Company logo

Zytel® FR7026V0F NC010

Sold by DuPont
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Flame Retardant
Start Order
Secure
Order Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Similar Products from DuPont NEW
TypeDocument Name
Brochure
Technology Profile Laser Welding
Technology Profile Laser Welding
Brochure
Other
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Other
Technical Data Sheet
Zytel® FR7026V0F NC010 Technical Data Sheet
Zytel® FR7026V0F NC010 Technical Data Sheet
Technical Data Sheet
Brochure
Zytel® Plus Nylon
Zytel® Plus Nylon
Brochure
Other
DuPont Zytel® SVHC Statement
DuPont Zytel® SVHC Statement
Other
Other
Failure Analysis using Microscopic Techniques
Failure Analysis using Microscopic Techniques
Other
Other
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
Other
Other
Structural and Fatigue Performance
Structural and Fatigue Performance
Other
Brochure
DuPont Performance Polymers - Self Tapping Screws
DuPont Performance Polymers - Self Tapping Screws
Brochure
Other
Minlon® and Zytel® Design Information - Module II
Minlon® and Zytel® Design Information - Module II
Other
Other
Zytel® FR7026V0F NC010 Injection Molding Guide
Zytel® FR7026V0F NC010 Injection Molding Guide
Other
Other
Zytel® FR7026V0F NC010 Regulatory Information Sheet
Zytel® FR7026V0F NC010 Regulatory Information Sheet
Other

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

Chemical Family
Plastics & Elastomers Functions
Technologies

Zytel® FR7026V0F NC010 Features & Benefits

Applications & Uses

Properties

Physical Properties
ValueUnitsTest Method / Conditions
Viscosity Number160/-cm3/gISO 307, ISO 1157, ISO 1628
Molding Shrinkage - Parallel0.9/-%ISO 294-4, 2577
Molding Shrinkage - Normal1.0/-%ISO 294-4, 2577
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus3800/1800MPaISO 527-1/-2
Yield Stress-/60MPaISO 527-1/-2
Yield Strain-/21%ISO 527-1/-2
Nominal Strain at Break-/30%ISO 527-1/-2
Stress at Break80/-MPaISO 527-1/-2
Strain at Break10/-%ISO 527-1/-2
Charpy Impact Strength (23°C)80/110kJ/m²ISO 179/1eU
Charpy Notched Impact Strength (23°C)3.5/7kJ/m²ISO 179/1eA
Charpy Notched Impact Strength (-30°C)3/2kJ/m²ISO 179/1eA
Izod Notched Impact Strength (23°C)4.4/-kJ/m²ISO 180/1A
Ball Indentation Hardness (H 358/30)-/110DSMPaISO 2039-1
Poisson's Ratio0.36/0.41--
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Temperature (10°C/min)260/-°CISO 11357-1/-3
Temperature of Deflection Under Load(1.8 MPa)80/-°CISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)230/-°CISO 75-1/-2
Specific Heat Capacity of Melt2590J/(kg K)-
Relative Temperature Index - Electrical (0.75 mm)130°CUL 746B
Relative Temperature Index - Electrical (1.5 mm)130°CUL 746B
Relative Temperature Index - Electrical (3 mm)130°CUL 746B
Relative Temperature Index - Impact (0.75 mm)95°CUL 746B
Relative Temperature Index - Impact (1.5 mm)95°CUL 746B
Relative Temperature Index - Impact (3 mm)95°CUL 746B
Relative Temperature Index - Strength (0.75 mm)110°CUL 746B
Relative Temperature Index - Strength (1.5 mm)110/-°CUL 746B
Relative Temperature Index - Strength (3 mm)110°CUL 746B
Thermal Conductivity of Melt0.17W/(m K)-
Ball Pressure Test220/-DS°CIEC 60695-10-2
Electrical Properties
ValueUnitsTest Method / Conditions
Surface Resistivity-/>1E15AohmIEC 62631-3-2
Surface Resistivity 1ohmIEC 62631-3-2
Electric Strength31/-kV/mmIEC 60243-1
Comparative Tracking Index - CTI600/--IEC 60112
Flammability
ValueUnitsTest Method / Conditions
Burning Behaviour (1.5 mm, Nominal Thickness)V-0/-classIEC 60695-11-10
Burning Behaviour (Thickness h)V-0/-classIEC 60695-11-10
Oxygen Index39/-%ISO 4589-1/-2
Glow Wire Flammability Index - GWFI (0.4m)960/-°CIEC 60695-2-12
Glow Wire Flammability Index - GWFI (0.75 mm)960/-°CIEC 60695-2-12
Glow Wire Flammability Index - GWFI (1.5 mm)960/-°CIEC 60695-2-12
Glow Wire Flammability Index - GWFI (3 mm)960/-°CIEC 60695-2-12
Glow Wire Ignition Temperature - GWIT (0.75 mm)960/-°CIEC 60695-2-13
Glow Wire Ignition Temperature - GWIT (0.4 mm)960/-°CIEC 60695-2-12
Glow Wire Ignition Temperature - GWIT (1.5 mm)960/-°CIEC 60695-2-13
Glow Wire Ignition Temperature (3 mm)960/-°CIEC 60695-2-13
FMVSS ClassDNI-ISO 3795 (FMVSS 302)
Ul RecognitionYes/--UL 94
Thickness Tested1.5/-mmIEC 60695-11-10
Other Properties
ValueUnitsTest Method / Conditions
Humidity Absorption (2 mm)2.4/-%Sim. to ISO 62
Water Absorption (2 mm)8/-%Sim. to ISO 62
Density of Melt1030kg/m³-
Density1160/-kg/m³ISO 1183
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying RecommendedYes--
Drying Temperature80°C-
Drying Time (Dehumidified Dryer)2.0 - 4.0h-
Processing Moisture Content≤0.2%-
Melt Temperature Optimum280°C-
Min. Melt Temperature270°C-
Max. Melt Temperature290°C-
Max. Screw Tangential Speed0.2/-m/s-
Mold Temperature Optimum70°C-
Min. Mold Temperature50°C-
Max. Mold Temperature90°C-
Hold Pressure Range50 - 100MPa-
Hold Pressure Time3s/mm-
Ejection Temperature210°C-
VDA Properties
ValueUnitsTest Method / Conditions
Odour5classVDA 270
Chemical Resistance
Chemical Type Chemical Name Resistance
Acids Acetic Acid (5% by mass) (23°C) Probably Resistant
Acids Chromic Acid solution (40% by mass) (23°C) Not Recommended
Acids Citric Acid solution (10% by mass) (23°C) Probably Resistant
Acids Hydrochloric Acid (36% by mass) (23°C) Not Recommended
Acids Lactic Acid (10% by mass) (23°C) Probably Resistant
Acids Nitric Acid (40% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (38% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (5% by mass) (23°C) Not Recommended
Alcohols Ethanol (23°C) Probably Resistant
Alcohols Isopropyl alcohol (23°C) Probably Resistant
Alcohols Methanol (23°C) Probably Resistant
Bases Ammonium Hydroxide solution (10% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (1% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (35% by mass) (23°C) Not Recommended
Ethers Diethyl ether (23°C) Probably Resistant
Hydrocarbons iso-Octane (23°C) Probably Resistant
Hydrocarbons n-Hexane (23°C) Probably Resistant
Hydrocarbons Toluene (23°C) Probably Resistant
Ketones Acetone (23°C) Probably Resistant
Mineral oils Insulating Oil (23°C) Probably Resistant
Mineral oils SAE 10W40 multigrade motor oil (130°C) Not Recommended
Mineral oils SAE 10W40 multigrade motor oil (23°C) Probably Resistant
Mineral oils SAE 80/90 hypoid-gear oil (130°C) Not Recommended
Other 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) Probably Resistant
Other 50% Oleic acid + 50% Olive Oil (23°C) Probably Resistant
Other DOT No. 4 Brake fluid (130°C) Not Recommended
Other Ethyl Acetate (23°C) Probably Resistant
Other Ethylene Glycol (50% by mass) in water (108°C) Not Recommended
Other Hydrogen peroxide (23°C) Not Recommended
Other Phenol solution (5% by mass) (23°C) Not Recommended
Other Water (23°C) Probably Resistant
Other Water (90°C) Not Recommended
Salt solutions Sodium Carbonate solution (2% by mass) (23°C) Probably Resistant
Salt solutions Sodium Carbonate solution (20% by mass) (23°C) Probably Resistant
Salt solutions Sodium Chloride solution (10% by mass) (23°C) Probably Resistant
Salt solutions Sodium Hypochlorite solution (10% by mass) (23°C) Not Recommended
Salt solutions Zinc Chloride solution (50% by mass) (23°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (23°C) Probably Resistant
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (90°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 1 - E5 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 2 - M15E4 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 3 - M3E7 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 4 - M15 (60°C) Probably Resistant
Standard Fuels Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) Probably Resistant
Standard Fuels Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) Probably Resistant

Regulatory & Compliance

Certifications & Compliance
Compliance
UL Flame Rated

Technical Details & Test Data

Stress vs Strain (Dry)

DuPont Zytel FR7026V0F NC010 Stress vs Strain (Dry)

Secant Modulus vs Strain (Dry)

DuPont Zytel FR7026V0F NC010 Secant Modulus vs Strain (Dry)

LTHA Stress at Break (3mm)

DuPont Zytel FR7026V0F NC010 LTHA Stress at Break (3mm)

Packaging & Availability

Regional Availability

Zytel® FR7026V0F NC010
DuPont