Zytel® HTN51G35HSL NC010
Sold by DuPont
Zytel® HTN51G35HSL NC010 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin. It is also a PPA resin.
Polymer Name: Polyamide 6T/XT (PA 6T/XT), Polyphthalamide (PPA)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 10300.0 MPa
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
Similar Products from DuPont NEW
TypeDocument Name
Other
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
OtherOther
DuPont Zytel® SVHC Statement
DuPont Zytel® SVHC Statement
OtherOther
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
OtherOther
Zytel® HTN Product Reference Guide
Zytel® HTN Product Reference Guide
OtherOther
Zytel® HTN Molding Guide
Zytel® HTN Molding Guide
OtherOther
Zytel® HTN51G35HSL NC010 Injection Molding Guide
Zytel® HTN51G35HSL NC010 Injection Molding Guide
OtherTechnical Data Sheet
Zytel® HTN 51G35HSL NC010 Technical Data Sheet
Zytel® HTN 51G35HSL NC010 Technical Data Sheet
Technical Data SheetOther
Zytel® HTN51G35HSL NC010 Regulatory Information Sheet
Zytel® HTN51G35HSL NC010 Regulatory Information Sheet
OtherOther
Zytel® HTN51G35HSL NC010 SVHC Declaration
Zytel® HTN51G35HSL NC010 SVHC Declaration
OtherKnowde Enhanced TDS
Identification & Functionality
Additives Included
Chemical Family
Fillers Included
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Zytel® HTN51G35HSL NC010 Features & Benefits
Applications & Uses
Markets
Applications
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Suitable Applications
- Charging Gun Head
- Socket
Properties
Chemical Resistance
Color
Flame Rating
Resin ID
Filler Content
Physical Properties
| Value | Units | Test Method / Conditions | |
| Molding Shrinkage - Parallel | 0.2/- | % | ISO 294-4, 2577 |
| Molding Shrinkage - Normal | 0.6/- | % | ISO 294-4, 2577 |
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 12000/12000 | MPa | ISO 527-1/-2 |
| Hardness, Rockwell | 108 | Scale M | ISO 2039-2 |
| Hardness, Rockwell | 124 | Scale R | ISO 2039-2 |
| Stress at Break | 210/210 | MPa | ISO 527-1/-2 |
| Strain at Break | 2.4/2.2 | % | ISO 527-1/-2 |
| Flexural Modulus | 10300/10300 | MPa | ISO 178 |
| Flexural Strength | 300/290 | MPa | ISO 178 |
| Tensile Creep Modulus (1 h) | -/11000 | MPa | ISO 899-1 |
| Tensile Creep Modulus (1000 h) | -/9500 | MPa | ISO 899-1 |
| Charpy Impact Strength (23°C) | 70/55 | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (-30°C) | 60/50 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (23°C) | 11/11 | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (-30°C) | 10/10 | kJ/m2 | ISO 179/1eA |
| Charpy Notched Impact Strength (-40°C) | 11/- | kJ/m² | ISO 179/1eA |
| Izod Notched Impact Strength (23°C) | 11/11 | kJ/m² | ISO 180/1A |
| Izod Notched Impact Strength (-30°C) | 10/10 | kJ/m² | ISO 180/1A |
| Izod Impact Strength (-30°C) | 50/40 | kJ/m² | ISO 180/1U |
| Poisson's Ratio | 0.33/0.33 | - | - |
| Coefficient of Sliding Friction (1h, Against Steel) | -/0.35 | - | ASTM 1894 |
Thermal Properties
| Value | Units | Test Method / Conditions | |
| Melting Temperature (10°C/min) | 300/- | °C | ISO 11357-1/-3 |
| Melting Temperature - First Heat | 300/- | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (10°C/min) | 135/95 | °C | ISO 11357-1/-2 |
| Temperature of Deflection Under Load(1.8 MPa) | 264/- | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 284/- | °C | ISO 75-1/-2 |
| Vicat Softening Temperature (50°C/h, 50N) | 290/- | °C | ISO 306 |
| Coefficient of Linear Thermal Expansion - Parallel | 18/- | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion - Normal | 55/- | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion - Normal (-40 - 23°C) | 55/- | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion - Parallel (-40 - 23°C) | 18/- | E-6/K | ISO 11359-1/-2 |
| Specific Heat Capacity of Melt | 1860 | J/(kg K) | - |
| Relative Temperature Index - Electrical (0.75 mm) | 150 | °C | UL 746B |
| Relative Temperature Index - Electrical (1.5 mm) | 150 | °C | UL 746B |
| Relative Temperature Index - Electrical (3 mm) | 150 | °C | UL 746B |
| Relative Temperature Index - Impact (0.75 mm) | 125 | °C | UL 746B |
| Relative Temperature Index - Impact (1.5 mm) | 125 | °C | UL 746B |
| Relative Temperature Index - Impact (3 mm) | 130 | °C | UL 746B |
| Relative Temperature Index - Strength (0.75 mm) | 130 | °C | UL 746B |
| Relative Temperature Index - Strength (1.5 mm) | 140/- | °C | UL 746B |
| Relative Temperature Index - Strength (3 mm) | 150 | °C | UL 746B |
| Thermal Conductivity of Melt | 0.25 | W/(m K) | - |
Typical Properties
| Value | Units | Test Method / Conditions | |
| Hot-Wire Ignition | 0 | - | UL PLC |
| Hight-Current Arc Ignition | 0 | - | UL PLC |
| Comparative Tracking Index | 0 | - | UL PLC |
Electrical Properties
| Value | Units | Test Method / Conditions | |
| Relative Permittivity (100 Hz) | 4/- | - | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 4/- | - | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 120/- | E-4 | IEC 62631-2-1 |
| Surface Resistivity | -/1E14 | ohm | IEC 62631-3-2 |
| Electric Strength | 36/36 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index - CTI | 600/600 | - | IEC 60112 |
| Volume Resistivity | >1E13/1E13 | ohm.m | IEC 62631-3-1 |
Flammability
| Value | Units | Test Method / Conditions | |
| Burning Behaviour (1.5 mm, Nominal Thickness) | HB/- | class | IEC 60695-11-10 |
| Burning Behaviour (Thickness h) | HB/- | class | IEC 60695-11-10 |
| Oxygen Index | 24/- | % | ISO 4589-1/-2 |
| Glow Wire Flammability Index - GWFI (0.75 mm) | 750/- | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index - GWFI (1.5 mm) | 750/- | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index - GWFI (3 mm) | 960/- | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature - GWIT (1.5 mm) | 775/- | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (3 mm) | 800/- | °C | IEC 60695-2-13 |
| FMVSS Class | B | - | ISO 3795 (FMVSS 302) |
| Burning Rate (1 mm, Thickness) | 23 | mm/min | ISO 3795 (FMVSS 302) |
| Ul Recognition | Yes/- | - | UL 94 |
| Thickness Tested | 1.5/- | mm | IEC 60695-11-10 |
Other Properties
| Value | Units | Test Method / Conditions | |
| Water Absorption (2 mm) | 4.5/- | % | Sim. to ISO 62 |
| Density | 1470/- | kg/m³ | ISO 1183 |
| Density of Melt | 1230 | kg/m³ | - |
Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Drying Recommended | Yes | - | - |
| Drying Temperature | 100 | °C | - |
| Drying Time (Dehumidified Dryer) | 6.0 - 8.0 | h | - |
| Processing Moisture Content | ≤0.1 | % | - |
| Melt Temperature Optimum | 325 | °C | - |
| Min. Melt Temperature | 320 | °C | - |
| Max. Melt Temperature | 330 | °C | - |
| Mold Temperature Optimum | 150 | °C | - |
| Min. Mold Temperature | 1401 | °C | - |
| Max. Mold Temperature | 180 | °C | - |
VDA Properties
| Value | Units | Test Method / Conditions | |
| Odour | 4 | class | VDA 270 |
Chemical Resistance
| Chemical Type | Chemical Name | Resistance |
| Acids | Acetic Acid (5% by mass) (23°C) | Probably Resistant |
| Acids | Citric Acid solution (10% by mass) (23°C) | Probably Resistant |
| Acids | Lactic Acid (10% by mass) (23°C) | Probably Resistant |
| Mineral oils | Automatic hypoid-gear oil Shell Donax TX (135°C) | Probably Resistant |
| Mineral oils | Hydraulic oil Pentosin CHF 202 (125°C) | Probably Resistant |
| Mineral oils | Insulating Oil (23°C) | Probably Resistant |
| Mineral oils | Motor oil OS206 304 Ref.Eng.Oil, ISP (135°C) | Probably Resistant |
| Mineral oils | SAE 10W40 multigrade motor oil (130°C) | Probably Resistant |
| Mineral oils | SAE 10W40 multigrade motor oil (23°C) | Probably Resistant |
| Mineral oils | SAE 80/90 hypoid-gear oil (130°C) | Probably Resistant |
| Other | Coolant Glysantin G48, 1:1 in water (125°C) | Probably Resistant |
| Other | Ethylene Glycol (50% by mass) in water (108°C) | Probably Resistant |
| Other | Water (23°C) | Probably Resistant |
| Other | Water (90°C) | Probably Resistant |
| Standard Fuels | Diesel EN 590 (100°C) | Probably Resistant |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) | Probably Resistant |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (23°C) | Probably Resistant |
| Standard Fuels | Diesel fuel (pref. ISO 1817 Liquid F) (90°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 1 - E5 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 2 - M15E4 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 3 - M3E7 (60°C) | Probably Resistant |
| Standard Fuels | ISO 1817 Liquid 4 - M15 (60°C) | Probably Resistant |
| Standard Fuels | Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) | Probably Resistant |
| Standard Fuels | Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) | Probably Resistant |
Regulatory & Compliance
Certifications & Compliance
Compliance
Technical Details & Test Data
Viscosity vs Shear Rate
Shear Stress vs Shear Rate
Dynamic Shear Modulus vs Temperature (Dry)
Stress vs Strain (Cond.)
Stress vs Strain (Dry)
Secant Modulus vs Strain (Cond.)
Secant Modulus vs Strain (Dry)
Stress vs Strain (Isochronous, 23°C, Cond)
Creep Modulus vs Time (23°C, Cond.)
Creep Modulus vs Time (100°C, Dry)
Stress vs Strain (Isochronous, 100°C, Dry)
Creep Modulus vs Time (150°C, Dry)
Stress vs Strain (Isochronous, 150°C, Dry)
Tensile Modulus vs Temperature (Cond.)
Tensile Modulus vs Temperature (Dry)
Packaging & Availability
Country Availability
Regional Availability
Zytel® HTN51G35HSL NC010
DuPont