2 |
| Specific Heat Capacity of Melt | 2130 | J/(kg K) | - |
| Thermal Conductivity of Melt | 0.24 | W/(m K) | - |
Electrical Properties
| Value | Units | Test Method / Conditions | |
| Relative Permittivity (1 MHz) | 4.1/4.7 | - | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 140/620 | E-4 | IEC 62631-2-1 |
| Electric Strength | 36/31 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index - CTI | 575/- | V | IEC 60112 |
| Volume Resistivity | >1E13/1E9 | ohm.m | IEC 62631-3-1 |
Flammability
| Value | Units | Test Method / Conditions | |
| Oxygen Index | 24/- | % | ISO 4589-1/-2 |
| Glow Wire Flammability Index - GWFI (2 mm) | 650/- | °C | IEC 60695-2-12 |
| FMVSS Class | B | - | ISO 3795 (FMVSS 302) |
| Burning Rate (1 mm, Thickness) | 26 | mm/min | ISO 3795 (FMVSS 302) |
Other Properties
| Value | Units | Test Method / Conditions | |
| Humidity Absorption (2 mm) | 1.7/- | % | Sim. to ISO 62 |
| Water Absorption (2 mm) | 5.5/- | % | Sim. to ISO 62 |
| Density of Melt | 1240 | kg/m³ | - |
| Density | 1400/- | kg/m³ | ISO 1183 |
Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Drying Recommended | Yes | - | - |
| Drying Temperature | 80 | °C | - |
| Drying Time (Dehumidified Dryer) | 2.0 - 4.0 | h | - |
| Processing Moisture Content | ≤0.2 | % | - |
| Melt Temperature Optimum | 295 | °C | - |
| Min. Melt Temperature | 285 | °C | - |
| Max. Melt Temperature | 305 | °C | - |
| Max. Screw Tangential Speed | 0.2/- | m/s | - |
| Mold Temperature Optimum | 100 | °C | - |
| Min. Mold Temperature | 70 | °C | - |
| Max. Mold Temperature | 120 | °C | - |
| Hold Pressure Range | 50 - 100 | MPa | - |
| Hold Pressure Time | 3 | s/mm | - |
| Ejection Temperature | 210 | °C | - |
VDA Properties
| Value | Units | Test Method / Conditions | |
| Odour | 3 | class | VDA 270 |
| Fogging, G - Value (Condensate) | 0.5/- | mg | ISO 6452 |
Chemical Resistance
| Chemical Type | Chemical Name | Resistance |
| Acids | Acetic Acid (5% by mass) (23°C) | Probably Resistant |
| Acids | Chromic Acid solution (40% by mass) (23°C) | Not Recommended |
| Acids | Citric Acid solution (10% by mass) (23°C) | Probably Resistant |
| Acids | Hydrochloric Acid (36% by mass) (23°C) | Not Recommended |
| Acids | Lactic Acid (10% by mass) (23°C) | Probably Resistant |
| Acids | Nitric Acid (40% by mass) (23°C) | Not Recommended |
| Acids | Sulfuric Acid (38% by mass) (23°C) | Not Recommended |
| Acids | Sulfuric Acid (5% by mass) (23°C) | Not Recommended |
| Alcohols | Ethanol (23°C) | Probably Resistant |
| Alcohols | Isopropyl alcohol (23°C) | Probably Resistant |
| Alcohols | Methanol (23°C) | Probably Resistant |
| Bases | Ammonium Hydroxide solution (10% by mass) (23°C) | Probably Resistant |
| Bases | Sodium Hydroxide solution (1% by mass) (23°C) | Probably Resistant |
| Bases | Sodium Hydroxide solution (35% by mass) (23°C) | Not Recommended |
| Ethers | Diethyl ether (23°C) | Probably Resistant |
| Hydrocarbons | iso-Octane (23°C) | Probably Resistant |
| Hydrocarbons | n-Hexane (23°C) | Probably Resistant |
| Hydrocarbons | Toluene (23°C) | Probably Resistant |
| Ketones | Acetone (23°C) | Probably Resistant |
| Mineral oils | Hydraulic oil Pentosin CHF 202 (125°C) | Probably Resistant |
| Mineral oils | Insulating Oil (23°C) | Probably Resistant |
| Mineral oils | SAE 10W40 multigrade motor oil (130°C) | Probably Resistant |
| Mineral oils | SAE 10W40 multigrade motor oil (23°C) | Probably Resistant |
| Mineral oils | SAE 80/90 hypoid-gear oil (130°C) | Probably Resistant |
| Other | 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) | Probably Resistant |
| Other | 50% Oleic acid + 50% Olive Oil (23°C) | Probably Resistant |
| Other | DOT No. 4 Brake fluid (120°C) | Probably Resistant |
| Other | DOT No. 4 Brake fluid (130°C) | Probably Resistant |
| Other | Ethyl Acetate (23°C) | Probably Resistant |
| Other | Ethylene Glycol (50% by mass) in water (108°C) | Probably Resistant |
| Other | Hydrogen peroxide (23°C) | Not Recommended |
| Other | Phenol solution (5% by mass) (23°C) | Not Recommended |
| Other | Water (23°C) | Probably Resistant |
| Other | Water (90°C) | Probably Resistant |
| Salt solutions | Sodium Carbonate solution (2% by mass) (23°C) | Probably Resistant |
| Salt solutions | Sodium Carbonate solution (20% by mass) (23°C) | Probably Resistant |
| Salt solutions | Sodium Chloride solution (10% by mass) (23°C) | Probably Resistant |
| Salt solutions | Sodium Hypochlorite solution (10% by mass) (23°C) | Not Recommended |
| Salt solutions | Zinc Chloride solution (50% by mass) (23°C) | Not Recommended |
| Standard Fuels | Diesel EN 590 (100°C) | Not Recommended |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) | Not Recommended |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (23°C) | Probably Resistant |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (90°C) | Not Recommended |
| Standard Fuels | ISO 1817 Liquid 1 - E5 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 2 - M15E4 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 3 - M3E7 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 4 - M15 (60°C) | Probably Resistant |
| Standard Fuels | Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) | Probably Resistant |
| Standard Fuels | Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) | Probably Resistant |
Regulatory & Compliance
OEM Standards
Technical Details & Test Data
Viscosity vs Shear Rate
Shear Stress vs Shear Rate
Stress vs Strain (Cond.)
Stress vs Strain (Dry)
Secant Modulus vs Strain (Cond.)
Secant Modulus vs Strain (Dry)
Stress vs Strain (Isochronous, 23°C, Cond)
Creep Modulus vs Time (23°C, Cond.)
Creep Modulus vs Time (100°C, Dry)
Stress vs Strain (Isochronous, 100°C, Dry)
Creep Modulus vs Time (130°C, Dry)
Stress vs Strain (Isochronous, 130°C, Dry)
Creep Modulus vs Time (150°C, Dry)
Creep Modulus vs Time (180°C, Dry)
Stress vs Strain (Isochronous, 150°C, Dry)
Stress vs Strain (Isochronous, 180°C, Dry)
Creep Modulus vs Time (180°C, dry)
Tensile Modulus vs Temperature (Cond.)
Tensile Modulus vs Temperature (Dry)
LTHA Stress at Break (2mm)
Packaging & Availability
Country Availability
Regional Availability
Zytel® 70G35EF NC010
DuPont