product
product
Zytel® 70G50HSL NC010
Search in

Producer: 
DuPont
Brand: 
Zytel
Zytel® 70G50HSL NC010 is a 50% Glass Reinforced, Heat Stabilized, Polyamide 66 Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel® 70G50HSL NC010

Producer: 
DuPont
Brand: 
Zytel
Zytel® 70G50HSL NC010 is a 50% Glass Reinforced, Heat Stabilized, Polyamide 66 Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Take Action

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

+

Properties

+
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus17000/14000MPaISO 527-1/-2
Stress at Break240/170MPaISO 527-1/-2
Strain at Break2.6/3.5%ISO 527-1/-2
Flexural Strength390/280MPaISO 178
Flexural Modulus16000/10000MPaISO 178
Flexural Stress at 3.5% Strain-/250MPaISO 178
Charpy Notched Impact Strength (23°C)17/19kJ/m2ISO 179/1eA
Charpy Notched Impact Strength (-30°C)14/13kJ/m2ISO 179/1eA
Charpy Impact Strength (-30°C)100/100kJ/m2ISO 179/1eU
Charpy Impact Strength (23°C)100/115kJ/m2ISO 179/1eU
Physical Properties
ValueUnitsTest Method / Conditions
Molding Shrinkage - Parallel0.2/-%ISO 294-4, 2577
Molding Shrinkage - Normal (1: sulfuric acid 96%)0.8/-%ISO 294-4, 2577
Viscosity Number150/-cm3/gISO 307, 1157, 1628
Humidity Absorption (2mm)1.2/-%Similar to ISO 62
Water Absorption (2mm)4.2/-%Similar to ISO 62
Thermal Properties
ValueUnitsTest Method / Conditions
Coefficient of Linear Thermal Expantion - Parallel (23-55°C(73-130°F))0.15/-E-6/KASTM E831
Coefficient of Linear Thermal Expantion - Normal (23-55°C (73-130°F))0.73/-E-6/KASTM E831
Deflection Temperature Under Load - DTUL (1.8 MPa)258/-°CISO 75-1/-2
Melting Temperature (10°C/min)262/-°CISO 11357-1/-3
RTI - Impact (0.75mm)115°CUL 746B
RTI - Strength (0.75mm)115°CUL 746B
RTI - Electrical (3mm)120°CUL 746B
RTI - Impact (3mm)130°CUL 746B
RTI - Strength (3mm)130°CUL 746B
RTI - Electrical (0.75mm)120/-°CUL 746B
RTI - Electrical (1.5mm)120/-°CUL 746B
RTI - Impact (1.5mm)125/-°CUL 746B
RTI - Strength (1.5mm)125/-°CUL 746B
Vicat Softening Temperature (50 N; 50°C/h)255/-°CISO 306
Flammability
ValueUnitsTest Method / Conditions
UL recognitionYes/--UL 94
Glow Wire Flammability Index - GWFI (3mm)850/-°CIEC 60695-2-12
Burning BehaviourHB/-classIEC 60695-11-10
Burning Behaviour (1.5mm nominal thickness)HB/-classIEC 60695-11-10
FMVSS ClassSE-ISO 3795 (FMVSS 302)
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying Temperature≥80°C
Drying Time (Dehumidified Dryer)43557h
Drying RecommendedYes-
Processing Moisture Content≤0.2%
Melt Temperature Optimum295°C
Maximum Melt Temperature305°C
Minimum Melt Temperature285°C
Mold Temperature Optimum100°C
Maximum Mould Temperature120°C
Minimum Mould Temperature70°C
Hold Pressure range50-100MPa
Hold Pressure time3s/mm
Maximum Screw Tangential Speed0.2/-m/s
Ejection Temperature210°C
Fillers
Glass Fiber
Chemical Resistance
Chemical Type Chemical Name Resistance
Acids Acetic Acid (5% by mass) (23°C) Probably Resistant
Acids Chromic Acid solution (40% by mass) (23°C) Not Recommended
Acids Citric Acid solution (10% by mass) (23°C) Probably Resistant
Acids Hydrochloric Acid (36% by mass) (23°C) Not Recommended
Acids Lactic Acid (10% by mass) (23°C) Probably Resistant
Acids Nitric Acid (40% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (38% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (5% by mass) (23°C) Not Recommended
Alcohols Ethanol (23°C) Probably Resistant
Alcohols Isopropyl alcohol (23°C) Probably Resistant
Alcohols Methanol (23°C) Probably Resistant
Bases Ammonium Hydroxide solution (10% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (1% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (35% by mass) (23°C) Not Recommended
Ethers Diethyl ether (23°C) Probably Resistant
Hydrocarbons Toluene (23°C) Probably Resistant
Hydrocarbons iso-Octane (23°C) Probably Resistant
Hydrocarbons n-Hexane (23°C) Probably Resistant
Ketones Acetone (23°C) Probably Resistant
Mineral oils Hydraulic oil Pentosin CHF 202 (125°C) Probably Resistant
Mineral oils Insulating Oil (23°C) Probably Resistant
Mineral oils Motor oil OS206 304 Ref.Eng.Oil, (ISP) (135°C) Probably Resistant
Mineral oils SAE 10W40 multigrade motor oil (23°C) Probably Resistant
Mineral oils SAE 10W40 multigrade motor oil, 130°C Probably Resistant
Mineral oils SAE 80/90 hypoid-gear oil, 130°C Probably Resistant
Other 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) Probably Resistant
Other 50% Oleic acid + 50% Olive Oil (23°C) Probably Resistant
Other DOT No. 4 Brake fluid (120°C) Probably Resistant
Other DOT No. 4 Brake fluid (130°C) Probably Resistant
Other Ethyl Acetate (23°C) Probably Resistant
Other Ethylene Glycol (50% by mass in water)(108°C) Probably Resistant
Other Hydrogen peroxide (23°C) Not Recommended
Other Phenol solution (5% by mass) (23°C) Not Recommended
Other Water (23°C) Probably Resistant
Other Water (90°C) Probably Resistant
Salt solutions Sodium Carbonate solution (2% by mass) (23°C) Probably Resistant
Salt solutions Sodium Carbonate solution (20% by mass) (23°C) Probably Resistant
Salt solutions Sodium Chloride solution (10% by mass) (23°C) Probably Resistant
Salt solutions Sodium Hypochlorite solution (10% by mass) (23°C) Not Recommended
Salt solutions Zinc Chloride solution (50% by mass) (23°C) Not Recommended
Standard Fuels Diesel EN 590 (100°C) Probably Resistant
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (90°C) Probably Resistant
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) Probably Resistant
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F)( 23°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 1 - E5 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 2 - M15E4 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 3 - M3E7 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 4 - M15 (60°C) Probably Resistant
Standard Fuels Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) Probably Resistant
Standard Fuels Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) Probably Resistant

 

Regulatory & Compliance

+
Certifications & Compliance

Documents (6)

Name
Type
DuPont Zytel® SVHC Statement
Other
Zytel® 70G50HSL NC010 Technical Data Sheet
Technical Data Sheet
Next Generation Plastic Metal Hybrids
Other
Minlon® and Zytel® Design Information - Module II
Other
DuPont Performance Polymers - Self Tapping Screws
Brochure