Company logo

Zytel® E51HSB NC010

Sold by DuPont
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding, Coating
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 MPa
Start Order
Secure
Order Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
Quote required
Zytel® E51HSB NC010
DuPont
Similar Products from DuPont NEW

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

Additives Included
Chemical Family
Plastics & Elastomers Functions
Technologies

Zytel® E51HSB NC010 Features & Benefits

Applications & Uses

Properties

Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus3100/1200MPaISO 527-1/-2
Yield Stress84/55MPaISO 527-1/-2
Yield Strain4.3/29%ISO 527-1/-2
Nominal Strain at Break35/-%ISO 527-1/-2
Flexural Modulus2800/-MPaISO 178
Flexural Stress at 3.5%95/-MPaISO 178
Charpy Impact Strength (23°C)No Break/-kJ/m²ISO 179/1eU
Charpy Notched Impact Strength (23°C)7/21kJ/m²ISO 179/1eA
Charpy Notched Impact Strength (-30°C)6/4kJ/m²ISO 179/1eA
Izod Notched Impact Strength (23°C)6/-kJ/m²ISO 180/1A
Poisson's Ratio0.37/0.44--
Physical Properties
ValueUnitsTest Method / Conditions
Viscosity Number310/-1cm³/gISO 307, 1157, 1628
Molding Shrinkage - Parallel1.3/-%ISO 294-4, 2577
Molding Shrinkage - Normal1.3/-%ISO 294-4, 2577
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Temperature (10°C/min)262/-°CISO 11357-1/-3
Temperature of Deflection Under Load(1.8 MPa)70/-°CISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)200/-°CISO 75-1/-2
Vicat Softening Temperature (50°C/h, 50N)221/-°CISO 306
Coefficient of Linear Thermal Expansion - Parallel100/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal100/-E-6/KISO 11359-1/-2
Specific Heat Capacity of Melt2790J/(kg K)-
Thermal Conductivity of Melt0.16W/(m K)-
Electrical Properties
ValueUnitsTest Method / Conditions
Comparative Tracking Index - CTI600/--IEC 60112
Volume Resistivity>1E13/1E11ohm.mIEC 62631-3-1
Flammability
ValueUnitsTest Method / Conditions
Oxygen Index20/-%ISO 4589-1/-2
FMVSS ClassDNI-ISO 3795 (FMVSS 302)
Other Properties
ValueUnitsTest Method / Conditions
Humidity Absorption (2 mm)2.6/-%Sim. to ISO 62
Water Absorption (2 mm)8.5/-%Sim. to ISO 62
Density of Melt980kg/m³-
Density1140/-kg/m³ISO 1183
Processing Information (Extrusion)
ValueUnitsTest Method / Conditions
Melt Temperature Range280 - 290°C-
Processing Moisture Content≤0.05%-
Drying Temperature≤80°C-
Melt Temperature Optimum285°C-
Drying Time (Dehumidified Dryer)4.0 - 6.0h-
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying Temperature80°C-
Drying RecommendedYes--
Drying Time (Dehumidified Dryer)2.0 - 4.0h-
Processing Moisture Content≤0.05%-
Melt Temperature Optimum290°C-
Min. Melt Temperature280°C-
Max. Melt Temperature300°C-
Max. Screw Tangential Speed0.4/-m/s-
Mold Temperature Optimum70°C-
Min. Mold Temperature50°C-
Max. Mold Temperature90°C-
Hold Pressure Range50 - 100MPa-
Hold Pressure Time4s/mm-
Ejection Temperature190°C-
Chemical Resistance
Chemical Type Chemical Name Resistance
Acids Acetic Acid (5% by mass) (23°C) Probably Resistant
Acids Chromic Acid solution (40% by mass) (23°C) Not Recommended
Acids Citric Acid solution (10% by mass) (23°C) Probably Resistant
Acids Hydrochloric Acid (36% by mass) (23°C) Not Recommended
Acids Lactic Acid (10% by mass) (23°C) Probably Resistant
Acids Nitric Acid (40% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (38% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (5% by mass) (23°C) Not Recommended
Alcohols Ethanol (23°C) Probably Resistant
Alcohols Isopropyl alcohol (23°C) Probably Resistant
Alcohols Methanol (23°C) Probably Resistant
Bases Ammonium Hydroxide solution (10% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (1% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (35% by mass) (23°C) Not Recommended
Ethers Diethyl ether (23°C) Probably Resistant
Hydrocarbons iso-Octane (23°C) Probably Resistant
Hydrocarbons n-Hexane (23°C) Probably Resistant
Hydrocarbons Toluene (23°C) Probably Resistant
Ketones Acetone (23°C) Probably Resistant
Mineral oils Insulating Oil (23°C) Probably Resistant
Mineral oils SAE 10W40 multigrade motor oil (130°C) Not Recommended
Mineral oils SAE 10W40 multigrade motor oil (23°C) Probably Resistant
Mineral oils SAE 80/90 hypoid-gear oil (130°C) Not Recommended
Other 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) Probably Resistant
Other 50% Oleic acid + 50% Olive Oil (23°C) Probably Resistant
Other DOT No. 4 Brake fluid (130°C) Not Recommended
Other Ethyl Acetate (23°C) Probably Resistant
Other Ethylene Glycol (50% by mass) in water (108°C) Not Recommended
Other Hydrogen peroxide (23°C) Not Recommended
Other Phenol solution (5% by mass) (23°C) Not Recommended
Other Water (23°C) Probably Resistant
Other Water (90°C) Not Recommended
Salt solutions Sodium Carbonate solution (2% by mass) (23°C) Probably Resistant
Salt solutions Sodium Carbonate solution (20% by mass) (23°C) Probably Resistant
Salt solutions Sodium Chloride solution (10% by mass) (23°C) Probably Resistant
Salt solutions Sodium Hypochlorite solution (10% by mass) (23°C) Not Recommended
Salt solutions Zinc Chloride solution (50% by mass) (23°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (23°C) Probably Resistant
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (90°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 1 - E5 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 2 - M15E4 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 3 - M3E7 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 4 - M15 (60°C) Probably Resistant
Standard Fuels Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) Probably Resistant
Standard Fuels Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) Probably Resistant

Regulatory & Compliance

OEM Specifications
OEM Standards

Technical Details & Test Data

Viscosity vs Shear Rate

DuPont Zytel E51HSB NC010 Viscosity vs Shear Rate

Shear Stress vs Shear Rate

DuPont Zytel E51HSB NC010 Shear Stress vs Shear Rate

Stress vs Strain (Cond.)

DuPont Zytel E51HSB NC010 Stress vs Strain (Cond.)

Stress vs Strain (Dry)

DuPont Zytel E51HSB NC010 Stress vs Strain (Dry)

Secant Modulus vs Strain (Cond.)

DuPont Zytel E51HSB NC010 Secant Modulus vs Strain (Cond.)

Secant Modulus vs Strain (Dry)

DuPont Zytel E51HSB NC010 Secant Modulus vs Strain (Dry)

Specific Volume Temperature (pvT)

DuPont Zytel E51HSB NC010 Specific Volume Temperature (pvT)

Packaging & Availability

Browse
Sample
Request
Search