Company logo

Zytel® HTN51G35HSL BK083

Sold by DuPont
Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 12600.0 MPa
Start Order
Secure
Order Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Similar Products from DuPont NEW

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

Chemical Family
Fillers Included
Plastics & Elastomers Functions
Technologies

Zytel® HTN51G35HSL BK083 Features & Benefits

Applications & Uses

Properties

Color
Flame Rating
Resin ID
PA6T/XT-GF35
Filler Content
35%
Physical Properties
ValueUnitsTest Method / Conditions
Viscosity Number100/-cm³/gISO 307, 1157, 1628
Molding Shrinkage - Parallel0.2/-%ISO 294-4, 2577
Molding Shrinkage - Normal0.6/-%ISO 294-4, 2577
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus12000/11500MPaISO 527-1/-2
Stress at Break210/210MPaISO 527-1/-2
Strain at Break2.4/2.3%ISO 527-1/-2
Flexural Modulus12600/-MPaISO 178
Flexural Strength323/-MPaISO 178
Charpy Impact Strength (23°C)70/-kJ/m²ISO 179/1eU
Charpy Impact Strength (-30°C)70/40kJ/m²ISO 179/1eU
Charpy Notched Impact Strength (23°C)10/-kJ/m2ISO 179/1eA
Charpy Notched Impact Strength (-30°C)10/9kJ/m²ISO 179/1eA
Charpy Notched Impact Strength (-40°C)9/-kJ/m²ISO 179/1eA
Izod Notched Impact Strength (23°C)10/-kJ/m2ISO 180/1A
Izod Notched Impact Strength (-30°C)8/-kJ/m²ISO 180/1A
Izod Impact Strength (23°C)65/-kJ/m²ISO 180/1U
Izod Impact Strength (-30°C)67/-kJ/m²ISO 180/1U
Poisson's Ratio0.33/0.33--
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Temperature - First Heat300/-°CISO 11357-1/-3
Glass Transition Temperature (10°C/min)135/95°CISO 11357-1/-2
Temperature of Deflection Under Load(1.8 MPa)264/-°CISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)284/-°CISO 75-1/-2
Coefficient of Linear Thermal Expansion - Parallel18/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal60/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal (-40 - 23°C)57/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Normal (55 - 160°C)72/-E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion - Parallel (-40 - 23°C)20/-E-6/KISO 11359-1/-2
Relative Temperature Index - Electrical (0.75 mm)150°CUL 746B
Relative Temperature Index - Electrical (1.5 mm)150°CUL 746B
Relative Temperature Index - Electrical (3 mm)150°CUL 746B
Relative Temperature Index - Impact (0.75 mm)125°CUL 746B
Relative Temperature Index - Impact (1.5 mm)125°CUL 746B
Relative Temperature Index - Impact (3 mm)130°CUL 746B
Relative Temperature Index - Strength (0.75 mm)130°CUL 746B
Relative Temperature Index - Strength (1.5 mm)140/-°CUL 746B
Relative Temperature Index - Strength (3 mm)150°CUL 746B
Typical Properties
ValueUnitsTest Method / Conditions
Hot-Wire Ignition0-UL PLC
Hight-Current Arc Ignition0-UL PLC
Comparative Tracking Index0-UL PLC
Electrical Properties
ValueUnitsTest Method / Conditions
Relative Permittivity (100 Hz)4/--IEC 62631-2-1
Relative Permittivity (1 MHz)3.8/--IEC 62631-2-1
Dissipation Factor (100 Hz)90/-E-4IEC 62631-2-1
Dissipation Factor (1 MHz)170/-E-4IEC 62631-2-1
Comparative Tracking Index - CTI600/--IEC 60112
Volume Resistivity>1E13/-ohm.mIEC 62631-3-1
Flammability
ValueUnitsTest Method / Conditions
Burning Behaviour (1.5 mm, Nominal Thickness)HB/-classIEC 60695-11-10
Burning Behaviour (Thickness h)HB/-classIEC 60695-11-10
Oxygen Index26/-%ISO 4589-1/-2
Glow Wire Flammability Index - GWFI (1.5 mm)750/-°CIEC 60695-2-12
Glow Wire Flammability Index - GWFI (3 mm)960/-°CIEC 60695-2-12
Glow Wire Ignition Temperature - GWIT (1.5 mm)775/-°CIEC 60695-2-13
Glow Wire Ignition Temperature (3 mm)800/-°CIEC 60695-2-13
FMVSS ClassB-ISO 3795 (FMVSS 302)
Burning Rate (1 mm, Thickness)21mm/minISO 3795 (FMVSS 302)
Ul RecognitionYes/--UL 94
Thickness Tested1.5/-mmIEC 60695-11-10
Other Properties
ValueUnitsTest Method / Conditions
Density1470/-kg/m³ISO 1183
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying RecommendedYes--
Drying Temperature100°C-
Drying Time (Dehumidified Dryer)6.0 - 8.0h-
Processing Moisture Content≤0.1%-
Melt Temperature Optimum325°C-
Min. Melt Temperature320°C-
Max. Melt Temperature330°C-
Mold Temperature Optimum150°C-
Min. Mold Temperature1401°C-
Max. Mold Temperature180°C-
VDA Properties
ValueUnitsTest Method / Conditions
Odour4classVDA 270
Chemical Resistance
Chemical Type Chemical Name Resistance
Acids Acetic Acid (5% by mass) (23°C) Probably Resistant
Acids Citric Acid solution (10% by mass) (23°C) Probably Resistant
Acids Lactic Acid (10% by mass) (23°C) Probably Resistant
Other Coolant Glysantin G48, 1:1 in water (125°C) Probably Resistant
Other Ethylene Glycol (50% by mass) in water (108°C) Probably Resistant
Other Water (23°C) Probably Resistant
Other Water (90°C) Probably Resistant

Regulatory & Compliance

Certifications & Compliance
Compliance
UL Flame Rated

Technical Details & Test Data

Viscosity vs Shear Rate

DuPont Zytel HTN51G35HSL BK083 Viscosity vs Shear Rate

Shear Stress vs Shear Rate

DuPont Zytel HTN51G35HSL BK083 Shear Stress vs Shear Rate

Stress vs Strain (Cond.)

DuPont Zytel HTN51G35HSL BK083 Stress vs Strain (Cond.)

Stress vs Strain (Dry)

DuPont Zytel HTN51G35HSL BK083 Stress vs Strain (Dry)

Secant Modulus vs Strain (Cond.)

DuPont Zytel HTN51G35HSL BK083 Secant Modulus vs Strain (Cond.)

Secant Modulus vs Strain (Dry)

DuPont Zytel HTN51G35HSL BK083 Secant Modulus vs Strain (Dry)

Packaging & Availability

Regional Availability

Zytel® HTN51G35HSL BK083
DuPont