Zytel® FN727 NC010A
Sold by DuPont
Zytel® FN727 NC010A is an impact modified, plasticizer free, very flexible polyamide 6 alloy resin having good low temperature toughness, good heat aging and good chemical resistance. Uses include cable jacketing, hose and tube applications.
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Film Extrusion, Coating, Sheet, Plaques & Profiles Extrusion, Blow Molding, Injection Molding
Flexural Modulus: 900.0 MPa
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Similar Products from DuPont NEW
Knowde Enhanced TDS
Identification & Functionality
Chemical Family
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Zytel® FN727 NC010A Features & Benefits
Labeling Claims
Applications & Uses
Applications
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Properties
Chemical Resistance
Color
Part Marking Code
Resin ID
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 900/330 | MPa | ISO 527-1/-2 |
| Stress at 50% Strain | 28/16 | MPa | ISO 527-1/-2 |
| Strain at Break | min. 500/min. 500 | % | ISO 527-1/-2 |
| Flexural Modulus | 900/- | MPa | ASTM D 790 |
| Charpy Notched Impact Strength (23°C) | 130/- | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (-30°C) | 65/- | kJ/m² | ISO 179/1eA |
| Izod Notched Impact Strength (23°C) | No Break/- | kJ/m² | ISO 180/1A |
| Poisson's Ratio | 0.45/0.48 | - | - |
Physical Properties
| Value | Units | Test Method / Conditions | |
| Molding Shrinkage - Parallel | 0.8/- | % | ISO 294-4, 2577 |
| Molding Shrinkage - Normal | 1.2/- | % | ISO 294-4, 2577 |
Thermal Properties
| Value | Units | Test Method / Conditions | |
| Melting Temperature (10°C/min) | 221/- | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (10°C/min) | 55/10 | °C | ISO 11357-1/-2 |
| Temperature of Deflection Under Load(1.8 MPa) | 48/- | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 55/- | °C | ISO 75-1/-2 |
| Specific Heat Capacity of Melt | 2700 | J/(kg K) | - |
| Thermal Conductivity of Melt | 0.16 | W/(m K) | - |
Flammability
| Value | Units | Test Method / Conditions | |
| FMVSS Class | B | - | ISO 3795 (FMVSS 302) |
| Burning Rate (1 mm, Thickness) | 27 | mm/min | ISO 3795 (FMVSS 302) |
Other Properties
| Value | Units | Test Method / Conditions | |
| Humidity Absorption (2 mm) | 1.4/- | % | Sim. to ISO 62 |
| Density of Melt | 870 | kg/m³ | - |
| Density | 1020/- | kg/m³ | ISO 1183 |
Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Drying Recommended | Yes | - | - |
| Drying Time (Dehumidified Dryer) | 2.0 - 4.0 | h | - |
| Processing Moisture Content | ≤0.1 | % | - |
| Melt Temperature Optimum | 260 | °C | - |
| Min. Melt Temperature | 250 | °C | - |
| Max. Melt Temperature | 280 | °C | - |
| Min. Mold Temperature | 40 | °C | - |
| Max. Mold Temperature | 80 | °C | - |
Chemical Resistance
| Chemical Type | Chemical Name | Resistance |
| Acids | Acetic Acid (5% by mass) (23°C) | Probably Resistant |
| Acids | Chromic Acid solution (40% by mass) (23°C) | Not Recommended |
| Acids | Citric Acid solution (10% by mass) (23°C) | Probably Resistant |
| Acids | Hydrochloric Acid (36% by mass) (23°C) | Not Recommended |
| Acids | Lactic Acid (10% by mass) (23°C) | Probably Resistant |
| Acids | Nitric Acid (40% by mass) (23°C) | Not Recommended |
| Acids | Sulfuric Acid (38% by mass) (23°C) | Not Recommended |
| Acids | Sulfuric Acid (5% by mass) (23°C) | Not Recommended |
| Alcohols | Ethanol (23°C) | Probably Resistant |
| Alcohols | Isopropyl alcohol (23°C) | Probably Resistant |
| Alcohols | Methanol (23°C) | Probably Resistant |
| Bases | Ammonium Hydroxide solution (10% by mass) (23°C) | Probably Resistant |
| Bases | Sodium Hydroxide solution (1% by mass) (23°C) | Probably Resistant |
| Bases | Sodium Hydroxide solution (35% by mass) (23°C) | Not Recommended |
| Ethers | Diethyl ether (23°C) | Probably Resistant |
| Hydrocarbons | iso-Octane (23°C) | Probably Resistant |
| Hydrocarbons | n-Hexane (23°C) | Probably Resistant |
| Hydrocarbons | Toluene (23°C) | Probably Resistant |
| Ketones | Acetone (23°C) | Probably Resistant |
| Mineral oils | Insulating Oil (23°C) | Probably Resistant |
| Mineral oils | SAE 10W40 multigrade motor oil (130°C) | Not Recommended |
| Mineral oils | SAE 10W40 multigrade motor oil (23°C) | Probably Resistant |
| Mineral oils | SAE 80/90 hypoid-gear oil (130°C) | Not Recommended |
| Other | 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) | Probably Resistant |
| Other | 50% Oleic acid + 50% Olive Oil (23°C) | Probably Resistant |
| Other | DOT No. 4 Brake fluid (130°C) | Not Recommended |
| Other | Ethyl Acetate (23°C) | Probably Resistant |
| Other | Ethylene Glycol (50% by mass) in water (108°C) | Not Recommended |
| Other | Hydrogen peroxide (23°C) | Not Recommended |
| Other | Phenol solution (5% by mass) (23°C) | Not Recommended |
| Other | Water (23°C) | Probably Resistant |
| Other | Water (90°C) | Not Recommended |
| Salt solutions | Sodium Carbonate solution (2% by mass) (23°C) | Probably Resistant |
| Salt solutions | Sodium Carbonate solution (20% by mass) (23°C) | Probably Resistant |
| Salt solutions | Sodium Chloride solution (10% by mass) (23°C) | Probably Resistant |
| Salt solutions | Sodium Hypochlorite solution (10% by mass) (23°C) | Not Recommended |
| Salt solutions | Zinc Chloride solution (50% by mass) (23°C) | Not Recommended |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) | Not Recommended |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (23°C) | Probably Resistant |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (90°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 1 - E5 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 2 - M15E4 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 3 - M3E7 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 4 - M15 (60°C) | Probably Resistant |
| Standard Fuels | Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) | Probably Resistant |
| Standard Fuels | Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) | Probably Resistant |
Regulatory & Compliance
OEM Specifications
OEM Standards
Technical Details & Test Data
Viscosity vs Shear Rate
Shear Stress vs Shear Rate
Dynamic Tensile Modulus vs Temperature (Cond.)
Dynamic Tensile Modulus vs Temperature (Dry)
Dynamic Shear Modulus vs Temperature (Dry)
Specific Volume Temperature (pvT)
Packaging & Availability
Country Availability
Regional Availability
Zytel® FN727 NC010A
DuPont