Zytel® 8018HS NC010

Sold by DuPont

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 3600.0 MPa

Start Order

Secure

Order Quantity

Price

Available upon quote

Minimum Order Quantity

Quote required

Lead Time

Quote required

Available Incoterms

Quote required

Regional Availability

View

Zytel® 70G30REF NC010

Applications : Other Devices & Assemblies

Zytel® 70G30REF BK601LT

Applications : Other Devices & Assemblies

Zytel® 70G30REF BK314LM

Applications : Other Devices & Assemblies

Zytel® 70G25EF NC010

Applications : Other Devices & Assemblies

Documents

TypeDocument Name

Brochure

Technology Profile Laser Welding

Brochure

Other

Hot Runner Manual for Robust Molding of Semi-crystalline Resins

Other

Brochure

Zytel® Plus Nylon

Brochure

Other

DuPont Zytel® SVHC Statement

Other

Next Generation Plastic Metal Hybrids

Other

Failure Analysis using Microscopic Techniques

Other

DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment

Other

Structural and Fatigue Performance

Other

Brochure

DuPont Performance Polymers - Self Tapping Screws

Brochure

Other

Minlon® and Zytel® Design Information - Module II

Other

Zytel® 8018HS NC010 Injection Molding Guide

Other

Technical Data Sheet

Zytel® 8018HS NC010 Technical Data Sheet

Technical Data Sheet

See All Documents

Knowde Enhanced TDS

Expand All

Identification & Functionality

Additives Included

Chemical Family

Fillers Included

Polymer Name

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers,

Polyamides,

Zytel® 8018HS NC010 Features & Benefits

Materials Features

Good Mold Release,

Good Toughness,

Heat Stabilized

Applications & Uses

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Physical Properties


	Value	Units	Test Method / Conditions
Molding Shrinkage - Parallel	0.4/-	%	ISO 294-4, 2577
Molding Shrinkage - Normal	0.8/-	%	ISO 294-4, 2577

Mechanical Properties


	Value	Units	Test Method / Conditions
Tensile Modulus	4200/2300	MPa	ISO 527-1/-2
Hardness, Rockwell	70	Scale M	ISO 2039-2
Hardness, Rockwell	110	Scale R	ISO 2039-2
Stress at Break	85/58	MPa	ISO 527-1/-2
Strain at Break	6/14	%	ISO 527-1/-2
Flexural Modulus	3600/2000	MPa	ISO 178
Charpy Impact Strength (23°C)	80/100	kJ/m²	ISO 179/1eU
Charpy Impact Strength (-30°C)	80/75	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength (23°C)	14/18	kJ/m2	ISO 179/1eA
Charpy Notched Impact Strength (-30°C)	6/6	kJ/m2	ISO 179
Charpy Notched Impact Strength (-40°C)	4/4	kJ/m²	ISO 179/1eA
Izod Notched Impact Strength (23°C)	13/18	kJ/m²	ISO 180/1A
Izod Notched Impact Strength (-30°C)	10/5	kJ/m²	ISO 180/1A
Izod Notched Impact Strength (-40°C)	7/5	kJ/m²	ISO 180/1A
Izod Impact Strength (23°C)	90/100	kJ/m²	ISO 180/1U
Izod Impact Strength (-30°C)	90/70	kJ/m²	ISO 180/1U
Poisson's Ratio	0.36/0.39	-	-

Thermal Properties


	Value	Units	Test Method / Conditions
Melting Temperature (10°C/min)	263/-	°C	ISO 11357-1/-3
Temperature of Deflection Under Load(1.8 MPa)	195/-	°C	ISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)	246/-	°C	ISO 75-1/-2
Coefficient of Linear Thermal Expansion - Parallel	50/-	E-6/K	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal	118/-	E-6/K	ISO 11359-1/-2
Relative Temperature Index - Electrical (0.75 mm)	120	°C	UL 746B
Relative Temperature Index - Electrical (1.5 mm)	120	°C	UL 746B
Relative Temperature Index - Electrical (3 mm)	120	°C	UL 746B
Relative Temperature Index - Impact (0.75 mm)	65	°C	UL 746B
Relative Temperature Index - Impact (1.5 mm)	95	°C	UL 746B
Relative Temperature Index - Impact (3 mm)	105	°C	UL 746B
Relative Temperature Index - Strength (0.75 mm)	85	°C	UL 746B
Relative Temperature Index - Strength (1.5 mm)	105/-	°C	UL 746B
Relative Temperature Index - Strength (3 mm)	105	°C	UL 746B

Electrical Properties


	Value	Units	Test Method / Conditions
Comparative Tracking Index - CTI	580/-	-	IEC 60112

Flammability


	Value	Units	Test Method / Conditions
Burning Behaviour (1.5 mm, Nominal Thickness)	HB/-	class	IEC 60695-11-10
Burning Behaviour (Thickness h)	HB/-	class	IEC 60695-11-10
Oxygen Index	21/-	%	ISO 4589-1/-2
FMVSS Class	B	-	ISO 3795 (FMVSS 302)
Burning Rate (1 mm, Thickness)	max. 80	mm/min	ISO 3795 (FMVSS 302)
Ul Recognition	Yes/-	-	UL 94
Thickness Tested	1.5/-	mm	IEC 60695-11-10

Other Properties


	Value	Units	Test Method / Conditions
Humidity Absorption (2 mm)	1.9/-	%	Sim. to ISO 62
Water Absorption (2 mm)	6.3/-	%	Sim. to ISO 62
Density	1190/-	kg/m³	ISO 1183

Processing Information (Injection Molding)


	Value	Units	Test Method / Conditions
Drying Recommended	Yes	-	-
Drying Temperature	80	°C	-
Drying Time (Dehumidified Dryer)	2.0 - 4.0	h	-
Processing Moisture Content	≤0.2	%	-
Melt Temperature Optimum	295	°C	-
Min. Melt Temperature	285	°C	-
Max. Melt Temperature	305	°C	-
Max. Screw Tangential Speed	0.2/-	m/s	-
Mold Temperature Optimum	80	°C	-
Min. Mold Temperature	50	°C	-
Max. Mold Temperature	100	°C	-
Hold Pressure Range	50 - 100	MPa	-
Hold Pressure Time	3	s/mm	-
Ejection Temperature	210	°C	-

Chemical Resistance

Chemical Type	Chemical Name	Resistance
Acids	Acetic Acid (5% by mass) (23°C)	Probably Resistant
Acids	Chromic Acid solution (40% by mass) (23°C)	Not Recommended
Acids	Citric Acid solution (10% by mass) (23°C)	Probably Resistant
Acids	Hydrochloric Acid (36% by mass) (23°C)	Not Recommended
Acids	Lactic Acid (10% by mass) (23°C)	Probably Resistant
Acids	Nitric Acid (40% by mass) (23°C)	Not Recommended
Acids	Sulfuric Acid (38% by mass) (23°C)	Not Recommended
Acids	Sulfuric Acid (5% by mass) (23°C)	Not Recommended
Alcohols	Ethanol (23°C)	Probably Resistant
Alcohols	Isopropyl alcohol (23°C)	Probably Resistant
Alcohols	Methanol (23°C)	Probably Resistant
Bases	Ammonium Hydroxide solution (10% by mass) (23°C)	Probably Resistant
Bases	Sodium Hydroxide solution (1% by mass) (23°C)	Probably Resistant
Bases	Sodium Hydroxide solution (35% by mass) (23°C)	Not Recommended
Ethers	Diethyl ether (23°C)	Probably Resistant
Hydrocarbons	iso-Octane (23°C)	Probably Resistant
Hydrocarbons	n-Hexane (23°C)	Probably Resistant
Hydrocarbons	Toluene (23°C)	Probably Resistant
Ketones	Acetone (23°C)	Probably Resistant
Mineral oils	Insulating Oil (23°C)	Probably Resistant
Mineral oils	SAE 10W40 multigrade motor oil (130°C)	Probably Resistant
Mineral oils	SAE 10W40 multigrade motor oil (23°C)	Probably Resistant
Mineral oils	SAE 80/90 hypoid-gear oil (130°C)	Probably Resistant
Other	1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C)	Probably Resistant
Other	50% Oleic acid + 50% Olive Oil (23°C)	Probably Resistant
Other	DOT No. 4 Brake fluid (130°C)	Probably Resistant
Other	Ethyl Acetate (23°C)	Probably Resistant
Other	Ethylene Glycol (50% by mass) in water (108°C)	Probably Resistant
Other	Hydrogen peroxide (23°C)	Not Recommended
Other	Phenol solution (5% by mass) (23°C)	Not Recommended
Other	Water (23°C)	Probably Resistant
Other	Water (90°C)	Not Recommended
Salt solutions	Sodium Carbonate solution (2% by mass) (23°C)	Probably Resistant
Salt solutions	Sodium Carbonate solution (20% by mass) (23°C)	Probably Resistant
Salt solutions	Sodium Chloride solution (10% by mass) (23°C)	Probably Resistant
Salt solutions	Sodium Hypochlorite solution (10% by mass) (23°C)	Not Recommended
Salt solutions	Zinc Chloride solution (50% by mass) (23°C)	Not Recommended
Standard Fuels	Diesel fuel (pref. ISO 1817 Liquid F) (>90°C)	Probably Resistant
Standard Fuels	Diesel fuel (pref. ISO 1817 Liquid F) (23°C)	Probably Resistant
Standard Fuels	Diesel fuel (pref. ISO 1817 Liquid F) (90°C)	Probably Resistant
Standard Fuels	ISO 1817 Liquid 1 - E5 (60°C)	Probably Resistant
Standard Fuels	ISO 1817 Liquid 2 - M15E4 (60°C)	Probably Resistant
Standard Fuels	ISO 1817 Liquid 3 - M3E7 (60°C)	Probably Resistant
Standard Fuels	ISO 1817 Liquid 4 - M15 (60°C)	Probably Resistant
Standard Fuels	Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)	Probably Resistant
Standard Fuels	Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)	Probably Resistant