Company logo

Zytel® FR50 NC010

Sold by DuPont
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Lubricant (Unspecified), Flame Retardant
Start Order
Secure
Order Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Similar Products from DuPont NEW
TypeDocument Name
Brochure
Technology Profile Laser Welding
Technology Profile Laser Welding
Brochure
Other
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Other
Brochure
Zytel® Plus Nylon
Zytel® Plus Nylon
Brochure
Other
DuPont Zytel® SVHC Statement
DuPont Zytel® SVHC Statement
Other
Other
Failure Analysis using Microscopic Techniques
Failure Analysis using Microscopic Techniques
Other
Technical Data Sheet
Zytel® FR50 NC010 Technical Data Sheet
Zytel® FR50 NC010 Technical Data Sheet
Technical Data Sheet
Other
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
Other
Other
Structural and Fatigue Performance
Structural and Fatigue Performance
Other
Brochure
DuPont Performance Polymers - Self Tapping Screws
DuPont Performance Polymers - Self Tapping Screws
Brochure
Other
Minlon® and Zytel® Design Information - Module II
Minlon® and Zytel® Design Information - Module II
Other
Other
Zytel® FR50 NC010 Injection Molding Guide
Zytel® FR50 NC010 Injection Molding Guide
Other
Other
Zytel® FR50 NC010 Regulatory Information Sheet
Zytel® FR50 NC010 Regulatory Information Sheet
Other

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

Chemical Family
Fillers Included
Plastics & Elastomers Functions
Technologies

Zytel® FR50 NC010 Features & Benefits

Applications & Uses

Properties

Physical Properties
ValueUnitsTest Method / Conditions
Viscosity Number150/-1cm³/gISO 307, 1157, 1628
Molding Shrinkage - Parallel0.3/-%ISO 294-4, 2577
Molding Shrinkage - Normal0.8/-%ISO 294-4, 2577
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus10000/8000MPaISO 527-1/-2
Stress at Break170/120MPaISO 527-1/-2
Strain at Break2.6/3%ISO 527-1/-2
Charpy Impact Strength (23°C)60/-kJ/m²ISO 179/1eU
Charpy Impact Strength (-30°C)50/-kJ/m2ISO 179/1eU
Charpy Impact Strength (-40°C)50/-kJ/m²ISO 179/1eU
Charpy Notched Impact Strength (23°C)12/13kJ/m²ISO 179/1eA
Charpy Notched Impact Strength (-30°C)12/11kJ/m2ISO 179
Charpy Notched Impact Strength (-40°C)12/10kJ/m²ISO 179/1eA
Poisson's Ratio0.34/0.34--
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Temperature (10°C/min)262/-1°CISO 11357-1/-3
Temperature of Deflection Under Load(1.8 MPa)240/-°CISO 75-1/-2
Coefficient of Linear Thermal Expansion - Normal (-40 - 23°C)55/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal (55 - 160°C)110/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Parallel (-40 - 23°C)20/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Parallel (55 - 160°C)21/-E-6/KISO 11359-1/-2
Relative Temperature Index - Electrical (0.75 mm)130°CUL 746B
Relative Temperature Index - Electrical (1.5 mm)130°CUL 746B
Relative Temperature Index - Electrical (3 mm)130°CUL 746B
Relative Temperature Index - Impact (0.75 mm)105°CUL 746B
Relative Temperature Index - Impact (1.5 mm)115°CUL 746B
Relative Temperature Index - Impact (3 mm)115°CUL 746B
Relative Temperature Index - Strength (0.75 mm)105°CUL 746B
Relative Temperature Index - Strength (1.5 mm)115/-°CUL 746B
Relative Temperature Index - Strength (3 mm)120°CUL 746B
Typical Properties
ValueUnitsTest Method / Conditions
Hot-Wire Ignition1-UL PLC
Hight-Current Arc Ignition0-UL PLC
Comparative Tracking Index1-UL PLC
Electrical Properties
ValueUnitsTest Method / Conditions
Surface Resistivity-/1.8E141ohmIEC 62631-3-2
Electric Strength24/222kV/mmIEC 60243-1
Comparative Tracking Index - CTI275/--IEC 60112
Volume Resistivity>1E13/2.7E10ohm.mIEC 62631-3-1
Flammability
ValueUnitsTest Method / Conditions
Burning Behaviour (1.5 mm, Nominal Thickness)V-0/-classIEC 60695-11-10
Burning Behaviour (Thickness h)V-0/-classIEC 60695-11-10
Burning Behaviour (5V, Thickness h)5VA/-classIEC 60695-11-20
FMVSS ClassB-ISO 3795 (FMVSS 302)
Burning Rate (1 mm, Thickness)max. 80mm/minISO 3795 (FMVSS 302)
Ul RecognitionYes/--UL 94
Thickness Tested1.5/-mmIEC 60695-11-10
Other Properties
ValueUnitsTest Method / Conditions
Humidity Absorption (2 mm)1.3/-%Sim. to ISO 62
Water Absorption - Immersion (24 h)0.6/-1%Sim. to ISO 62
Density1570/-kg/m³ISO 1183
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying RecommendedYes--
Drying Temperature80°C-
Drying Time (Dehumidified Dryer)2.0 - 4.0h-
Processing Moisture Content≤0.2%-
Melt Temperature Optimum290°C-
Min. Melt Temperature280°C-
Max. Melt Temperature300°C-
Max. Screw Tangential Speed0.2/-m/s-
Mold Temperature Optimum100°C-
Min. Mold Temperature70°C-
Max. Mold Temperature120°C-
Hold Pressure Range50 - 100MPa-
Hold Pressure Time3s/mm-
Chemical Resistance
Chemical Type Chemical Name Resistance
Acids Acetic Acid (5% by mass) (23°C) Probably Resistant
Acids Chromic Acid solution (40% by mass) (23°C) Not Recommended
Acids Citric Acid solution (10% by mass) (23°C) Probably Resistant
Acids Hydrochloric Acid (36% by mass) (23°C) Not Recommended
Acids Lactic Acid (10% by mass) (23°C) Probably Resistant
Acids Nitric Acid (40% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (38% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (5% by mass) (23°C) Not Recommended
Alcohols Ethanol (23°C) Probably Resistant
Alcohols Isopropyl alcohol (23°C) Probably Resistant
Alcohols Methanol (23°C) Probably Resistant
Bases Ammonium Hydroxide solution (10% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (1% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (35% by mass) (23°C) Not Recommended
Ethers Diethyl ether (23°C) Probably Resistant
Hydrocarbons iso-Octane (23°C) Probably Resistant
Hydrocarbons n-Hexane (23°C) Probably Resistant
Hydrocarbons Toluene (23°C) Probably Resistant
Ketones Acetone (23°C) Probably Resistant
Mineral oils Insulating Oil (23°C) Probably Resistant
Mineral oils SAE 10W40 multigrade motor oil (130°C) Probably Resistant
Mineral oils SAE 10W40 multigrade motor oil (23°C) Probably Resistant
Mineral oils SAE 80/90 hypoid-gear oil (130°C) Probably Resistant
Other 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) Probably Resistant
Other 50% Oleic acid + 50% Olive Oil (23°C) Probably Resistant
Other DOT No. 4 Brake fluid (130°C) Probably Resistant
Other Ethyl Acetate (23°C) Probably Resistant
Other Ethylene Glycol (50% by mass) in water (108°C) Probably Resistant
Other Hydrogen peroxide (23°C) Not Recommended
Other Phenol solution (5% by mass) (23°C) Not Recommended
Other Water (23°C) Probably Resistant
Other Water (90°C) Not Recommended
Salt solutions Sodium Carbonate solution (2% by mass) (23°C) Probably Resistant
Salt solutions Sodium Carbonate solution (20% by mass) (23°C) Probably Resistant
Salt solutions Sodium Chloride solution (10% by mass) (23°C) Probably Resistant
Salt solutions Sodium Hypochlorite solution (10% by mass) (23°C) Not Recommended
Salt solutions Zinc Chloride solution (50% by mass) (23°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) Probably Resistant
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (23°C) Probably Resistant
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (90°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 1 - E5 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 2 - M15E4 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 3 - M3E7 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 4 - M15 (60°C) Probably Resistant
Standard Fuels Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) Probably Resistant
Standard Fuels Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) Probably Resistant

Regulatory & Compliance

Certifications & Compliance
OEM Specifications
OEM Standards
Compliance
UL Flame Rated

Technical Details & Test Data

Stress vs Strain (Cond.)

DuPont Zytel FR50 NC010 Stress vs Strain (Cond.)

Stress vs Strain (Dry)

DuPont Zytel FR50 NC010 Stress vs Strain (Dry)

Secant Modulus vs Strain (Cond.)

DuPont Zytel FR50 NC010 Secant Modulus vs Strain (Cond.)

Secant Modulus vs Strain (Dry)

DuPont Zytel FR50 NC010 Secant Modulus vs Strain (Dry)

Packaging & Availability

Regional Availability

Zytel® FR50 NC010
DuPont